Share:


Laser Scanner Targets RSL-X80 and RSL-X90M

  • Excellently suited to scanners from Leica, Geomax and Faro
  • Fixed points for connecting several positions
  • Allocation of spatial reference information to a geospatial dataset

The following products have the same XYZ coordinates when using the fixed point RSFP-X80:

  1. Mini Prisms RSMP280 and RSMP380
  2. Reflective targets RS183
  3. Laser Scanner Target RSL-X80
  4. Marker for drones RSL580-10 and RSL580-20
  5. In combination with survey mark RSFP-X80, any of the listed mini-prisms or targets can be set up at the same point again and again

For repeat measurements, only the Fixed Point is left on the building (e.g. on a façade).

The following products have the same XYZ coordinates when using the fixed point RSFP-X90M:

  1. Mini Prisms RSMP290M and RSMP390M
  2. Reflective targets RS193M
  3. Laser Scanner Target RSL-X90M
  4. Marker for drones RSL590M-10 and RSL590M-20
  5. In combination with survey mark RSFP-X90, any of the listed mini-prisms or targets can be set up at the same point again and again
For repeat measurements, only a small, barely visible, stainless steel survey mark is left on the building (e.g. on a façade).
  • The reflective targtes, mini-prisms, laser scanner targets or drone targets are fitted on the survey marks just for the measurements.
  • When using both Fixed Points, the same measuring point can be used for measurements with the tachymeter, total station, laser scanner and drone
  • If need be, the laser scanner targets can also be permanently glued or fixed


 Inquiry - Laser Scanner Targets RSL-X80 and RSL-X90M