Share:
- Find, follow and avoid buried insulated cables
- Wide, 100mm diameter
- No need to remove the conductor’s insulation
100mm Signal Clamp Details
The P.A.C.T. 100mm Signal Clamp can be used with P.A.C.T.’s SIGEN2+ Signal Transmitter and TOMKAT Pipe and Cable Locators to locate, trace and avoid buried insulated cables.
The P.A.C.T. Signal Clamp’s wide, 100mm diameter ensures that it is able to establish a good, safe connection with the conductor without having to remove any of the cable’s insulation. As a result, it is able to apply a signal directly to the cable.
The P.A.C.T. 100mm Signal Clamp is designed to be used in accordance with the following method:
1.) Plug the P.A.C.T. 100mm Signal Clamp’s bulgin plug into the SIGEN2+ Signal Transmitter’s connection socket
2.) Place the clamp’s jaws around the insulated cable ensuring that the jaws are completely shut
3.) Turn on the SIGEN 2+
4.) Set the P.A.C.T. TOMKAT Pipe and Cable Locator to Genny (Generator) mode
5.) Trace the cable
The P.A.C.T. 100mm Signal Clamp is ideal for finding, following and thereby avoiding buried insulated cables, such as those used by streetlights. It is of particular use to builders and electricians.
100mm Signal Clamp Key Features
- Designed for use with P.A.C.T.’s SIGEN2+ Signal Transmitter and TOMKAT Pipe and Cable Locators
- Can be used with the above instruments to locate, trace and avoid buried insulated cables
- Wide, 100mm diameter
- Able to establish a good, safe connection with the conductor without having to remove any insulation
- Apply a signal directly to the cable
- Ideal for finding, following and avoiding buried insulated cables such as those used by streetlights
- Of particular use to builders and electricians
Inquiry - 100MM SIGNAL CLAMP
