How to Use Tomkat V2 Pipe & Cable Locator with SIGEN 2+ Signal Transmitter Malaysia
How to Use Tomkat V2 Pipe & Cable Locator with SIGEN 2+ Signal Transmitter Malaysia
Introduction
Accurately locating underground utilities before excavation is one of the most important steps in preventing costly damage and improving job site safety. While the Tomkat V2 Pipe & Cable Locator can detect utilities using Power Mode and Radio Mode, the highest level of accuracy is achieved when it is used together with the SIGEN 2+ Signal Transmitter.
This guide explains how to use the Tomkat V2 with the SIGEN 2+ Builder's Kit for professional underground cable and pipe locating.
Step 1 – Identify the Utility to be Traced
Before connecting the transmitter, determine which underground service you want to locate.
Typical utilities include:
Electrical power cables
Water pipelines
Gas pipelines
Telecommunication cables
Fibre optic ducts
Metallic conduits
If the utility is non-metallic (such as a PVC drain pipe), use the included 5m Sonde (33kHz) instead.
Step 2 – Connect the SIGEN 2+ Signal Transmitter
The Builder's Kit includes:
SIGEN 2+ Signal Transmitter
Earth Stake
Connection Leads
Connect the transmitter directly to the exposed cable or metallic pipe using the supplied connection leads.
Where direct access is not possible, use the 100mm Signal Clamp to apply the signal safely without disconnecting the cable.
Step 3 – Switch the Tomkat V2 to Genny Mode
After the transmitter is activated:
Turn on the Tomkat V2 receiver.
Select Genny Mode.
Walk slowly along the expected cable route.
Follow the strongest signal.
The receiver provides:
Clear visual indication
Audible signal changes
Accurate cable direction
This makes locating buried utilities faster and more reliable.
Step 4 – Trace the Underground Utility
Move the receiver across the ground in a steady, controlled manner.
As you approach the buried utility:
Signal strength increases.
Audio response becomes stronger.
The utility route becomes easier to identify.
Mark the detected path before excavation begins.
Step 5 – Locate Plastic Pipes with the Sonde
Plastic pipes cannot normally be detected directly because they do not conduct electrical signals.
Insert the included 5m Sonde (33kHz) into:
Sewer pipes
Drainage systems
PVC conduits
Underground ducts
The Tomkat V2 will detect the Sonde signal, allowing you to trace the route and estimate the depth of the non-metallic pipe.
Tips for Better Accuracy
For the best results:
Use Genny Mode whenever possible for precise tracing.
Scan the area from different directions to confirm the utility route.
Keep the receiver upright and at a consistent height.
Avoid rushing the survey; move slowly for stable signal readings.
Clearly mark the utility path before excavation.
These practices improve accuracy and reduce the risk of accidental utility damage.
Typical Applications
The Tomkat V2 with SIGEN 2+ is suitable for:
Utility locating before excavation
Road construction
Building foundations
Water pipeline maintenance
Electrical cable installation
Telecommunication projects
Industrial maintenance
Municipal infrastructure works
Survey and mapping
Why Choose Tomkat V2?
The Tomkat V2 offers:
Detection depth up to 3 metres
Three locating modes: Power, Radio, and Genny
Visual and audible alerts
Easy operation for field crews
Compatibility with the SIGEN 2+ Signal Transmitter
Reliable performance in demanding construction environments
Why Buy from MTM Precision?
MTM Precision Sdn Bhd is a trusted supplier of underground utility locating equipment in Malaysia.
We provide:
Local stock availability
Product demonstrations
Technical consultation
After-sales support
Fast delivery across Malaysia
Our team can also advise on the most suitable locating solution for your construction, utility, or infrastructure projects.
Contact MTM Precision
Website: www.mtmpre.com.my
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Need a reliable underground utility locating solution? Contact MTM Precision Sdn Bhd today to learn more about the Tomkat V2 Pipe & Cable Locator and SIGEN 2+ Signal Transmitter Builder's Kit, designed to help contractors locate buried cables and pipes safely and efficiently throughout Malaysia.
04 Aug 2026
