Wintact WT-100A Ultrasonic Thickness Gauge for Storage Tank Inspection Malaysia
Wintact WT-100A Ultrasonic Thickness Gauge for Storage Tank Inspection Malaysia
Copy Link
Storage tanks are widely used throughout Malaysia for storing water, chemicals, fuel, process liquids and other industrial materials. Over time, tank walls and other components may experience corrosion, erosion and gradual material loss.
The Wintact WT-100A Ultrasonic Thickness Gauge provides a convenient non-destructive method for measuring the remaining thickness of suitable tank materials without cutting the tank wall.
For factory maintenance teams, engineers and inspection personnel, regular ultrasonic thickness measurement can provide useful information for monitoring tank condition and identifying areas that may require further investigation.
Why Is Storage Tank Thickness Inspection Important?
A storage tank can appear normal externally while its wall thickness is gradually decreasing.
Possible causes of material loss include:
Internal corrosion
External corrosion
Chemical exposure
Moisture
Environmental conditions
Long-term operation
Mechanical wear
Localised deterioration
Measuring the remaining material thickness helps maintenance teams understand the condition of the tank instead of relying only on visual inspection.
How the Wintact WT-100A Can Be Used
The WT-100A uses ultrasonic technology to determine the thickness of suitable materials.
For appropriate applications, technicians can take measurements from one accessible side of the tank wall.
This makes ultrasonic thickness testing useful for checking areas such as:
Tank shell plates
Selected accessible tank sections
Process tanks
Water tanks
Industrial storage vessels
Steel containers
Fabricated vessels
Actual inspection procedures should always follow the site's engineering and safety requirements.
Build a Thickness Monitoring Record
The real value of ultrasonic thickness measurement is not limited to taking a single reading.
Maintenance teams can establish permanent or repeatable measurement locations and record results during scheduled inspections.
For example:
Location A: Previous Reading → Current Reading → Thickness Change
Location B: Previous Reading → Current Reading → Thickness Change
Location C: Previous Reading → Current Reading → Thickness Change
Over time, these records can help identify areas experiencing faster material loss.
Useful for Preventive Maintenance
Thickness monitoring can support preventive maintenance by helping teams:
Identify potential wall thinning
Monitor corrosion trends
Compare different areas of a tank
Prioritise further inspection
Plan maintenance activities
Reduce reliance on visual inspection alone
Maintain historical inspection records
The WT-100A should be regarded as a measurement tool within an overall inspection program rather than a substitute for engineering assessment or statutory inspection where required.
Typical Industries in Malaysia
Storage tank thickness measurements may be relevant to:
Palm oil mills
Manufacturing factories
Chemical processing plants
Water treatment facilities
Food processing plants
Petrochemical facilities
Oil & gas operations
Marine facilities
Engineering companies
Industrial maintenance contractors
How to Measure Tank Wall Thickness
A typical ultrasonic thickness measurement process may involve:
Identify the inspection location.
Clean dirt, rust or loose material from the surface.
Configure the instrument for the material being measured.
Apply suitable ultrasonic couplant.
Position the probe correctly.
Obtain a stable reading.
Record the thickness and measurement location.
Repeat at other predetermined points.
Surface condition, material properties, geometry and operator technique can affect ultrasonic measurements, so appropriate inspection procedures should be followed.
From Thickness Measurement to Condition Monitoring
Instead of simply asking:
“What is the thickness of this tank?”
a better maintenance question is:
“Has the tank wall become thinner since the previous inspection?”
When measurements are taken consistently over time, ultrasonic thickness testing can help turn individual readings into useful condition-monitoring information.
Looking for an Ultrasonic Thickness Gauge in Malaysia?
MTM Precision supplies ultrasonic thickness gauges and a range of industrial testing and measuring instruments for maintenance, engineering, manufacturing and inspection applications in Malaysia.
Customers can discuss their application, material and expected measurement requirements with MTM Precision when selecting a suitable thickness gauge.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
10 Aug 2026
