Temperature & Humidity Data Logging for Clean Rooms with TENMARS TM-305U Malaysia
Temperature & Humidity Data Logging for Clean Rooms with TENMARS TM-305U Malaysia
Clean rooms and controlled environments often require closer attention to temperature and relative humidity than ordinary workplaces.
Environmental conditions can affect personnel comfort, manufacturing processes, materials, equipment and product quality. While permanent monitoring systems may be required for critical or regulated applications, a portable temperature and humidity data logger can also be valuable for supplementary monitoring, troubleshooting and environmental studies.
The TENMARS TM-305U Temperature & Humidity Datalogger provides continuous temperature and relative humidity recording for applications including clean rooms and other controlled environments in Malaysia.
Why Monitor Temperature and Humidity in a Clean Room?
A clean room is primarily associated with contamination control, but temperature and humidity can also be important environmental parameters.
Depending on the process, changes in these conditions may influence:
Process stability
Product quality
Material behaviour
Personnel comfort
Static electricity conditions
Moisture-sensitive materials
Equipment operation
Packaging
Storage conditions
The acceptable temperature and humidity range depends on the particular process, facility requirements and applicable standards.
There is no single universal setting suitable for every clean room.
Spot Measurement vs Continuous Data Logging
A handheld temperature and humidity meter is useful for checking environmental conditions at a specific moment.
For example:
Temperature: acceptable now.
Humidity: acceptable now.
But this does not reveal what happened several hours earlier.
A data logger provides a different type of information by recording measurements over time.
This helps answer questions such as:
Did humidity increase overnight?
Does temperature rise during full production?
Are environmental conditions different during weekends?
What happens when the HVAC system changes operating mode?
How quickly does the room recover after an interruption?
These questions require historical information rather than a single reading.
TENMARS TM-305U Measurement Capability
The TENMARS TM-305U measures:
Temperature: -40°C to 85°C
Relative Humidity: 1%RH to 99%RH
It can store up to 25,000 records, allowing users to build a historical record of environmental conditions.
This makes the instrument useful for supplementary monitoring and investigation in controlled environments.
Why Historical Data Is Useful
Imagine that a clean room operator notices an occasional humidity problem.
Every time maintenance personnel check the room, conditions appear normal.
The problem may occur only:
Late at night
During HVAC cycling
During production changes
During maintenance
After doors are opened frequently
During weekends
Under certain weather conditions
Continuous data logging can help identify when the environmental change actually occurs.
Once the timing is known, facility and maintenance teams have more information for further investigation.
USB Data Download
The TM-305U provides USB connectivity for downloading recorded measurements to a computer.
Using the supporting PC software, users can review environmental information collected during the monitoring period.
This allows teams to study:
Temperature trends
Humidity trends
Maximum and minimum conditions
Environmental excursions
Repeated patterns
Changes during different operating periods
Historical information can be especially valuable when comparing environmental behaviour before and after maintenance or HVAC adjustments.
Application: Investigating High Humidity
Suppose relative humidity occasionally rises above the facility's desired operating range.
A portable data logger can be positioned in the affected area to record conditions continuously.
The resulting information may help determine whether the increase occurs:
At a particular time
During HVAC shutdown
During production
After door opening
During cleaning
Overnight
During weekends
The data logger does not automatically determine why humidity changed.
Instead, it provides measurement evidence that can support troubleshooting.
Application: Comparing Different Clean Room Areas
Environmental conditions may not be identical throughout a controlled area.
If required by the monitoring objective, multiple data loggers can be positioned at different locations.
This can help compare:
Different rooms
Different production zones
Areas near entrances
Areas farther from HVAC outlets
Upper and lower locations
Storage areas
Suspected environmental problem areas
The objective should be defined before selecting the monitoring positions.
Application: Before and After HVAC Maintenance
Portable data logging can also be useful when evaluating environmental behaviour before and after HVAC maintenance.
For example:
Before maintenance: Record temperature and humidity for a selected period.
Maintenance: Service or adjust the HVAC system.
After maintenance: Repeat the monitoring under comparable operating conditions.
The two sets of information can then be reviewed.
This does not replace formal HVAC commissioning or validation, but it can provide useful supplementary environmental data.
Application: Temporary Environmental Investigation
Not every facility requires an additional permanent monitoring point.
Sometimes the requirement is temporary.
Examples include:
Investigating a complaint
Checking a suspected hot spot
Studying overnight conditions
Monitoring after maintenance
Comparing two locations
Checking a temporary storage area
Investigating unusual humidity
A portable logger is particularly useful for these temporary investigations because it can be moved between locations.
Internal Temperature and Humidity Alarm
The TENMARS TM-305U provides internal temperature and humidity alarm functionality.
Monitoring limits can be established according to the requirements of the application.
This can help users identify periods when the measured environment moves outside the selected limits.
However, the correct limits should be based on the applicable process requirements, internal procedures or relevant standards.
Important: Portable Logger vs Permanent Monitoring System
This distinction is important.
A portable data logger should not automatically be considered a replacement for a validated or permanently installed environmental monitoring system.
Critical clean room applications may require:
Continuous central monitoring
Calibration requirements
Validation
Audit trails
Specific sensor placement
Alarm notification
Redundancy
Regulatory compliance
Documented procedures
The exact requirements depend on the industry and application.
The TENMARS TM-305U is better positioned as a portable environmental data logging instrument for supplementary measurements, investigations and selected monitoring tasks where its specifications meet the user's requirements.
Where Should the Logger Be Positioned?
Correct placement is essential.
A logger installed directly beside an HVAC supply outlet may not represent general room conditions.
Possible monitoring locations depend on the objective and may include:
Work areas
Production areas
Storage areas
Locations with previous environmental problems
Areas near entrances
Different room zones
For formal clean room monitoring, sensor placement should follow the applicable facility procedure, validation plan or regulatory requirement.
IP54 Enclosure
The TM-305U features an IP54 enclosure, adding protection for industrial environmental monitoring applications.
However, IP54 does not mean that the instrument is fully waterproof or suitable for immersion.
Users should always ensure that the logger is installed in an environment compatible with its specifications.
Who Can Use Portable Clean Room Data Logging?
Potential users include:
Clean room operators
QA/QC departments
Facility management teams
HVAC contractors
Maintenance departments
Manufacturing plants
Electronics manufacturers
Laboratories
Industrial facilities
Environmental monitoring personnel
The TM-305U can be especially useful when a team needs to investigate environmental changes over a defined period.
Beyond Clean Rooms
TENMARS also identifies several other applications for the TM-305U, including:
HVAC
Warehouses
Refrigerators
Freezers
Shipping vans
Shipping crates
Cargo vessels
Storage areas
This allows the instrument to support multiple environmental monitoring requirements within the same organisation.
Why Use a Data Logger Instead of Manual Recording?
Manual recording may be suitable for some applications.
However, it has practical limitations.
Personnel may only take measurements several times per day.
Environmental changes between those readings can be missed.
Continuous data logging provides a much more detailed history.
Instead of:
9:00 AM — Normal
1:00 PM — Normal
5:00 PM — Normal
users can collect measurements throughout the selected monitoring period.
This makes intermittent environmental changes easier to investigate.
TENMARS TM-305U Clean Room Temperature & Humidity Data Logger Malaysia
MTM Precision supplies TENMARS environmental monitoring and industrial testing instruments in Malaysia.
If you require a portable data logger for clean room investigation, HVAC troubleshooting, warehouse monitoring, refrigeration, storage or transportation, contact MTM Precision with your application requirements.
For controlled or regulated environments, users should also confirm that the instrument specifications, calibration requirements and monitoring method comply with their applicable procedures and standards.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
Looking for a portable temperature and humidity data logger for clean room or controlled-environment monitoring in Malaysia? Contact MTM Precision for TENMARS TM-305U product information and quotation.
13 Aug 2026