Slump Cone Set for Site Storekeeper, Project Store & Equipment Controller in Malaysia
Slump Cone Set for Site Storekeeper, Project Store & Equipment Controller in Malaysia
Introduction
Site storekeepers, project store personnel, equipment controllers, warehouse assistants, and construction asset coordinators are another important audience for Slump Cone Complete Sets and concrete testing equipment.
On many construction projects, store personnel are responsible for:
Receiving equipment
Checking quantities
Issuing equipment to site teams
Recording equipment movement
Tracking missing components
Receiving returned equipment
Identifying damaged items
Maintaining spare stock
Preparing equipment for new work fronts
Supporting project close-out
For a Slump Cone Complete Set, this role is particularly important because the set contains several separate components that can easily become mixed between teams.
At MTM Precision Sdn. Bhd., our standard Slump Cone Complete Set consists of four items:
Slump Cone – 1.5mm thickness
Base Plate – 40 × 40cm
Slump Measuring Scale / Measuring Frame
Tamping Rod – 50cm standard
Customers requiring a longer Tamping Rod can select the 60cm version at additional cost.
Storekeepers Should Receive Complete Sets, Not Just Count Cones
A delivery may be described as:
5 Slump Cone Complete Sets
The storekeeper should not simply count:
5 Slump Cones
and sign the Delivery Order.
The complete delivery should contain the corresponding four components for each set.
MTM Precision Standard Slump Cone Complete Set
The standard package consists of:
SLUMP CONE
1.5mm thickness
BASE PLATE
40 × 40cm
SLUMP MEASURING SCALE / MEASURING FRAME
Included
TAMPING ROD
50cm standard
Optional:
60cm Tamping Rod – Additional Charge
This gives the store team a clear receiving reference.
Example Receiving Quantity
If the PO says:
5 Complete Sets
the store should expect:
SLUMP CONES
5
BASE PLATES
5
MEASURING SCALES / FRAMES
5
TAMPING RODS
5
Then confirm the required rod length.
One Missing Component Means One Incomplete Set
Suppose delivery contains:
5 Slump Cones
5 Base Plates
5 Measuring Scales
but:
4 Tamping Rods
The store should not record:
5 Complete Sets Received
A more accurate record is:
COMPLETE SETS
4
INCOMPLETE SETS
1
SHORTAGE
1 Tamping Rod
This makes follow-up easier.
Store Receiving Checklist
For each set:
ITEM 1
Slump Cone – ✓
ITEM 2
40 × 40cm Base Plate – ✓
ITEM 3
Slump Measuring Scale / Measuring Frame – ✓
ITEM 4
Tamping Rod – ✓
Rod Length – ✓
This simple checklist can prevent many later disputes.
Check 50cm or 60cm Tamping Rod
The MTM Precision standard complete set comes with:
50cm Tamping Rod
Where the customer orders:
60cm Tamping Rod
the longer version is supplied at additional cost.
The store should therefore verify the rod length against the PO.
Goods Receiving Should Match the PO Description
If the PO states:
Slump Cone Complete Set – 1.5mm – 40 × 40cm Base Plate – Measuring Scale – 50cm Tamping Rod
the receiving record should retain that description.
Do not reduce it to:
Slump Cone
because that loses important information.
Storekeepers Can Help Prevent Future Purchasing Confusion
A clear receiving description creates a useful reference for future orders.
Later, procurement can ask:
“What did we buy last time?”
and the store record can show the exact configuration.
Label Every Complete Set
For example:
SC-01
SC-02
SC-03
SC-04
Each component can carry the same identifier.
Matching Component Labels
For SC-01:
SC-01 Cone
SC-01 Base Plate
SC-01 Measuring Scale
SC-01 Tamping Rod
This helps keep sets together after issue and return.
Avoid Loose Unidentified Components
A common project store can eventually contain:
3 Slump Cones
2 Base Plates
4 Tamping Rods
2 Measuring Scales
with no idea which pieces belong together.
That makes issue control much harder.
Store Equipment by Complete Set
Where practical, store:
SC-01
All four components together
SC-02
All four components together
SC-03
All four components together
This makes dispatch faster.
Issue Complete Sets to Teams
Instead of issuing:
1 Cone
today,
then:
1 Rod
tomorrow,
issue:
SC-01 Complete Set
to the work front.
This simplifies accountability.
Example Equipment Issue
DATE
Project Date
ISSUED TO
Tower A QA/QC
EQUIPMENT
SC-01 Complete Set
COMPONENTS
Cone
Base Plate
Measuring Scale / Frame
Tamping Rod
STATUS
Complete
This gives the store a clear record.
Return Should Also Be Checked as a Complete Set
When the team returns SC-01:
Cone – returned
Base Plate – returned
Measuring Scale – returned
Tamping Rod – returned
Only then should the set be marked:
Available
Don't Mark a Set Available Before Checking It
A team returns:
the Cone
and:
the Base Plate
The storekeeper marks:
SC-01 Available
The next team comes to collect it.
Then everyone discovers:
Measuring Scale and Tamping Rod are still at the work front.
A complete return check avoids this.
Equipment Status Categories
A practical store register can use:
AVAILABLE
Complete and ready
ISSUED
Currently with work front
INCOMPLETE
Missing one or more components
DAMAGED
Needs review
SPARE
Held for backup
This is more useful than one total quantity.
Example Store Register
SC-01
Issued – Tower A
SC-02
Issued – Civil Team
SC-03
Available
SC-04
Spare
SC-05
Incomplete – Missing Measuring Scale
This gives the project team immediate visibility.
Count Complete Sets, Not Loose Parts
Suppose the store has:
8 Slump Cones
7 Base Plates
6 Measuring Scales
8 Tamping Rods
The maximum number of complete sets is:
6
This is the number that matters operationally.
Loose Parts Can Still Be Recorded Separately
For example:
COMPLETE SETS
6
EXTRA SLUMP CONES
2
EXTRA BASE PLATES
1
EXTRA TAMPING RODS
2
This gives purchasing a much better picture.
Storekeeper Can Identify What Needs Replacing
Suppose:
SC-05 – Missing Measuring Scale
and:
SC-06 – Missing Base Plate
Procurement may only need to review those missing components rather than automatically buying two full sets.
But Store Should Also Consider New Project Demand
Replacement alone is not the whole story.
If:
two new work fronts start
the company may still require additional complete sets.
So the store report should include both:
existing shortages
and:
current available stock
Project Store Can Support Mobilisation
When another work front begins:
QA/QC requests equipment
↓
Store checks available stock
↓
Complete set issued
↓
Shortage reported if necessary
This makes project mobilisation smoother.
Central Store Can Support Multiple Projects
A construction company may maintain a central warehouse.
For example:
PROJECT A
3 Sets issued
PROJECT B
2 Sets issued
PROJECT C
1 Set issued
CENTRAL STORE
2 Sets available
This gives head office a useful company-wide view.
New Project Request
Project D may request:
3 Slump Cone Complete Sets
Central store has:
2 available
The store can immediately report:
1 additional set required
This gives procurement a precise requirement.
Equipment Transfer Between Projects
When Project A finishes:
SC-01
SC-02
can be returned to central store.
After inspection, they may be reissued to Project D.
This reduces unnecessary purchasing.
Project Completion Recovery Is Important
Equipment should not disappear when a project demobilises.
The close-out process can include:
Slump Cone Sets
Plastic Concrete Cube Moulds
Cast Iron Concrete Cube Moulds
Concrete Test Hammer
Other reusable QA/QC equipment
Storekeepers Can Help Recover Missing Components Before Demobilisation
It is easier to find:
one missing Tamping Rod
while the project team is still on site
than:
three months after everyone has left.
Close-out equipment checks should happen early enough to act.
Plastic Concrete Cube Mould Inventory
Project stores may also manage:
Plastic Concrete Cube Moulds
These can be tracked as:
AVAILABLE
Ready for issue
ISSUED
With QA/QC team
IN USE
Currently occupied
DAMAGED
Not available
MISSING
Not located
This helps prevent Cube Mould shortages.
Cube Mould Quantity Should Be Separate From Slump Cone Quantity
A store may have:
4 Slump Cone Complete Sets
and:
30 Plastic Concrete Cube Moulds
These are different equipment categories with different circulation patterns.
They should not be counted together.
Cast Iron Concrete Cube Mould Inventory
Where used, Cast Iron Concrete Cube Moulds may also be stored and tracked separately.
Because they may remain in a fixed laboratory environment, their issue pattern can differ from mobile Plastic Cube Moulds.
Concrete Test Hammer Inventory
A:
Concrete Test Hammer
can also be issued through the project store or laboratory equipment store.
This creates a broader concrete testing inventory:
Slump Cone Complete Set
Plastic Concrete Cube Mould
Cast Iron Concrete Cube Mould
Concrete Test Hammer
Storekeepers Can Prepare QA/QC Equipment Packages
For a new work front:
PACKAGE A
1 × Slump Cone Complete Set
Plastic Concrete Cube Moulds – Required Quantity
Other applicable testing equipment
This can be prepared before the team mobilises.
Mobile QA/QC Vehicle Package
For a new vehicle:
QC VAN 01
SC-01
Plastic Cube Moulds – Required Quantity
Other applicable equipment
The vehicle can then leave with a complete package.
Store Issue Checklist for QC Vehicle
Before dispatch:
Cone – ✓
Base Plate – ✓
Measuring Scale – ✓
Tamping Rod – ✓
Correct Rod Length – ✓
Cube Mould Quantity – ✓
This reduces return trips.
Spare Stock Should Be Real Spare Stock
If the register says:
2 spare sets
but one has no Base Plate and the other has no Measuring Scale, the project has:
0 complete spare sets
The spare category should only include usable complete sets.
Spare Set Should Not Become a Parts Donor
A spare set often gets slowly dismantled:
someone borrows the rod
then:
someone borrows the Base Plate
Soon the “spare set” is a label attached to empty shelf space.
Keep spare equipment complete where possible.
Minimum Stock Review
For companies with frequent projects, the central store can review:
How many complete sets should remain available?
The answer depends on the company's operations, project pipeline, and internal policy.
New Project Pipeline Can Affect Stock Planning
Suppose:
Project D starts next month
and:
Project E starts two weeks later
Central store can review stock before both projects begin.
This reduces emergency procurement.
Storekeepers Are Important Procurement Informants
Procurement may ask:
“Do we need more Slump Cone Sets?”
The storekeeper can answer using actual inventory:
3 available
2 issued
1 incomplete
new project requires 4
This gives procurement useful numbers.
Avoid Ordering Based on Old Spreadsheet Quantities
A spreadsheet may say:
10 Sets
But physically:
6 are on projects
2 are incomplete
1 is missing
1 is actually available
Physical verification matters.
Periodic Physical Stock Check
A useful routine can be:
Count
↓
Check component completeness
↓
Check condition
↓
Update status
↓
Report shortages
This keeps inventory more accurate.
Example Monthly Equipment Audit
SLUMP CONE SETS
Complete Available – 3
Issued – 4
Spare – 1
Incomplete – 2
PLASTIC CUBE MOULDS
Available – Required Quantity
Issued – Required Quantity
Damaged – Required Quantity
This gives management a useful overview.
New Storekeeper Handover
When store personnel change, the handover should include:
Equipment register
Issued sets
Spare sets
Incomplete sets
Missing components
Outstanding returns
This prevents inventory knowledge from leaving with one employee.
Example Project Store RFQ
PRODUCT
Slump Cone Complete Set
QUANTITY
5 Sets
SPECIFICATION
Slump Cone – 1.5mm thickness
Base Plate – 40 × 40cm
Slump Measuring Scale / Measuring Frame – Included
Tamping Rod – 50cm
APPLICATION
Project Store / Construction Site QA/QC
This gives procurement a clear requirement.
Example Central Store Replenishment RFQ
ITEM 1
Slump Cone Complete Set – 10 Sets
ITEM 2
Plastic Concrete Cube Mould – Required Quantity
APPLICATION
Central Construction Equipment Store
This allows stock to support multiple projects.
Example Replacement Stock RFQ
ITEM 1
Slump Cone Complete Set – Required Quantity
ITEM 2
Plastic Concrete Cube Mould – Required Quantity
ITEM 3
Concrete Test Hammer – Required Quantity
APPLICATION
Replacement / Spare QA/QC Equipment
This creates a broader replenishment order.
Example Mixed Tamping Rod Stock
STANDARD STOCK
Slump Cone Complete Set with 50cm Tamping Rod
OPTIONAL STOCK
Slump Cone Complete Set with 60cm Tamping Rod
The 60cm option can be supplied at additional cost.
Example Multi-Project Allocation
PROJECT A
SC-01, SC-02
PROJECT B
SC-03, SC-04
PROJECT C
SC-05
CENTRAL STORE
SC-06, SC-07
SPARE
SC-08
This makes equipment movement easier to understand.
Storekeepers Can Reduce Duplicate Purchases
A project may request:
2 new sets
while the store has:
2 complete sets returned yesterday
Accurate stock visibility can prevent unnecessary purchases.
Storekeepers Can Also Prevent Under-Purchasing
The opposite can happen too.
Management believes:
“We already have five sets.”
But store records show:
2 complete
3 incomplete
Now procurement has a clear reason to act.
Equipment Control Supports Faster Site Mobilisation
When equipment is organised, the process becomes:
Request received
↓
Complete set identified
↓
Issue recorded
↓
Team mobilised
No searching, no guessing, no archaeology expedition through the project store.
Site Storekeepers Can Become Strong Purchasing Influencers
They may not approve the budget, but they know:
What is physically available
What is missing
What is damaged
What has not been returned
What new teams are requesting
This makes store feedback important to procurement.
Repeat Demand Can Come From Many Events
Potential purchasing triggers include:
New project mobilisation
New work fronts
Central store replenishment
Equipment loss
Missing components
Damaged equipment
New QA/QC vehicles
Additional Cube Mould requirements
This creates recurring procurement opportunities.
Need Slump Cone Sets for Project Store & Equipment Control?
MTM Precision supplies Slump Cone Complete Sets consisting of:
Slump Cone – 1.5mm thickness
Base Plate – 40 × 40cm
Slump Measuring Scale / Measuring Frame
Tamping Rod – 50cm standard
Optional:
60cm Tamping Rod – Additional Charge
We support:
Site Storekeepers
Project Stores
Central Construction Stores
Equipment Controllers
Warehouse Personnel
Main Contractors
Civil Contractors
Project QA/QC Teams
Ready-Mix Companies
Testing Laboratories
Construction Procurement Departments
Customers can provide their required quantity, stock requirement, Tamping Rod length, project allocation, and applicable technical specification for quotation.
Why Choose MTM Precision?
MTM Precision supplies practical compact Concrete Testing Equipment for customers throughout Malaysia.
Our key concrete testing product categories include:
Slump Cone Complete Set
Plastic Concrete Cube Mould
Cast Iron Concrete Cube Mould
Concrete Test Hammer
For site stores and equipment controllers, the most important issue is keeping equipment complete, identifiable, available, and ready for issue.
The standard MTM Precision Slump Cone Complete Set is clearly defined as:
1.5mm Slump Cone + 40 × 40cm Base Plate + Slump Measuring Scale / Measuring Frame + 50cm Tamping Rod
with:
60cm Tamping Rod available at additional cost.
Clear inventory control allows project teams to distinguish between:
complete sets
incomplete sets
spare sets
and:
loose components
rather than relying on the number of Slump Cones alone.
The aim is for MTM Precision to support customers across goods receiving, project mobilisation, equipment issue, stock replenishment, replacement requirements, project close-out, and future construction projects.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
Website: www.mtmpre.com.my
Email: mtmpre@yahoo.com
WhatsApp: +6016-660 7346
SEO Keywords
Slump Cone Site Store Malaysia, Slump Cone Storekeeper Malaysia, Slump Cone Project Store Malaysia, Slump Cone Equipment Controller Malaysia, Slump Cone Construction Store Malaysia, Slump Cone Central Store Malaysia, Slump Cone Stock Malaysia, Slump Cone Spare Set Malaysia, Slump Cone Construction Inventory Malaysia, Slump Cone Complete Set Malaysia, Slump Cone Supplier Malaysia, Construction QA QC Equipment Store Malaysia, Concrete Testing Equipment Stock Malaysia, 1.5mm Slump Cone Malaysia, 40x40cm Base Plate Malaysia, 50cm Tamping Rod Malaysia, 60cm Tamping Rod Malaysia, Plastic Concrete Cube Mould Malaysia, Concrete Testing Equipment Supplier Malaysia.
14 Aug 2026