Slump Measuring Scale / Measuring Frame – Is It Included in a Slump Cone Complete Set?

Introduction

When purchasing a Slump Cone Complete Set in Malaysia, buyers normally pay attention to the Slump Cone and Tamping Rod.

One component that can easily be overlooked is the:

Slump Measuring Scale / Measuring Frame

At MTM Precision Sdn. Bhd., the Slump Measuring Scale / Measuring Frame is included as part of our standard Slump Cone Complete Set.

The standard package consists of:

• Slump Cone – 1.5mm thickness

• Base Plate – 40 × 40cm

• Slump Measuring Scale / Measuring Frame – Included

• Tamping Rod – 50cm standard

Customers requiring a longer Tamping Rod can select:

60cm Tamping Rod – Additional Charge

Before comparing quotations, buyers should confirm whether the Measuring Scale / Frame is actually included in the quoted package.

Is the Slump Measuring Scale Included?

Yes.

The MTM Precision standard Slump Cone Complete Set includes:

Slump Measuring Scale / Measuring Frame

This is one of the four components supplied in the standard package.

What Is Included in the Complete Set?

The standard MTM Precision configuration is:

1. SLUMP CONE

1.5mm thickness

2. BASE PLATE

40 × 40cm

3. SLUMP MEASURING SCALE / MEASURING FRAME

Included

4. TAMPING ROD

50cm standard

Optional:

60cm Tamping Rod – Additional Charge

Why Should Buyers Confirm the Measuring Scale?

Because:

Slump Cone

and:

Slump Cone Complete Set

do not necessarily describe the same purchasing package.

If a quotation says only:

Slump Cone

the buyer should not automatically assume the Measuring Scale / Frame is included.

Cone Only vs Complete Set

CONE ONLY

May contain only the Slump Cone.

COMPLETE SET

For the MTM Precision standard configuration:

1.5mm Slump Cone + 40 × 40cm Base Plate + Measuring Scale / Frame + 50cm Tamping Rod

This distinction is important when comparing prices.

Why Quotation Descriptions Matter

Consider:

SUPPLIER A

Slump Cone – RM XXX

SUPPLIER B

Slump Cone Complete Set – RM XXX

Supplier B appears more expensive.

But Supplier B may include:

• Base Plate

• Measuring Scale

• Tamping Rod

while Supplier A may quote only the cone.

Therefore:

Compare specifications before comparing prices.

Include the Measuring Scale in Your RFQ

Instead of writing:

Slump Cone Set – 2 Sets

write:

SLUMP CONE COMPLETE SET

Quantity: 2 Sets

Slump Cone – 1.5mm thickness

Base Plate – 40 × 40cm

Slump Measuring Scale / Measuring Frame – Included

Tamping Rod – 50cm

This makes the requirement much clearer.

Why Use the Words “Measuring Scale / Measuring Frame”?

Different buyers may use slightly different terminology when describing this component.

For purchasing purposes, using:

Slump Measuring Scale / Measuring Frame

helps make the intended component clear.

Procurement Should Keep the Full Description

The specification may originate from:

QA/QC

↓

Project Engineer

↓

Purchasing

↓

Supplier

The full description should remain intact throughout this process.

If:

Slump Cone Complete Set with Measuring Scale

eventually becomes only:

Slump Cone

important information has been lost.

Keep the Specification on the Purchase Order

The PO description can state:

Slump Cone Complete Set – 1.5mm Slump Cone – 40 × 40cm Base Plate – Slump Measuring Scale / Measuring Frame – 50cm Tamping Rod

This makes receiving inspection easier.

What Should the Storekeeper Check?

When receiving each complete set:

Slump Cone – ✓

Base Plate – ✓

Measuring Scale / Frame – ✓

Tamping Rod – ✓

If the Measuring Scale is missing, the set should be recorded as incomplete.

Example Receiving Inspection for 5 Sets

Order:

5 Slump Cone Complete Sets

Expected:

5 Slump Cones

5 Base Plates

5 Measuring Scales / Frames

5 Tamping Rods

The receiving team should verify all four component quantities.

Don't Count Only the Slump Cones

Suppose the store has:

8 Slump Cones

8 Base Plates

6 Measuring Scales

8 Tamping Rods

Maximum complete sets:

6

The Measuring Scale becomes the limiting component.

Why Complete-Set Counting Is Better

A stock report saying:

Slump Cone – 8 pcs

may look sufficient.

But a better report says:

Complete Sets – 6

Incomplete Sets – 2

This tells the project team what is actually available for deployment.

Example Equipment Register

SC-01

Cone – ✓

Base Plate – ✓

Measuring Scale – ✓

Tamping Rod – ✓

STATUS: COMPLETE

SC-02

Cone – ✓

Base Plate – ✓

Measuring Scale – Missing

Tamping Rod – ✓

STATUS: INCOMPLETE

This is much more useful for QA/QC and stores.

Measuring Scales Can Easily Move Between Teams

On a busy project:

Team A

borrows the Measuring Scale from:

Team B

Then Team B needs its set.

Now the project has two cones but only one immediately usable complete equipment arrangement.

Clear equipment allocation reduces this problem.

Label the Measuring Scale

Where practical, use the same identification on all four components.

For example:

SC-03

Cone – SC-03

Base Plate – SC-03

Measuring Scale – SC-03

Tamping Rod – SC-03

This makes equipment recovery easier.

Mobile QA/QC Teams Need Complete Equipment

A mobile QA/QC vehicle may carry:

1 Slump Cone

1 Base Plate

1 Measuring Scale / Frame

1 Tamping Rod

The complete set then stays with the assigned team.

Example QC Vehicle Allocation

QC VEHICLE 01

SC-01 – Complete

QC VEHICLE 02

SC-02 – Complete

QC VEHICLE 03

SC-03 – Complete

This is useful for contractors or ready-mix companies operating across multiple locations.

Slump Measuring Scale for Construction Projects

Construction companies may require complete sets for:

• Building projects

• Infrastructure works

• Civil projects

• Structural works

• Industrial developments

Each active QA/QC team may require access to complete equipment according to project needs.

Slump Measuring Scale for Ready-Mix Companies

Ready-mix concrete companies may allocate complete sets to:

• Batching plants

• Plant laboratories

• QC vehicles

• Technical teams

• Project plants

A missing Measuring Scale can make an otherwise complete-looking set incomplete.

Slump Measuring Scale for Precast Manufacturers

Precast companies may use complete sets across:

• Batching area

• Production floor

• QA/QC laboratory

• Multiple production lines

Standardising complete sets can simplify equipment management.

Slump Measuring Scale for Testing Laboratories

Material testing laboratories may maintain several sets for:

• Laboratory operations

• Mobile teams

• Customer sites

• Training

The Measuring Scale / Frame should be tracked together with the other components.

Keep All Four Components Together

For each set:

Cone

Base Plate

Measuring Scale / Frame

Tamping Rod

should remain together where practical.

This sounds obvious, but on a large construction site it can become surprisingly difficult.

End-of-Pour Equipment Check

After concrete work:

SC-01

Cone – Returned ✓

Base Plate – Returned ✓

Measuring Scale – Returned ✓

Tamping Rod – Returned ✓

Status:

Complete

This keeps the set ready for the next operation.

End-of-Site-Visit Check

For mobile testing teams, check before leaving:

Cone?

Base Plate?

Measuring Scale?

Tamping Rod?

A 20-second check can prevent a second trip back to site.

Should I Buy Another Complete Set If the Measuring Scale Is Missing?

Not automatically.

First determine whether the requirement is:

REPLACEMENT

One existing component is missing.

or:

EXPANSION

Another independent team needs an additional complete set.

These are different purchasing situations.

Spare Complete Sets Should Include the Measuring Scale

If a company keeps:

1 spare complete set

the spare should include all four components.

A spare cone without a Measuring Scale / Frame is not a fully complete spare set.

Example Spare Inventory

SPARE-SC01

Cone – ✓

Base Plate – ✓

Measuring Scale – ✓

Tamping Rod – ✓

READY

SPARE-SC02

Cone – ✓

Base Plate – ✓

Measuring Scale – Missing

Tamping Rod – ✓

NOT COMPLETE

This gives the storekeeper a clear picture.

How Many Measuring Scales Are Needed for 10 Complete Sets?

If purchasing:

10 Slump Cone Complete Sets

the standard package should contain:

10 Measuring Scales / Frames

along with:

10 Slump Cones

10 Base Plates

10 Tamping Rods

Example Bulk RFQ

PRODUCT

Slump Cone Complete Set

QUANTITY

10 Sets

EACH SET TO INCLUDE

1 × Slump Cone – 1.5mm thickness

1 × Base Plate – 40 × 40cm

1 × Slump Measuring Scale / Measuring Frame

1 × Tamping Rod – 50cm

This leaves little room for misunderstanding.

Can I Order a 60cm Rod With the Measuring Scale Included?

Yes.

Where the customer requires the optional longer rod, the configuration can be written as:

1.5mm Slump Cone

40 × 40cm Base Plate

Slump Measuring Scale / Measuring Frame

60cm Tamping Rod

The 60cm rod is available at additional cost.

Example Mixed Rod Order

ITEM 1

Complete Set with 50cm Tamping Rod – 8 Sets

ITEM 2

Complete Set with 60cm Tamping Rod – 2 Sets

Both configurations include the Measuring Scale / Frame.

What Other Concrete Testing Equipment Can Be Purchased Together?

Customers may also require:

• Plastic Concrete Cube Mould

• Cast Iron Concrete Cube Mould

• Concrete Test Hammer

These can be included in the same concrete testing equipment enquiry.

Example New QA/QC Equipment Package

ITEM 1

Slump Cone Complete Set – Required Quantity

ITEM 2

Plastic Concrete Cube Mould – Required Quantity

ITEM 3

Cast Iron Concrete Cube Mould – Required Quantity

ITEM 4

Concrete Test Hammer – Required Quantity

This gives a new project or laboratory a broader equipment list.

Frequently Asked Questions

Is the Slump Measuring Scale included in the MTM Precision complete set?

Yes.

The:

Slump Measuring Scale / Measuring Frame

is included in the standard package.

What else is included?

The standard set includes:

1.5mm Slump Cone

40 × 40cm Base Plate

Slump Measuring Scale / Measuring Frame

50cm Tamping Rod

Is the Base Plate included?

Yes.

The standard package includes a:

40 × 40cm Base Plate.

What Tamping Rod length is standard?

The standard Tamping Rod is:

50cm.

Is 60cm available?

Yes.

The:

60cm Tamping Rod

is available at additional cost.

Should I mention the Measuring Scale in my RFQ?

Yes.

Including all components makes the quotation requirement clearer.

How many Measuring Scales should I receive with 5 complete sets?

For five complete sets:

5 Measuring Scales / Frames

should be included as part of the standard configuration.

Where can I buy a Slump Cone Set with Measuring Scale in Malaysia?

Customers can contact MTM Precision Sdn. Bhd. in Puchong, Selangor for Slump Cone Complete Set enquiries.

Looking for a Slump Cone Set With Measuring Scale in Malaysia?

MTM Precision's standard Slump Cone Complete Set consists of:

• Slump Cone – 1.5mm thickness

• Base Plate – 40 × 40cm

• Slump Measuring Scale / Measuring Frame – Included

• Tamping Rod – 50cm standard

Optional:

• 60cm Tamping Rod – Additional Charge

When requesting quotation, provide:

quantity + required Tamping Rod length + delivery location + applicable technical requirements.

Why Choose MTM Precision?

MTM Precision supplies practical compact Concrete Testing Equipment for customers throughout Malaysia.

Our key concrete testing product categories include:

• Slump Cone Complete Set

• Plastic Concrete Cube Mould

• Cast Iron Concrete Cube Mould

• Concrete Test Hammer

For customers purchasing a Slump Cone Complete Set, the Measuring Scale / Frame should be included in the quotation comparison and equipment inventory.

The MTM Precision standard configuration is clearly defined as:

1.5mm Slump Cone + 40 × 40cm Base Plate + Slump Measuring Scale / Measuring Frame + 50cm Tamping Rod

with:

60cm Tamping Rod available at additional cost.

This clear configuration helps contractors, QA/QC teams, laboratories, ready-mix companies, precast manufacturers, stores, and procurement departments understand exactly what they are requesting and receiving.

Contact MTM Precision

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia

Website: www.mtmpre.com.my
Email: mtmpre@yahoo.com
WhatsApp: +6016-660 7346

SEO Keywords

Slump Measuring Scale Malaysia, Slump Measuring Frame Malaysia, Slump Cone Measuring Scale Malaysia, Slump Cone Measuring Frame Malaysia, Slump Cone Complete Set Malaysia, Slump Cone With Measuring Scale Malaysia, Slump Cone Supplier Malaysia, Slump Cone Puchong, Slump Cone Selangor, 1.5mm Slump Cone Malaysia, 40x40cm Base Plate Malaysia, 50cm Tamping Rod Malaysia, 60cm Tamping Rod Malaysia, Concrete Slump Test Equipment Malaysia, Concrete Testing Equipment Supplier Malaysia, Plastic Concrete Cube Mould Malaysia, Cast Iron Concrete Cube Mould Malaysia, Concrete Test Hammer Malaysia.