Slump Cone, Cube Mould & Concrete Test Hammer – What Should a New Construction Site Buy?
Slump Cone, Cube Mould & Concrete Test Hammer – What Should a New Construction Site Buy?
Introduction
When a new construction project starts, the QA/QC team may need more than just a:
Slump Cone Complete Set
A basic concrete testing equipment setup may also include:
-
Plastic Concrete Cube Moulds
-
Cast Iron Concrete Cube Moulds
-
Concrete Test Hammer
-
Other applicable testing equipment
The exact requirement depends on the project specification, QA/QC procedures, testing programme, and project responsibilities.
For many buyers, the key question is:
What concrete testing equipment should we prepare when starting a new site?
At MTM Precision Sdn. Bhd., our standard Slump Cone Complete Set consists of:
-
Slump Cone – 1.5mm thickness
-
Base Plate – 40 × 40cm
-
Slump Measuring Scale / Measuring Frame
-
Tamping Rod – 50cm standard
Optional:
60cm Tamping Rod – Additional Charge
Customers can also enquire about:
-
Plastic Concrete Cube Mould
-
Cast Iron Concrete Cube Mould
-
Concrete Test Hammer
This allows several related concrete testing equipment requirements to be reviewed together.
Start With the Project QA/QC Requirement
Before purchasing equipment, the project team should first identify:
-
What concrete works will be carried out?
-
How many work fronts will be active?
-
Who is responsible for testing?
-
Is there a project laboratory?
-
Will QA/QC personnel move between locations?
-
What equipment is already available?
This helps prevent both:
under-purchasing
and:
unnecessary duplication.
Basic Concrete Testing Equipment Categories
A new site may review the following product categories:
SLUMP CONE COMPLETE SET
For applicable fresh concrete testing activities.
PLASTIC CONCRETE CUBE MOULD
For applicable concrete specimen preparation.
CAST IRON CONCRETE CUBE MOULD
For applicable laboratory or project requirements.
CONCRETE TEST HAMMER
For applicable concrete assessment activities.
The actual list should follow project requirements.
What Is Included in the MTM Precision Slump Cone Complete Set?
The standard package contains four items.
1. SLUMP CONE
1.5mm thickness
2. BASE PLATE
40 × 40cm
3. SLUMP MEASURING SCALE / MEASURING FRAME
Included
4. TAMPING ROD
50cm standard
Optional:
60cm Tamping Rod – Additional Charge
This gives project teams a clearly defined starting configuration.
Why Buy a Complete Set Instead of Only a Cone?
If the project requires the full package, purchasing only:
Slump Cone
may leave the site missing other components.
A clearly defined complete set helps procurement understand exactly what should arrive.
Example Slump Cone RFQ
PRODUCT
Slump Cone Complete Set
QUANTITY
2 Sets
SPECIFICATION
Slump Cone – 1.5mm thickness
Base Plate – 40 × 40cm
Slump Measuring Scale / Measuring Frame – Included
Tamping Rod – 50cm
APPLICATION
New Construction Project QA/QC
This provides a clear quotation basis.
How Many Slump Cone Sets Should a New Site Buy?
There is no universal number.
A small project may require:
1 Set
A larger project may allocate equipment to:
STRUCTURAL TEAM
1 Set
CIVIL TEAM
1 Set
PROJECT LAB
1 Set
SPARE
1 Set
Possible total:
4 Sets
The actual quantity should follow the number of independent work fronts and project requirements.
Plastic Concrete Cube Moulds Are a Related Requirement
A new project may also require:
Plastic Concrete Cube Moulds
depending on the applicable concrete testing programme.
Plastic moulds can be practical for site operations because they are:
-
Lightweight
-
Corrosion resistant
-
Easier to transport
-
Convenient for mobile QA/QC teams
Cube Mould Quantity Is Not the Same as Slump Cone Quantity
This is important.
If the project buys:
2 Slump Cone Complete Sets
it does not mean it should buy:
2 Cube Moulds
The quantity of Cube Moulds may be much higher.
Why Cube Mould Quantity Can Be Higher
Cube Moulds may remain occupied by specimens for a period.
Therefore, the site may need enough moulds to support:
multiple pours
and:
multiple specimen groups
while previously used moulds are still in circulation.
Example
The site owns:
2 Slump Cone Complete Sets
but requires:
18 Plastic Concrete Cube Moulds
or another quantity according to its testing programme.
This is entirely possible.
Do Not Use a 1:1 Quantity Rule
Avoid assumptions such as:
1 Slump Cone Set = 1 Cube Mould
These products have different usage patterns.
Calculate each quantity separately.
Plastic Cube Moulds for Mobile QA/QC Teams
A mobile QA/QC vehicle may carry:
ITEM 1
Slump Cone Complete Set
ITEM 2
Plastic Concrete Cube Moulds
ITEM 3
Other applicable testing equipment
This creates a portable concrete testing package.
Cast Iron Concrete Cube Moulds
Where appropriate, a fixed project laboratory may also require:
Cast Iron Concrete Cube Moulds
These can be considered according to:
-
Project specification
-
Laboratory requirements
-
Internal QA/QC procedures
Plastic vs Cast Iron Cube Moulds
A project may choose different mould types for different operating environments.
For example:
MOBILE SITE TEAM
Plastic Concrete Cube Moulds
FIXED PROJECT LAB
Cast Iron Concrete Cube Moulds
The actual selection should follow applicable technical requirements.
Concrete Test Hammer Is Another Related Product
A new project may also require a:
Concrete Test Hammer
for applicable concrete assessment activities.
This can become part of the project's broader concrete testing equipment inventory.
Concrete Test Hammer Is Not a Replacement for Slump Cone Equipment
These products serve different purposes.
A project may therefore require both:
Slump Cone Complete Set
and:
Concrete Test Hammer
depending on the applicable work scope.
Example Basic New Site Equipment Package
ITEM 1
Slump Cone Complete Set – 2 Sets
ITEM 2
Plastic Concrete Cube Mould – Required Quantity
ITEM 3
Concrete Test Hammer – 1 Unit
This can form a compact initial QA/QC purchasing list.
Example Project Laboratory Package
ITEM 1
Slump Cone Complete Set – 1 Set
ITEM 2
Plastic Concrete Cube Mould – Required Quantity
ITEM 3
Cast Iron Concrete Cube Mould – Required Quantity
ITEM 4
Concrete Test Hammer – Required Quantity
This gives a fixed laboratory a broader equipment starting point.
New High-Rise Project Example
A high-rise project may require equipment across:
-
Tower A
-
Tower B
-
Podium
-
External civil works
-
Project laboratory
A possible equipment review could be:
SLUMP CONE COMPLETE SET
Required Quantity by work front
PLASTIC CUBE MOULDS
Required Quantity according to testing programme
CAST IRON CUBE MOULDS
If required for fixed laboratory
CONCRETE TEST HAMMER
If required
New Factory Project Example
An industrial project may involve:
-
Foundations
-
Columns
-
Slabs
-
Machine bases
-
External concrete works
The QA/QC team can review all related concrete testing equipment before the first major concrete activities begin.
New Warehouse Project Example
Warehouse projects may involve:
-
Structural foundations
-
Ground slabs
-
Loading bays
-
External hardstanding
-
Drainage
A dedicated flooring or structural team may require its own Slump Cone Set.
New Infrastructure Project Example
Infrastructure projects can involve:
-
Roads
-
Drainage
-
Culverts
-
Bridges
-
Retaining walls
-
Utility structures
Because work fronts can be far apart, equipment allocation can follow each active zone.
New Ready-Mix Batching Plant Example
A new batching plant may review equipment for:
PLANT LAB
Slump Cone Complete Set
QC VEHICLE
Slump Cone Complete Set
CUBE MOULDS
Required Quantity
SPARE EQUIPMENT
As Required
This creates an operational rather than project-only equipment setup.
New Precast Factory Example
A new precast facility may require equipment for:
-
Batching area
-
Production line
-
QA/QC laboratory
-
Spare stock
Concrete testing equipment should be included before production begins.
Prepare the Equipment List Before the First Pour
Waiting until the first concrete truck arrives is not a good purchasing strategy.
A better sequence is:
Review project requirements
↓
Prepare equipment list
↓
Request quotation
↓
Purchase
↓
Receive and inspect
↓
Allocate to site teams
↓
Begin concrete operations
This reduces unnecessary urgency.
Project Mobilisation Checklist
A simple mobilisation checklist can include:
SLUMP CONE SETS
Quantity confirmed – ✓
CUBE MOULDS
Quantity confirmed – ✓
CONCRETE TEST HAMMER
Requirement confirmed – ✓
PROJECT LAB EQUIPMENT
Reviewed – ✓
SPARE EQUIPMENT
Reviewed – ✓
This provides a practical starting point.
Don't Forget Existing Company Stock
Before buying everything new, ask:
Does the company already own usable equipment?
A central store may already have:
-
Complete Slump Cone Sets
-
Cube Moulds
-
Concrete Test Hammer
These may be transferable to the new project.
But Check Whether the Existing Sets Are Actually Complete
The central store may report:
5 Slump Cone Sets
but physical inspection reveals:
5 Cones
4 Base Plates
3 Measuring Scales
5 Tamping Rods
Actual complete sets:
3
This is why physical inventory matters.
Equipment Transfer Can Reduce New Purchases
If a previous project has finished, reusable equipment may be:
recovered
↓
cleaned
↓
inspected
↓
reallocated
This can reduce the initial procurement requirement for the new project.
However, Project Overlap Can Increase Demand
If:
Project A is still active
and:
Project B starts
the same equipment cannot necessarily be transferred.
Additional sets may therefore be required.
New Project Does Not Always Mean All-New Equipment
A better approach is:
Project requirement
minus:
available transferable equipment
equals:
new purchasing requirement
This gives procurement a more accurate quantity.
Example
New site requires:
5 Slump Cone Complete Sets
Central store can provide:
2 Complete Sets
Additional quantity to review:
3 Sets
This is better than automatically purchasing five.
Check Spare Requirements Separately
The project may require:
4 operational sets
plus:
1 spare
Total target:
5 Sets
Keeping spare quantity separate makes the planning logic clearer.
What Should Be Included in the Purchase Request?
A strong Slump Cone purchase request should include:
PRODUCT
Slump Cone Complete Set
QUANTITY
Required Quantity
SLUMP CONE
1.5mm thickness
BASE PLATE
40 × 40cm
MEASURING SCALE / FRAME
Included
TAMPING ROD
50cm standard or 60cm optional
DELIVERY
Project location
This gives procurement and suppliers a clear requirement.
Example Complete New Site RFQ
ITEM 1
Slump Cone Complete Set – 4 Sets
Specification:
1.5mm Slump Cone
40 × 40cm Base Plate
Slump Measuring Scale / Measuring Frame
50cm Tamping Rod
ITEM 2
Plastic Concrete Cube Mould – Required Quantity
ITEM 3
Concrete Test Hammer – 1 Unit
APPLICATION
New Construction Site QA/QC
This creates a clearer consolidated enquiry.
Example RFQ With Both Cube Mould Types
ITEM 1
Slump Cone Complete Set – Required Quantity
ITEM 2
Plastic Concrete Cube Mould – Required Quantity
ITEM 3
Cast Iron Concrete Cube Mould – Required Quantity
ITEM 4
Concrete Test Hammer – Required Quantity
APPLICATION
Project Laboratory & Mobile QA/QC
This allows equipment to be divided between site and laboratory operations.
Should You Buy Everything From One Supplier?
Consolidating related products can make procurement easier where the required products and specifications are available from the same supplier.
Potential advantages include:
-
Fewer RFQs
-
Easier communication
-
Simpler delivery coordination
-
More consistent equipment records
The buyer should still confirm each product specification separately.
One Supplier Does Not Mean One Quantity
Even when products are purchased together:
Slump Cone quantity
Cube Mould quantity
and:
Concrete Test Hammer quantity
should each be calculated independently.
Do Not Buy Based Only on a Generic “Concrete Testing Kit”
A generic description can hide important differences.
Ask what is actually included.
For example:
Slump Cone Complete Set
should be clearly defined.
Likewise:
Cube Moulds
should have their applicable specification and quantity confirmed.
What Should the Store Check Upon Delivery?
For the Slump Cone Complete Set:
Cone – ✓
Base Plate – ✓
Measuring Scale / Frame – ✓
Tamping Rod – ✓
Correct rod length – ✓
For other equipment:
Correct product
Correct quantity
Applicable specification
should also be checked.
Label Equipment Before Issuing It
For example:
SC-01
Tower A
SC-02
Tower B
SC-03
Civil Team
SC-04
Project Lab
This helps equipment control from the beginning of the project.
Cube Moulds Can Also Be Numbered
For larger projects, Cube Moulds may also be identified according to the company's internal system.
This helps:
-
Inventory control
-
Equipment return
-
Missing-item tracking
Start Equipment Control From Day One
It is much easier to maintain a clean equipment register from project mobilisation than to rebuild one after equipment has already been distributed across the site.
Frequently Asked Questions
What concrete testing equipment should a new construction site buy?
The requirement depends on the project, but common categories may include:
-
Slump Cone Complete Set
-
Plastic Concrete Cube Mould
-
Cast Iron Concrete Cube Mould
-
Concrete Test Hammer
The actual requirement should follow applicable project and technical procedures.
What is included in the MTM Precision Slump Cone Complete Set?
The standard package consists of:
1.5mm Slump Cone + 40 × 40cm Base Plate + Slump Measuring Scale / Measuring Frame + 50cm Tamping Rod.
Is a 60cm Tamping Rod available?
Yes.
The:
60cm Tamping Rod
is available at additional cost.
How many Slump Cone Sets should a new site buy?
The quantity depends on the number of active concrete work fronts, QA/QC teams, laboratory requirements, existing equipment, and spare strategy.
How many Cube Moulds should I buy?
Cube Mould quantity should be determined separately according to the applicable testing programme.
Do not assume it should match the Slump Cone quantity.
Should I buy Plastic or Cast Iron Cube Moulds?
The appropriate mould type should follow the applicable technical and operational requirements.
A project may also use different types for mobile and fixed laboratory operations.
Can I buy a Concrete Test Hammer together with Slump Cone equipment?
Yes.
Concrete Test Hammer is another related product category available from MTM Precision.
Should I check company stock before buying new equipment?
Yes.
Existing usable equipment may reduce the quantity that needs to be purchased for a new project.
Where can I buy concrete testing equipment in Malaysia?
Customers can contact MTM Precision Sdn. Bhd. in Puchong, Selangor regarding Slump Cone Complete Sets, Concrete Cube Moulds, Concrete Test Hammer, and related enquiries.
Setting Up a New Construction Site?
Start by reviewing:
Slump Cone Complete Sets
Concrete Cube Moulds
Concrete Test Hammer
and:
other applicable QA/QC equipment
before the first major concrete operations begin.
The MTM Precision standard Slump Cone Complete Set consists of:
-
Slump Cone – 1.5mm thickness
-
Base Plate – 40 × 40cm
-
Slump Measuring Scale / Measuring Frame
-
Tamping Rod – 50cm standard
Optional:
-
60cm Tamping Rod – Additional Charge
For quotation, provide the required quantity, delivery location, and applicable project requirements.
Why Choose MTM Precision?
MTM Precision supplies practical compact Concrete Testing Equipment for customers throughout Malaysia.
Our key concrete testing product categories include:
-
Slump Cone Complete Set
-
Plastic Concrete Cube Mould
-
Cast Iron Concrete Cube Mould
-
Concrete Test Hammer
For a new construction site, buying equipment product by product only after each shortage appears can create unnecessary urgent purchasing.
A more efficient approach is to review the broader QA/QC requirement during project mobilisation.
The MTM Precision standard Slump Cone Complete Set is clearly defined as:
1.5mm Slump Cone + 40 × 40cm Base Plate + Slump Measuring Scale / Measuring Frame + 50cm Tamping Rod
with:
60cm Tamping Rod available at additional cost.
This gives contractors, QA/QC teams, project managers, site laboratories, ready-mix companies, precast manufacturers, and procurement departments a clear starting point for concrete testing equipment planning.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
Website: www.mtmpre.com.my
Email: mtmpre@yahoo.com
WhatsApp: +6016-660 7346
SEO Keywords
Concrete Testing Equipment for New Construction Site Malaysia, New Site QA QC Equipment Malaysia, Slump Cone and Cube Mould Malaysia, Slump Cone Complete Set Malaysia, Concrete Cube Mould Malaysia, Concrete Test Hammer Malaysia, Concrete Testing Equipment Supplier Malaysia, Construction Site Testing Equipment Malaysia, Project QA QC Equipment Malaysia, Buy Concrete Testing Equipment Malaysia, Slump Cone Supplier Malaysia, 1.5mm Slump Cone Malaysia, 40x40cm Base Plate Malaysia, Slump Measuring Scale Malaysia, 50cm Tamping Rod Malaysia, 60cm Tamping Rod Malaysia, Plastic Concrete Cube Mould Malaysia, Cast Iron Concrete Cube Mould Malaysia.
14 Aug 2026