How to Measure EMF Around Electrical Equipment with Tenmars TM-191A Malaysia
How to Measure EMF Around Electrical Equipment with Tenmars TM-191A Malaysia
Electrical equipment, wiring, motors, transformers and power systems can generate electromagnetic fields during operation. For technicians and facility personnel, measuring these fields can help identify sources and compare EMF levels at different locations.
The Tenmars TM-191A EMF Meter is a portable instrument suitable for general low-frequency electromagnetic field measurements around electrical equipment.
Why Measure EMF Around Electrical Equipment?
An EMF survey can help users understand where electromagnetic fields are present and how readings change according to distance and equipment operating conditions.
Typical applications include:
Electrical panels
Distribution boards
Motors
Transformers
Electrical cabinets
Production machinery
Office electrical equipment
Building electrical systems
Household electrical appliances
The objective is normally not simply to obtain one reading, but to build a clearer picture of the electromagnetic environment around the equipment.
Step 1: Identify the Equipment
Before taking measurements, determine what equipment you want to investigate.
Ask:
What type of equipment is operating?
Is it powered by mains electricity?
Where are the power cables located?
Are there motors or transformers inside?
Where do people normally stand or work?
This helps determine suitable measurement points.
Step 2: Establish a Reference Measurement
Start by taking a measurement away from the suspected EMF source.
This provides a reference reading that can later be compared with measurements closer to the equipment.
Avoid relying on only one measurement point.
Step 3: Move Toward the EMF Source
Take measurements at several locations around the equipment.
For example, readings can be taken:
Close to the equipment
At the normal operator position
At intermediate distances
Further away from the equipment
Comparing these readings can help identify how the measured field changes with distance.
Step 4: Check Different Sides of the Equipment
Electromagnetic fields may not be distributed equally around a machine or electrical installation.
Therefore, measurements can be taken at the:
Front
Rear
Left side
Right side
Operator position
Nearby occupied areas
This is particularly useful when checking larger industrial equipment.
Step 5: Compare Operating Conditions
Where appropriate and safe, measurements can also be compared under different operating conditions.
For example:
Equipment OFF → Equipment ON
or
Low load → Normal operating load
A significant change in the reading may help identify whether the equipment is contributing to the electromagnetic field detected at that location.
Never interfere with live electrical systems merely to perform an EMF measurement. Follow the site's electrical and workplace safety procedures.
Step 6: Record the Measurement Location
For professional surveys, recording only the EMF value may not provide enough information.
Consider documenting:
Equipment name
Measurement location
Distance from equipment
Operating condition
Measurement value
Date and time
This makes future comparisons more meaningful.
Distance Matters in EMF Measurement
One of the most useful ways to investigate an electromagnetic field source is to compare readings at different distances.
For example:
10 cm → 30 cm → 50 cm → 1 metre
The exact measurement points should depend on the application and site conditions.
This approach can provide much more useful information than taking a single reading directly beside the equipment.
Where Is the TM-191A Useful?
The Tenmars TM-191A can be considered for general EMF checking in:
Factories
Workshops
Commercial buildings
Offices
Electrical rooms
Laboratories
Residential properties
Maintenance departments
It is particularly useful when portability and straightforward field measurements are required.
Is TM-191A Suitable for Wi-Fi and 5G Testing?
Users should distinguish between low-frequency electromagnetic field measurement and radio-frequency (RF) measurement.
If the primary source is Wi-Fi, mobile communications, antennas or other RF equipment, an RF-capable meter designed for the relevant frequency range may be required.
Do not choose an EMF meter based only on the term "EMF".
The correct instrument depends on the source and frequency you intend to measure.
Choosing the Correct EMF Meter in Malaysia
Before purchasing an EMF meter, tell your supplier exactly what you intend to test.
For example:
"I need to measure EMF around an electrical transformer."
is much more useful than:
"I need an EMF meter."
Different EMF meters are designed for different applications.
MTM Precision can help Malaysian customers identify a suitable instrument based on the actual measurement requirement.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026