Where Should You Check for Electromagnetic Fields in Homes and Workplaces? Malaysia
Where Should You Check for Electromagnetic Fields in Homes and Workplaces? Malaysia
Electromagnetic fields can be present around electrical equipment, wiring, appliances and power systems. However, when conducting an EMF survey, many users are unsure where they should actually take measurements.
Using a portable EMF meter such as the Tenmars TM-191A, users can check selected locations and compare readings to better understand the electromagnetic environment.
Start with Electrical Sources
A practical EMF survey normally begins by identifying electrical equipment and installations.
Possible sources include:
Electrical panels
Distribution boards
Electrical wiring
Transformers
Electric motors
Household appliances
Office equipment
Industrial machinery
Power supplies
Building electrical systems
Instead of randomly walking around with the meter, identify potential sources first and establish measurement points.
Where to Check EMF at Home
Modern homes contain many electrically powered devices.
Possible measurement locations include:
Near major electrical appliances
Around electrical distribution boards
Near power adapters and chargers
Home office workstations
Areas close to electrical equipment
Frequently occupied areas
It can also be useful to measure at the location where people normally sit, work or spend longer periods of time.
Where to Check EMF in an Office
Office environments may contain computers, monitors, power supplies, electrical wiring and other equipment.
Possible measurement points include:
Employee workstations
Equipment rooms
Electrical rooms
Areas near distribution panels
Printer and equipment areas
Meeting rooms
Frequently occupied spaces
The objective is to compare readings rather than assume that every electrical device produces the same field level.
Where to Check EMF in a Factory
Industrial environments may contain larger electrical systems.
Potential measurement areas include:
Electric motors
Transformers
Production machinery
Electrical control cabinets
Distribution boards
Power equipment
Operator stations
Maintenance areas
For machinery, take readings at the normal operator position as well as closer to the suspected source.
Check at Different Distances
Distance is an important part of EMF measurement.
Instead of recording only the reading immediately beside the source, consider taking measurements at several distances.
For example:
10 cm → 30 cm → 50 cm → 1 metre
The exact distances should be selected according to the equipment, environment and purpose of the survey.
This can show how the measured field changes as you move away from the source.
Check the Normal Working Position
For workplace measurements, one particularly useful location is the position where the employee normally works.
For example, if an operator stands approximately one metre from a machine, the reading at that position may provide more practical information than a measurement taken directly against the machine enclosure.
Record both the reading and the measurement location.
Create a Simple EMF Survey Map
For larger buildings, divide the area into measurement points.
For example:
Point A: Electrical panel
Point B: Workstation
Point C: Production machine
Point D: Operator position
Point E: Middle of room
Point F: Adjacent room
Record the measurement at each point.
Repeating the same measurement method later can also help identify changes in the electromagnetic environment.
What Should You Record?
For a more useful EMF survey, record:
Measurement point
Equipment or suspected source
Distance from source
Equipment operating condition
EMF reading
Date and time
A simple table or site sketch can make the results easier to understand.
Can You Use TM-191A for Every EMF Source?
No single EMF meter should automatically be assumed suitable for every electromagnetic source.
The Tenmars TM-191A is intended for specific electromagnetic field measurement applications.
If the target is Wi-Fi, mobile communications, RF transmitters, antennas or other wireless sources, verify whether an RF meter with the appropriate frequency coverage is required.
Always match the instrument to the source being measured.
EMF Testing for Malaysian Workplaces
EMF measurement can be relevant to:
Manufacturing facilities
Commercial buildings
Electrical maintenance
Engineering inspections
Facility management
Laboratories
Educational institutions
General environmental investigations
The Tenmars TM-191A provides a portable option for users who need to perform applicable electromagnetic field checks at multiple locations.
Looking for Tenmars TM-191A in Malaysia?
MTM Precision supplies professional testing and measurement instruments for Malaysian industrial, electrical and environmental applications.
If you are unsure which EMF meter is suitable, send us the equipment or source you intend to measure.
Our team can help you determine whether the Tenmars TM-191A or another EMF measurement instrument better matches your application.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026