How to Measure Steel Hardness On-Site with Linshang LS251D Malaysia
How to Measure Steel Hardness On-Site with Linshang LS251D Malaysia
Steel hardness testing does not always have to be performed in a laboratory. For large machinery parts, fabricated steel components, shafts, gears and other heavy workpieces, moving the component to a bench hardness tester may be difficult or impractical.
The Linshang LS251D Leeb Hardness Tester provides a portable method for checking the hardness of suitable steel components directly at the workshop, factory or inspection site.
Where Is On-Site Steel Hardness Testing Useful?
Portable hardness testing can be useful for:
Steel fabrication workshops
Machine shops
Manufacturing plants
Maintenance departments
Heavy machinery inspection
Incoming material inspection
Quality control
Repair and overhaul work
Large shafts and gears
Moulds and dies
The main advantage is simple: bring the hardness tester to the workpiece instead of bringing the workpiece to the laboratory.
Step 1: Check Whether the Workpiece Is Suitable
Before testing, confirm that the steel component is suitable for Leeb hardness measurement.
Important factors include:
Workpiece weight
Material thickness
Surface condition
Surface curvature
Stability during testing
Test location
Large and heavy steel components are generally more suitable for Leeb hardness testing than very small or lightweight parts.
If the component is too light or thin, proper coupling to a rigid support may be required.
Step 2: Prepare the Test Surface
Surface preparation is extremely important.
The measurement area should be clean and reasonably smooth. Remove conditions that may interfere with the impact measurement, such as:
Loose rust
Heavy oxide scale
Dirt
Rough grinding marks
Unsuitable coatings
Surface contamination
Poor surface preparation is one of the common causes of inconsistent hardness readings.
Step 3: Select the Correct Material
Select the appropriate material setting on the LS251D.
Hardness conversion depends on the material being tested. Using an incorrect material setting can result in misleading converted hardness values.
The LS251D can be used with various supported metallic materials, including steel, cast steel, stainless steel, cast iron, aluminium alloys, copper alloys and other applicable materials.
Step 4: Select the Required Hardness Scale
Depending on the application, users can select hardness scales such as:
HL, HRC, HRB, HRA, HB, HV or HS.
For example, HRC is commonly encountered when checking hardened steel components, while HB may be more relevant for certain softer steels and cast materials.
Always follow the hardness scale specified by the engineering drawing, inspection procedure or customer requirement.
Step 5: Position the Impact Device
Place the D-type impact device firmly against the prepared test surface.
The probe should remain stable during measurement.
The LS251D digital impact device can detect the impact direction and provide automatic direction compensation, making it more convenient when measurements need to be taken from different orientations.
Step 6: Take Multiple Measurements
Do not judge an entire component from one single impact.
Take several measurements around the selected inspection area.
Multiple readings help identify:
Abnormal readings
Surface preparation problems
Local hardness variations
Incorrect probe positioning
Measurement inconsistency
If one result is significantly different from the others, inspect the surface and measurement position before repeating the test.
Step 7: Evaluate the Results
Compare the measured hardness against the relevant:
Engineering specification
Material requirement
Manufacturing specification
Maintenance limit
Customer requirement
Applicable testing procedure
A hardness value by itself does not automatically determine whether a component passes or fails.
The result must be evaluated against the correct acceptance criteria.
Common Mistakes During On-Site Testing
Several mistakes can affect Leeb hardness measurements:
Testing a workpiece that is too light
The impact can cause movement or vibration.
Testing thin material without proper support
The material may flex during impact.
Testing a rough surface
Surface roughness can produce unstable readings.
Selecting the wrong material
Converted hardness values may become inaccurate.
Taking only one measurement
A single reading may not represent the actual condition.
Testing too close to an edge
Edge effects may influence the measurement.
Why LS251D Is Useful for Field Inspection
For many industrial users, portability is the biggest advantage of the Linshang LS251D.
A technician can carry the instrument to the machine, component or inspection location and perform hardness measurements without moving heavy equipment.
This can be particularly useful during:
Factory maintenance
Machinery overhaul
Incoming inspection
Production QC
Field service
Equipment repair
Steel component inspection
Portable Steel Hardness Testing in Malaysia
For Malaysian engineering companies, factories and maintenance teams dealing with large steel components, the Linshang LS251D Leeb Hardness Tester offers a convenient solution for on-site hardness inspection.
However, reliable Leeb hardness testing depends not only on the instrument but also on correct workpiece selection, surface preparation, material settings and measurement technique.
Choosing the correct testing method for the application remains essential.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
15 Aug 2026