How to Test Water Before and After Filtration with Linshang LS310 Malaysia
How to Test Water Before and After Filtration with Linshang LS310 Malaysia
How do you know whether a water filtration system is changing the water quality?
One common method is to measure TDS before and after filtration. However, TDS represents only one water quality parameter.
For users who require broader screening, the Linshang LS310 Water Quality Tester can measure six parameters:
COD
TOC
TDS
UV275
EC
Temperature
This makes the LS310 useful for comparing water conditions before and after filtration in homes, offices, commercial buildings and water treatment applications in Malaysia.
Why Test Water Before and After Filtration?
A water filter is designed to change certain characteristics of the incoming water.
Testing only the filtered water gives limited information.
A better approach is to compare two samples:
Sample A – Water before filtration
Sample B – Water after filtration
The difference between the two measurements can provide useful information about changes after treatment.
This approach is particularly useful for routine monitoring and comparative testing.
Why Is TDS Commonly Used?
TDS meters are widely used because they are:
Affordable
Portable
Fast
Easy to operate
For RO systems, TDS measurements can be especially useful for observing changes in dissolved solids.
However, TDS alone should not be interpreted as a complete water quality assessment.
A water sample can contain other characteristics that are not represented by a single TDS reading.
Why Use the Linshang LS310?
The LS310 expands water testing beyond TDS.
It measures:
COD + TOC + TDS + UV275 + EC + Temperature
Instead of receiving only one number, users can compare multiple indicators before and after filtration.
This can be valuable for professional water treatment and filtration applications.
How to Compare Water Before and After Filtration
A practical comparison can be performed using the following approach.
Step 1 – Collect the Incoming Water Sample
Take a sample from the water source before it enters the filtration system.
This establishes the baseline condition.
Step 2 – Collect the Filtered Water Sample
Take another sample from the outlet after filtration.
Whenever possible, collect both samples under similar operating conditions.
Step 3 – Measure the Samples
Use the LS310 to evaluate the relevant parameters.
Record the results for both samples.
Step 4 – Compare the Readings
Compare:
COD
TOC
TDS
UV275
EC
Temperature
The objective is to observe how the measured water characteristics change after treatment.
Step 5 – Keep Historical Records
A single comparison provides information about the current condition.
Repeated testing can be even more useful.
By keeping measurement records, users can observe changes over time and establish normal operating trends.
Using LS310 for RO Water Testing
Reverse osmosis systems are frequently evaluated by comparing TDS values between feed water and product water.
The LS310 can still provide TDS information while adding other parameters.
A typical comparison may involve:
Feed Water → RO System → Product Water
Users can record measurements at each stage and compare the results.
For technical users, this provides more information than a TDS-only approach.
Can LS310 Determine Filter Efficiency?
This depends on what is meant by "efficiency."
Different filters are designed to remove or reduce different substances.
Therefore, one instrument or one parameter cannot necessarily determine the complete performance of every filtration system.
For example:
Sediment filters have a different purpose from RO membranes.
Activated carbon filters target different substances from ion-exchange systems.
UV sterilization addresses a different issue from dissolved solids.
The LS310 should therefore be used as a multi-parameter screening and comparison instrument, not as universal proof that every contaminant has been removed.
Useful for Water Filter Maintenance
Water quality measurements can also support maintenance decisions.
If a system has established normal readings, technicians can periodically compare new measurements with the baseline.
Unexpected changes may indicate that further investigation is required.
Possible causes could include:
Filter condition
RO membrane performance
Changes in incoming water
System maintenance issues
Operating condition changes
The measurement does not automatically identify the cause, but it can indicate when additional inspection may be worthwhile.
Useful for Water Filtration Companies
For water filtration suppliers and service companies in Malaysia, portable testing equipment can support customer demonstrations.
A technician can measure:
Before Filtration
and then:
After Filtration
This provides customers with actual comparative readings.
The LS310 offers more measurement information than demonstrating filtration performance with TDS alone.
Useful for Facility Management
Commercial buildings may contain multiple water treatment components, including:
Storage tanks
Filters
RO systems
Water dispensers
Drinking water outlets
Facility management teams can establish routine measurement points and compare results periodically.
This can create a more structured approach to water quality monitoring.
Reagent-Free Advantage for Routine Checks
If technicians need to perform frequent measurements, testing convenience becomes important.
The Linshang LS310 provides reagent-free routine measurement.
This can reduce the need for chemical preparation during basic field screening and makes the instrument practical for repeated comparative testing.
Can LS310 Replace Laboratory Testing?
No single portable instrument should automatically be treated as a replacement for comprehensive laboratory analysis.
Water quality can involve parameters and contaminants that require dedicated laboratory methods.
The LS310 is particularly useful for:
Routine screening
Before-and-after comparisons
Trend monitoring
Field measurements
Preliminary investigation
If results indicate an unusual condition, further laboratory testing can be considered.
LS310 vs TDS Meter for Water Filter Testing
If the objective is simply to compare TDS before and after an RO system, a conventional TDS meter may be sufficient.
If the user wants to compare several water quality indicators, the LS310 provides a broader solution.
In simple terms:
TDS Meter = One primary parameter
Linshang LS310 = Six parameters
The best choice depends on how much information is required.
Water Filter Testing in Malaysia
Water filtration is used across Malaysia in:
Residential properties
Offices
Factories
Schools
Restaurants
Commercial buildings
Hotels
Industrial facilities
For companies responsible for installation and maintenance, portable multi-parameter water testing can provide useful information during routine service work.
Looking for Linshang LS310 Water Quality Tester in Malaysia?
MTM Precision supplies professional water quality, environmental and industrial testing instruments in Malaysia.
If you need an instrument for water filtration, RO water or general water quality screening, contact our team to discuss your application.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia
🌐 Website: www.mtmpre.com.my
📧 Email: mtmpre@yahoo.com
📱 WhatsApp: +6016-660 7346
16 Aug 2026