How to Choose a Multifunction Network Cable Tester Why Noyafa NF-859GS Malaysia
How to Choose a Multifunction Network Cable Tester Why Noyafa NF-859GS Malaysia
Choosing a network cable tester should not be based only on whether it can check cable continuity. Modern network installations involve Ethernet cabling, PoE devices, network switches and, increasingly, fibre optic connections.
For technicians who regularly install or troubleshoot these systems, a multifunction tester can be more practical than carrying several separate tools.
The Noyafa NF-859GS Multifunction Network Cable Tester combines cable tracing, continuity testing, cable length measurement, PoE testing, Port Flash and other useful functions in one portable instrument.
Here are some important factors to consider when choosing a network cable tester in Malaysia.
1. Choose More Than a Basic Wiremap Tester
A basic LAN tester may be sufficient when the only requirement is checking whether an RJ45 cable has been wired correctly.
However, professional network troubleshooting often requires more.
Technicians may need to:
Trace an unidentified cable
Check cable continuity
Measure cable length
Locate a network connection
Check PoE
Identify a switch port
Verify connector termination
Perform basic fibre troubleshooting
The NF-859GS combines several of these capabilities into one instrument.
2. Look for Cable Tracing Capability
Cable tracing is especially useful when working with existing network installations.
In an office, factory or commercial building, dozens of Ethernet cables may enter the same network cabinet.
If the cables are poorly labelled or not labelled at all, finding the correct cable manually can take considerable time.
The Scan function of the Noyafa NF-859GS helps technicians trace and identify the target network cable.
This makes it particularly useful for maintenance and renovation work.
3. Cable Length Measurement Can Save Troubleshooting Time
Knowing the approximate length of an installed network cable can be useful when investigating cable problems.
The NF-859GS supports cable length measurement over approximately 2.5 to 200 metres.
This can help technicians evaluate cable runs installed:
Above ceilings
Inside walls
Through conduits
Inside cable trays
Under raised floors
Between different rooms or building areas
Instead of physically following the entire cable route, technicians can obtain additional information directly from the tester.
4. Consider PoE Testing
PoE has become increasingly important in modern network installations.
It is commonly used with:
IP CCTV cameras
Wireless access points
VoIP phones
Access control systems
Other PoE-enabled network devices
If your work involves these systems, choosing a tester with PoE testing capability can be much more useful than purchasing a simple LAN cable tester.
The Noyafa NF-859GS includes PoE testing as one of its main functions.
5. Port Identification Is Useful for Network Maintenance
Finding the correct network switch port can be frustrating when dealing with a large switch or network cabinet.
The Port Flash function of the NF-859GS assists tehnicians in identifying the corresponding switch port.
This can be particularly valuable in offices, server rooms, CCTV systems and commercial network installations.
6. Check Whether You Need Cable Quality Testing
RJ45 termination problems are a common source of network faults.
A connector may look properly installed but still have poor contact or termination quality.
The NF-859GS provides a QC testing function, giving installers another useful method for checking cable termination during installation and troubleshooting.
7. Consider Fibre Optic Requirements
Many modern networks use both copper Ethernet and fibre optic cabling.
The Noyafa NF-859GS includes a built-in 10mW Visual Fault Locator (VFL).
The VFL can be used for basic optical fibre continuity and visible fault troubleshooting.
This makes the NF-859GS particularly attractive for technicians who mainly work with Ethernet but occasionally need basic fibre troubleshooting capability.
8. Choose a Tester Based on Your Actual Work
Not every technician needs the most advanced network tester available.
The correct choice depends on the type of work performed.
For basic home network cable checking, a simple continuity tester may be sufficient.
However, technicians working with CCTV, structured cabling, office networks, PoE systems and network maintenance may benefit from a multifunction instrument.
The NF-859GS combines:
Cable Scan
Continuity Test
Cable Length Test
QC Test
PoE Test
Port Flash
NCV Detection
LED Lighting
It also provides a 10mW VFL for basic fibre optic troubleshooting.
Who Should Consider the Noyafa NF-859GS?
The NF-859GS is suitable for:
Network installers
CCTV contractors
IT technicians
System integrators
Telecom technicians
Building maintenance teams
Structured cabling contractors
Network maintenance personnel
For these users, the value of a multifunction tester comes from reducing the number of individual tools required for everyday troubleshooting.
Is the Noyafa NF-859GS Worth Considering in Malaysia?
If your work only requires basic RJ45 continuity testing, you may not need all the functions offered by the NF-859GS.
However, if you regularly perform cable tracing, cable length measurement, PoE testing, switch port identification and network troubleshooting, the additional functions can be very useful.
The Noyafa NF-859GS is therefore a practical choice for professional technicians looking for a versatile network cable tester in Malaysia.
Looking for Noyafa NF-859GS in Malaysia?
MTM Precision supplies professional network testing, CCTV testing, fibre optic and technical instruments in Malaysia.
Contact us for Noyafa NF-859GS availability, quotation and product information.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Website: www.mtmpre.com.my
Email: mtmpre@yahoo.com
WhatsApp: +6016-6607346
16 Aug 2026
