Noyafa NF-859GS for Network Installation Testing and Commissioning Malaysia
Noyafa NF-859GS for Network Installation Testing and Commissioning Malaysia
Completing the physical installation of Ethernet cables does not necessarily mean a network is ready for use.
Before handing over a new network installation, technicians should check the cabling, connectors and related network connections to identify installation problems before computers, IP cameras, wireless access points and other equipment are put into operation.
The Noyafa NF-859GS Multifunction Network Cable Tester combines several useful functions for network installation, testing and troubleshooting, making it a practical tool for network contractors and IT technicians in Malaysia.
Why Test Network Cables Before Commissioning?
Network cable problems are much easier to correct during installation than after a system has been handed over.
Common installation issues may include:
Incorrect cable termination
Poor RJ45 crimping
Open or short circuits
Incorrect cable identification
Damaged Ethernet cables
Wrong switch connections
PoE-related problems
Testing during commissioning helps technicians identify these issues before they become customer complaints or service calls.
Check Cable Continuity
One of the basic commissioning checks is verifying the physical network cable.
The NF-859GS provides cable continuity testing to help technicians check network cable wiring conditions.
This is useful after terminating Ethernet cables at:
RJ45 connectors
Network outlets
Patch panels
Equipment connections
Checking continuity before connecting network equipment can help eliminate basic cabling problems early.
Check RJ45 Termination Quality
RJ45 connectors may look properly installed even when the termination is not ideal.
Poor termination can result in unstable or intermittent network communication.
The QC Test function of the Noyafa NF-859GS can assist technicians in checking cable termination quality.
For contractors preparing many network cables during a project, this can be a useful part of the commissioning process.
Trace and Identify Installed Cables
Large network projects can involve dozens or hundreds of Ethernet cables.
During commissioning, technicians need to make sure each network outlet corresponds to the correct cable inside the communication room or network cabinet.
The Cable Scan function helps technicians trace and identify target Ethernet cables.
This can be particularly useful when checking:
Office network points
CCTV camera connections
Wireless access points
IP phones
Access control connections
Other Ethernet network devices
Measure Ethernet Cable Length
The NF-859GS supports cable length measurement from approximately 2.5 to 200 metres.
Cable length measurement can provide useful information when checking installed network infrastructure.
It is particularly useful for cables routed:
Above ceilings
Inside walls
Through conduits
Under raised floors
Along cable trays
Between different rooms
This information may also assist with future network documentation and maintenance.
Check PoE Connections Before Handover
Modern network projects increasingly include PoE equipment.
Typical examples include:
IP CCTV cameras
Wireless access points
VoIP phones
Access control equipment
Other PoE-enabled network devices
The NF-859GS includes PoE testing capability, allowing technicians to perform additional checks during installation and troubleshooting.
Checking PoE-related connections before project handover can help reduce problems when powered network devices are commissioned.
Identify the Correct Switch Port
During commissioning, technicians may also need to verify which switch port corresponds to a particular network cable.
The Port Flash function of the NF-859GS assists with switch port identification.
This can help technicians confirm connections and improve network labelling and documentation.
Useful for CCTV Network Commissioning
IP CCTV installations can involve large numbers of Ethernet and PoE connections.
Before handing over a CCTV project, technicians may need to verify:
Camera network cables
RJ45 termination
Cable identification
PoE connections
Switch ports
The NF-859GS combines several of these testing functions in one instrument, making it useful for CCTV contractors and system integrators.
Useful for Office Network Projects
New offices may contain network points for computers, printers, wireless access points, IP phones and CCTV cameras.
Testing the cabling before employees move into the office can help identify installation problems while access to ceilings, cabinets and network rooms is still relatively easy.
This can reduce disruption after the office becomes operational.
Useful for Factory and Warehouse Projects
Factories and warehouses often have longer cable routes and network devices spread across large areas.
Network cables may connect offices, CCTV systems, access points and other equipment across the facility.
Testing these connections before commissioning can reduce the need for technicians to return later to investigate basic cabling faults.
Basic Fibre Optic Troubleshooting
Modern network projects may combine Ethernet and fibre optic infrastructure.
The Noyafa NF-859GS incorporates a built-in 10mW Visual Fault Locator (VFL) for basic fibre optic troubleshooting.
This gives network technicians an additional tool for basic fibre continuity and visible fault checks when required.
NF-859GS as a Multifunction Commissioning Tool
The Noyafa NF-859GS combines:
Cable Scan
Cable Continuity Test
Cable Length Test
QC Test
PoE Test
Port Flash
NCV Detection
LED Lighting
It also includes a 10mW VFL for basic fibre optic troubleshooting.
For contractors who regularly install network infrastructure, combining these functions into one portable instrument can simplify everyday installation and commissioning work.
Who Should Use the Noyafa NF-859GS?
The NF-859GS is suitable for:
Network contractors
Structured cabling installers
CCTV contractors
IT technicians
System integrators
Telecom technicians
Building maintenance teams
Factory maintenance personnel
Noyafa NF-859GS Network Installation Tester Malaysia
Professional network installation is not only about pulling cables and installing connectors.
Testing before commissioning helps contractors identify problems early and provides greater confidence before project handover.
The Noyafa NF-859GS combines multiple practical network testing functions for installation, commissioning and subsequent maintenance, making it a useful network cable tester for professional applications in Malaysia.
Looking for Noyafa NF-859GS in Malaysia?
MTM Precision supplies professional network cable testing, CCTV testing, fibre optic and technical instruments in Malaysia.
Contact us for Noyafa NF-859GS availability, quotation and product information.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Website: www.mtmpre.com.my
Email: mtmpre@yahoo.com
WhatsApp: +6016-6607346
16 Aug 2026
