Myzox MJ-600S for Automated Warehouse, AGV and ASRS Floor Leveling Malaysia
Myzox MJ-600S for Automated Warehouse, AGV and ASRS Floor Leveling Malaysia
Automated warehouses are changing the requirements of modern industrial construction. Facilities using Automated Guided Vehicles (AGVs), Automated Storage and Retrieval Systems (ASRS), robotic handling equipment and high-density storage systems depend on carefully planned floors and infrastructure.
During construction, contractors need reliable methods to establish and monitor floor elevations across large working areas.
The Myzox MJ-600S Rotating Laser with D-RE2 Digital Laser Detector Set provides a professional solution for construction elevation control in automated warehouse, logistics centre and industrial flooring projects in Malaysia.
With a working radius of up to 300 m, specified accuracy of 卤1.75 mm at 30 m and digital detector resolution selectable down to 0.5 mm, the MJ-600S is particularly relevant to repetitive floor elevation checking during construction.
What Is an Automated Warehouse?
An automated warehouse uses technology to move, store and retrieve goods with reduced manual handling.
Systems may include:
Automated Guided Vehicles (AGVs)
Autonomous Mobile Robots (AMRs)
Automated Storage and Retrieval Systems (ASRS)
Robotic pallet handling
Automated conveyors
High-bay racking
Automated picking systems
Smart warehouse control systems
These technologies are increasingly used in logistics, manufacturing and distribution facilities.
Why Does Floor Construction Matter?
Automated equipment interacts continuously with the floor.
Depending on the system, floor characteristics may influence:
Vehicle movement
Equipment stability
Navigation
Material handling
Racking installation
Machine positioning
Operational reliability
The required floor tolerance depends on the equipment manufacturer, warehouse design and project specification.
AGV Floor Requirements
AGVs travel along planned routes within factories and warehouses.
The floor conditions required for an AGV system depend on factors such as:
Vehicle design
Wheel configuration
Operating speed
Payload
Navigation technology
Route design
Contractors should obtain the required floor specification from the system designer or equipment manufacturer.
AMR Floor Applications
Autonomous Mobile Robots may travel more freely than traditional fixed-route AGVs.
Even so, suitable floor construction remains important.
During construction, elevation control can help contractors maintain the specified floor reference across the operating area.
What Is ASRS?
ASRS stands for Automated Storage and Retrieval System.
These systems automatically place and retrieve goods from storage locations.
They are often used in:
High-bay warehouses
Distribution centres
Manufacturing plants
Cold storage facilities
E-commerce logistics hubs
Automated pallet warehouses
Because the storage and handling systems can be highly engineered, building and floor construction should follow the specified project requirements.
How Can the Myzox MJ-600S Help?
The MJ-600S creates a rotating horizontal laser reference.
The D-RE2 Digital Laser Detector can then be moved between different floor positions.
This allows construction teams to compare multiple locations against the same horizontal reference.
The system is particularly useful for construction-stage elevation control.
Pre-Pour Floor Checking
Before concrete placement, contractors may need to verify:
Prepared ground
Sub-base elevation
Formwork height
Concrete reference levels
Floor preparation areas
Detecting elevation differences before the concrete pour can help reduce corrective work later.
Elevation Checking During Concrete Construction
During suitable concrete floor construction operations, the MJ-600S can remain established as the horizontal reference.
Workers can use the D-RE2 at different locations to monitor elevation as work progresses.
This can provide useful construction feedback while adjustments may still be possible.
D-RE2 Digital Height Information
The D-RE2 provides numerical information showing the difference between the detected position and the laser reference.
This can be useful for repetitive floor checking because the operator receives more information than a simple high, low or on-level indication.
Detector Resolution Down to 0.5 mm
Selectable D-RE2 resolutions include:
0.5 mm
1 mm
2 mm
5 mm
10 mm
Different settings can be selected according to the construction task.
For closer elevation monitoring, a finer detector resolution may be useful.
Does 0.5 mm Resolution Mean 0.5 mm Accuracy?
No.
Detector resolution and overall system accuracy are different specifications.
The D-RE2 provides resolution down to 0.5 mm, while the MJ-600S rotating laser has a specified accuracy of:
卤1.75 mm at 30 m
For professional QA/QC work, the complete system specification and project tolerance should always be considered.
D-RE2 0 Set Function
The D-RE2 includes a 0 Set function.
This allows a detected position to be established as the reference.
Subsequent floor positions can then be compared against this reference.
This is useful when many locations need to be checked during construction.
Up to 300 m Working Radius
Automated warehouses and distribution centres can cover very large floor areas.
The MJ-600S provides a working radius of up to 300 m when used with the appropriate detector.
On suitable open construction areas, this can allow many measurement points to reference one instrument setup.
Why Is a Long Working Range Useful?
Moving the rotating laser unnecessarily can complicate construction reference control because each new setup needs to be correctly established.
A longer working radius can help reduce instrument repositioning.
This is particularly valuable in:
Large logistics centres
Distribution warehouses
Manufacturing facilities
High-bay warehouses
E-commerce fulfillment centres
AGV and AMR Operating Areas
Large automated facilities may contain dedicated zones for mobile robots and vehicles.
The MJ-600S can support construction elevation checks across these areas.
However, final floor suitability should be evaluated according to the requirements of the AGV or AMR supplier.
A rotating laser alone cannot determine every operational floor characteristic.
ASRS and High-Bay Areas
ASRS installations may involve tall storage structures and specialized handling equipment.
Construction elevation control is one part of preparing the facility.
The MJ-600S can support suitable floor and foundation elevation checks, while final installation should follow the equipment manufacturer's tolerances.
Equipment Foundation Level Checking
Automated facilities may contain fixed machinery in addition to mobile robots.
Potential equipment includes:
Conveyors
Storage cranes
Robotic cells
Sorting equipment
Automated packing systems
Production machinery
The MJ-600S can provide a horizontal construction reference for suitable equipment foundation and concrete base checks.
Is an Automated Warehouse Floor Always a Super Flat Floor?
Not necessarily.
The required floor specification depends on the automation system.
Some high-bay or defined-traffic applications may require specialized Super Flat Floor characteristics.
Other AGV or AMR applications may have different requirements.
Contractors should not assume that one floor specification applies to every automated warehouse.
Can MJ-600S Certify an AGV or ASRS Floor?
Not by itself.
The MJ-600S is useful for construction elevation control.
Final verification may require:
Specialized floor profiling
Defined measurement procedures
Equipment manufacturer requirements
Project-specific acceptance criteria
Formal QA/QC documentation
The required method should be determined before final inspection.
Floor Flatness vs Floor Levelness
Automated warehouse projects should distinguish between these two characteristics.
Floor flatness generally concerns localized surface variation.
Floor levelness generally concerns elevation changes relative to a horizontal reference over a broader area.
The MJ-600S is particularly useful for construction elevation reference checking.
Automatic Leveling Range 卤5掳
The MJ-600S provides an automatic leveling range of 卤5掳.
Once correctly positioned within the specified range, it automatically establishes its horizontal laser reference.
This helps simplify setup on active industrial construction projects.
IP66 and IP67 Protection
Construction environments may expose measurement equipment to dust and moisture.
The MJ-600S carries an IP66 protection rating, while the D-RE2 carries an IP67 protection rating.
This makes the combination suitable for demanding professional site conditions.
Approximately 34.5 Hours Continuous Operation
The MJ-600S provides approximately 34.5 hours of continuous operation under specified conditions.
Large warehouse floor projects may involve extended construction periods, making long operating time useful.
One-Person Elevation Checking
For suitable repetitive measurements, one worker equipped with the D-RE2 can move around the working area after the MJ-600S has been correctly established.
This can help improve manpower efficiency during large floor projects.
Who Should Consider the MJ-600S?
Potential users include:
Automated warehouse contractors
AGV facility contractors
ASRS project contractors
Logistics centre contractors
Industrial flooring contractors
Concrete contractors
Factory contractors
Main contractors
QA/QC engineers
Site engineers
Surveying teams
Choosing Leveling Equipment for Automated Warehouses
Before selecting measurement equipment, contractors should determine:
Required floor tolerance
Automation system requirements
Floor area
Working range
Required measurement resolution
Construction QA/QC procedure
Final acceptance method
Whether specialized floor profiling is required
This helps ensure that the correct equipment is used at each stage of the project.
Myzox Authorized Distributor in Malaysia
MTM Precision Sdn. Bhd. supplies professional Myzox surveying and construction equipment in Malaysia.
As a Myzox Authorized Distributor in Malaysia, MTM Precision can assist industrial flooring, warehouse and automation project contractors in selecting suitable equipment for construction elevation control.
For automated warehouses, AGV facilities, ASRS projects and industrial floor construction in Malaysia, consider the Myzox MJ-600S Rotating Laser with D-RE2 Digital Laser Detector Set.
Contact MTM Precision
MTM Precision Sdn. Bhd.
Myzox Authorized Distributor in Malaysia
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Website: www.mtmpre.com.my
Email: mtmpre@yahoo.com
WhatsApp: +6016-6607346
Working on an Automated Warehouse, AGV, AMR, ASRS or Super Flat Floor project in Malaysia?
Contact MTM Precision for the Myzox MJ-600S with D-RE2 Digital Laser Detector Set, application information and quotation.
16 Aug 2026
