Myzox TK-10 Monitoring Prism for Building Movement Monitoring Malaysia

Myzox TK-10 Monitoring Prism for Building Movement Monitoring

 

Building movement monitoring is an important part of many construction, excavation and infrastructure projects.

 

The Myzox TK-10 Monitoring Prism L-Bar Type provides surveyors and engineers with a fixed target that can be repeatedly measured using a total station to monitor positional changes over time.

 

It is suitable for establishing permanent or semi-permanent monitoring points on buildings and other structures.

 

MTM Precision Sdn. Bhd. is an authorized distributor of Myzox in Malaysia.

 

Why Monitor Building Movement?

 

Buildings may require monitoring when construction activities occur nearby or when engineers need to verify structural movement over a period of time.

 

Typical situations include:

 

Deep excavation beside existing buildings

 

Basement construction

 

Foundation works

 

Piling activities

 

Tunnelling projects

 

Major infrastructure construction

 

Adjacent demolition work

 

Long-term structural observation

 

Retaining structure construction

 

Repeated survey measurements help engineers determine whether monitored points remain stable or show measurable displacement.

 

How Does a Monitoring Prism Work?

 

A monitoring prism acts as a fixed reflective target for a total station.

 

The prism is installed at a selected location on the building. The surveyor then measures its position from an established survey station or monitoring network.

 

A simplified monitoring process is:

 

Install Prism → Establish Baseline Position → Measure with Total Station → Record Data → Repeat Survey → Compare Coordinates

 

Changes between measurement periods can then be evaluated by the responsible surveyor or engineer.

 

Why Use Myzox TK-10 for Building Monitoring?

 

The Myzox TK-10 is designed specifically for monitoring applications rather than temporary conventional surveying.

 

Its compact L-bar configuration allows it to be installed at selected structural monitoring points where a normal prism pole arrangement would not be practical.

 

Key Specifications

 

Prism size: 1 inch / 25 mm

 

Prism constant: -25 mm

 

Prism height: 60 mm

 

Beam deviation: 5″

 

Dimensions: H90 × W86.5 × D30 mm

 

Weight: approximately 207 g

 

X/Y directional adjustment

 

Anti-drop design

 

Waterproof sealing design

 

Where Can Monitoring Prisms Be Installed?

 

Depending on the monitoring design and site conditions, prisms may be installed at selected points such as:

 

Building façades

 

Structural columns

 

Concrete walls

 

Retaining walls

 

Perimeter structures

 

Bridge structures

 

Construction boundaries

 

Other engineered monitoring locations

 

The actual prism locations should be selected according to the monitoring plan and required measurement geometry.

 

Monitoring Existing Buildings Near Excavation Works

 

One common application is monitoring buildings located beside an excavation.

 

Monitoring prisms can be fixed at selected locations on surrounding structures before major excavation activities begin.

 

Initial measurements establish baseline positions.

 

During construction, the same prisms are measured repeatedly. Comparing new measurements against baseline data helps the project team evaluate whether positional changes have occurred.

 

Monitoring Prism vs Standard Survey Prism

 

A conventional prism mounted on a prism pole is ideal for many normal surveying activities where the target needs to move from point to point.

 

Building monitoring has different requirements.

 

The target often needs to remain at the same physical location for weeks, months or longer.

 

A fixed monitoring prism such as the Myzox TK-10 is therefore better suited to repeated observations of the same monitoring point.

 

Importance of Prism Constant

 

The Myzox TK-10 has a specified prism constant of -25 mm.

 

When conducting precision monitoring work, the correct prism constant should be entered into the total station according to the instrument manufacturer's procedures and the monitoring setup.

 

Using the appropriate prism settings helps maintain consistency across repeated observations.

 

Total Station for Building Movement Monitoring

 

Monitoring prisms can be observed using suitable total stations.

 

Depending on the project, measurements may include:

 

Horizontal angle

 

Vertical angle

 

Slope distance

 

Coordinates

 

Elevation

 

Horizontal displacement

 

Vertical displacement

 

The monitoring methodology, measurement interval and allowable movement limits should be established by the responsible project professionals.

 

Applications Beyond Buildings

 

The Myzox TK-10 can also support monitoring applications involving:

 

Retaining walls

 

Bridges

 

Slopes

 

Excavations

 

Infrastructure structures

 

Civil engineering projects

 

Construction sites

 

This makes it a useful surveying accessory for companies involved in structural and deformation monitoring in Malaysia.

 

Looking for Myzox TK-10 Monitoring Prism in Malaysia?

 

MTM Precision supplies Myzox monitoring prisms and professional surveying accessories in Malaysia.

 

We support surveyors, civil engineering contractors, consultants and construction professionals requiring reliable accessories for total station and monitoring applications.

 

Contact MTM Precision

 

MTM Precision Sdn. Bhd.

Myzox Authorized Distributor in Malaysia

 

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia.

 

Website: www.mtmpre.com.my

Email: mtmpre@yahoo.com

WhatsApp: +6016-6607346

 

Contact MTM Precision for Myzox TK-10 Monitoring Prism price, availability and product enquiries in Malaysia.


 

18 Aug 2026