Do I Need a WBGT Meter for My Factory? Heat Stress Monitoring Guide Malaysia

Do I Need a WBGT Meter for My Factory? Heat Stress Monitoring Guide Malaysia

 

Many Malaysian factories already own instruments for measuring:

 

Temperature • Humidity • Noise • Lighting • Gas • Airflow

 

But during periods of extreme hot weather, another question becomes increasingly important:

 

“Do we need a WBGT Heat Stress Meter?”

 

The answer depends on the working environment.

 

If employees work around furnaces, boilers, ovens, hot machinery, poorly ventilated production areas, loading bays or outdoor facilities, WBGT monitoring may be worth considering as part of the factory's occupational heat-risk assessment.

 

What Is a WBGT Meter?

 

WBGT stands for:

 

Wet Bulb Globe Temperature

 

A WBGT meter is designed to provide environmental measurements used in heat-stress assessment.

 

Depending on the instrument and measurement method, relevant factors can include:

 

Natural wet-bulb temperature

 

Globe temperature

 

Air temperature

 

Humidity

 

Radiant thermal conditions

 

This makes a WBGT meter different from an ordinary thermometer.

 

Which Factories May Need WBGT Monitoring?

 

Heat exposure is not limited to one manufacturing sector.

 

Potential applications include:

 

Metal fabrication

 

Automotive manufacturing

 

Food processing

 

Plastic manufacturing

 

Rubber processing

 

Electronics

 

Foundries

 

Steel processing

 

Chemical manufacturing

 

Packaging

 

Warehousing

 

Palm oil processing

 

General manufacturing

 

The key question is not necessarily what the factory produces.

 

The important question is:

 

What thermal environment are the workers exposed to?

 

Sign #1: Workers Are Close to Furnaces or Ovens

 

Industrial furnaces and ovens can create significant radiant heat.

 

Examples include:

 

Heat-treatment furnaces

 

Baking ovens

 

Drying ovens

 

Industrial cooking equipment

 

Foundry operations

 

Workers may experience heat from both the surrounding air and nearby hot surfaces.

 

A WBGT meter's black globe sensor helps assess radiant thermal conditions.

 

Sign #2: Your Factory Has a Boiler Room

 

Boilers and steam systems can create hot indoor environments.

 

Potential heat sources include:

 

Boiler surfaces

 

Steam pipes

 

Hot-water pipes

 

Pumps

 

Valves

 

Mechanical equipment

 

A temperature reading at the office does not represent the boiler operator's working environment.

 

Representative measurements should be taken where employees actually work.

 

Sign #3: Workers Regularly Complain That an Area Is Too Hot

 

Comments such as:

 

“This production line is extremely hot in the afternoon.”

 

should not automatically be dismissed as subjective.

 

They can be a reason to investigate.

 

Instead of relying only on perception, the safety team can collect environmental measurements at the affected work location.

 

This turns:

 

“It feels hot.”

 

into:

 

measurable workplace data.

 

Sign #4: Your Factory Has Metal Roofing

 

Large factories and warehouses with metal roofs can become very warm during sunny periods.

 

The situation may be more noticeable where:

 

Roof insulation is limited

 

Ventilation is insufficient

 

Internal machinery produces heat

 

Workers perform physical tasks

 

External hot weather and internal heat sources can combine to create challenging conditions.

 

Sign #5: Employees Work at Loading Bays

 

Loading bays are often somewhere between indoor and outdoor environments.

 

Workers may experience:

 

Direct or indirect sunlight

 

Hot concrete

 

Vehicle heat

 

High humidity

 

Limited airflow

 

Physical material handling

 

Conditions can be very different from the main production area.

 

Therefore, loading bays may require separate assessment.

 

Sign #6: Employees Load or Unload Containers

 

A shipping container exposed to Malaysian sunlight can become a particularly hot work area.

 

Employees may enter the container to:

 

Unload cartons

 

Load products

 

Arrange goods

 

Inspect cargo

 

The combination of an enclosed environment and physical workload can make this a relevant location for heat monitoring.

 

A warehouse reading should not automatically be assumed to represent conditions inside the container.

 

Sign #7: Your Maintenance Team Works on the Roof

 

Factory maintenance does not happen only indoors.

 

Technicians may work on:

 

Rooftop HVAC systems

 

Solar panels

 

Cooling towers

 

Exhaust systems

 

Roof structures

 

These workers may experience direct sunlight and heated roof surfaces.

 

Portable WBGT meters can be useful because they can follow maintenance teams into different working environments.

 

Sign #8: Workers Wear Significant PPE

 

Factory employees may need:

 

Coveralls

 

Gloves

 

Safety helmets

 

Respiratory protection

 

Chemical protective clothing

 

Heat-resistant PPE

 

Specialized protective equipment

 

PPE may be essential for controlling other hazards.

 

However, certain clothing can also affect the body's ability to dissipate heat.

 

This means environmental conditions should be assessed together with workload and PPE.

 

Sign #9: Production Generates Significant Heat

 

Some factories contain many operating machines.

 

Heat can come from:

 

Motors

 

Compressors

 

Pumps

 

Furnaces

 

Dryers

 

Boilers

 

Production machinery

 

Electrical equipment

 

Individually, each heat source may seem manageable.

 

Together, they can affect the overall thermal environment.

 

Sign #10: Your Factory Is Preparing for Extreme Hot Weather

 

Even factories without obvious furnace or boiler exposure may experience warmer indoor conditions during prolonged periods of high outdoor temperature.

 

This is especially relevant for large industrial buildings that rely heavily on natural ventilation.

 

Establishing baseline measurements before extreme conditions occur can help the safety team understand how the workplace changes during hot periods.

 

Where Should a Factory Measure WBGT?

 

Do not simply measure at the factory entrance.

 

Identify representative work zones.

 

For example:

 

Zone A — Production Line

 

Zone B — Furnace Area

 

Zone C — Boiler Room

 

Zone D — Warehouse

 

Zone E — Loading Bay

 

Zone F — Outdoor Yard

 

Zone G — Rooftop Maintenance Area

 

Different zones may have very different thermal conditions.

 

One WBGT Reading Is Not “The Factory WBGT”

 

Large factories rarely have one uniform thermal environment.

 

Saying:

 

“Our factory WBGT is X.”

 

may be an oversimplification if the measurement was taken at only one location.

 

A better approach is to identify representative worker environments and monitor them separately.

 

When Should Measurements Be Taken?

 

Time matters as much as location.

 

For example:

 

9:00 AM → Production Area

 

12:00 PM → Production Area

 

3:00 PM → Production Area

 

may produce different results.

 

The difference can become particularly noticeable in buildings affected by solar heating.

 

Organizations should establish representative measurement times based on actual operations and applicable occupational heat-monitoring procedures.

 

WBGT Meter vs Factory Thermometer

 

A wall-mounted thermometer answers:

 

“What is the air temperature here?”

 

A WBGT meter addresses a different question:

 

“What are the environmental heat-stress conditions at this workplace?”

 

For general temperature monitoring, the thermometer remains useful.

 

For occupational heat-stress assessment, WBGT may be more appropriate.

 

WBGT Meter vs Infrared Thermometer

 

Factories frequently use infrared thermometers.

 

But these instruments measure surface temperature.

 

Infrared Thermometer

 

Useful for:

 

Motors

 

Bearings

 

Pipes

 

Electrical equipment

 

Machinery

 

WBGT Meter

 

Useful for:

 

Production workers

 

Maintenance personnel

 

Boiler operators

 

Loading crews

 

Outdoor workers

 

Therefore:

 

Machine temperature → IR thermometer

 

Worker thermal environment → WBGT meter

 

WBGT Meter vs Thermal Camera

 

Thermal cameras are excellent predictive-maintenance tools.

 

They can help identify:

 

Electrical hotspots

 

Overheated bearings

 

Abnormal motor temperatures

 

Insulation problems

 

But they do not replace a WBGT meter for occupational heat-stress assessment.

 

A modern factory may use both.

 

Who Should Manage WBGT Monitoring?

 

Depending on the organization, responsibility may involve:

 

Safety and Health Officer

 

EHS Department

 

HSE Department

 

Safety Committee

 

Facility Management

 

Occupational safety consultant

 

The company should define who measures, records and reviews the results.

 

Start With a Heat Map of Your Factory

 

A useful first step is to divide the workplace into potential heat zones.

 

For example:

 

LOWER HEAT

 

Office / Air-conditioned area

 

↓

 

MODERATE

 

Warehouse / General production

 

↓

 

HIGHER HEAT POTENTIAL

 

Loading bay / Mechanical room

 

↓

 

SPECIAL ATTENTION

 

Boiler / Furnace / Outdoor exposed work

 

The actual classification should be based on appropriate assessment rather than assumptions, but this exercise can help identify where measurements should begin.

 

Then Establish Baseline Measurements

 

Before an extreme-hot-weather period, take representative measurements.

 

This creates a baseline.

 

Later, when unusually hot conditions occur, the safety team can compare how workplace conditions have changed.

 

A practical workflow is:

 

Identify Heat Zones

 

↓

 

Establish Baseline

 

↓

 

Monitor Hot Periods

 

↓

 

Record Work Activity and PPE

 

↓

 

Review Results

 

↓

 

Apply Appropriate Heat Controls

 

Do You Need Data Logging?

 

Factories performing regular monitoring may benefit from better data management.

 

Instead of recording only occasional measurements, data can be organized by:

 

Date + Time + Location + Activity + WBGT

 

This can help identify patterns.

 

For users interested in wireless connectivity and compatible digital workflows, a BLE-enabled WBGT meter may be worth considering.

 

Tenmars TM-288 for Factory Monitoring

 

The Tenmars TM-288 is a portable WBGT Heat Stress Meter suitable for workplace environmental measurements.

 

Its portable format can be useful when an SHO needs to move between different factory zones.

 

For example:

 

Production → Boiler Room → Warehouse → Loading Bay

 

Tenmars TM-188B for Connected Monitoring

 

The Tenmars TM-188B features BLE wireless capability.

 

This can be attractive to factories looking for a more connected monitoring workflow where compatible functionality is required.

 

Potential users include:

 

EHS departments

 

HSE teams

 

Consultants

 

Larger manufacturing facilities

 

Tenmars TM-188D

 

The Tenmars TM-188D is another professional option in the Tenmars WBGT range.

 

Factories comparing TM-288, TM-188B and TM-188D should select according to current specifications and actual measurement requirements.

 

Don't Wait Until Workers Are Already Struggling With Heat

 

Heat monitoring is most useful when it is planned.

 

Instead of buying a meter only after an extreme heat event, factories can establish their monitoring program earlier.

 

This provides time to:

 

Identify measurement points

 

Train responsible personnel

 

Establish baseline data

 

Determine recording procedures

 

Review applicable heat-stress guidance

 

The WBGT meter then becomes part of the factory's environmental safety program rather than an emergency purchase.

 

WBGT Heat Stress Meter for Factory Malaysia

 

MTM Precision supplies professional Tenmars WBGT Heat Stress Meters and industrial environmental testing instruments in Malaysia.

 

Applications include:

 

Manufacturing • Factory • Boiler Room • Furnace • Warehouse • Loading Bay • Maintenance • EHS • HSE • Occupational Safety

 

MTM Precision also supplies related instruments for:

 

Noise • Lighting • Airflow • Temperature • Humidity • Air Quality • Gas Detection • Vibration • Thermal Inspection

 

This allows factories to build a more complete workplace environmental and maintenance instrument system.

 

MTM Precision Sdn Bhd

 

Website: www.mtmpre.com.my

WhatsApp: +6016-660 7346

Email: mtmpre@yahoo.com

 

Showroom & Service Centre

 

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia.

 

Not sure whether your factory needs a WBGT Heat Stress Meter? Contact MTM Precision with your work environment and application. We can help you compare Tenmars TM-288, TM-188B and TM-188D for workplace heat monitoring in Malaysia.


 

20 Aug 2026