Food & Beverage Factory Environmental Problems What Should You Measure Malaysia

Food & Beverage Factory Environmental Problems What Should You Measure Malaysia A food or beverage factory can have many measurement problems at the same time. Production may report: “The processing room becomes too hot.” QA may say: “We need continuous temperature records.” Maintenance may report: “The ventilation airflow seems weaker.” EHS may say: “Workers complain about noise.” The utility team may ask: “We need to check our process water.” The warehouse team may report: “Cold-room temperature keeps fluctuating.” These should not be treated as six unrelated product enquiries. They are all parts of one factory measurement system: Production Environment → Worker Safety → Water Quality → Storage → QA/QC → Maintenance The correct starting point is not: “Which meter do you want?” It is: “Which process has the problem, and what condition needs to be measured?” 1. Start With the Production Process Food and beverage factories can include very different operations: Ingredient preparation Mixing Cooking Filling Bottling Packaging Washing Cold storage Warehousing Wastewater treatment Each process creates different measurement requirements. Therefore, begin with: Process → Problem → Parameter → Instrument 2. Divide the Factory Into Measurement Zones Instead of treating the entire facility as one environment, divide it into zones. For example: Raw Material Area Temperature → Humidity → Storage Condition Processing Area Temperature → Humidity → Airflow → Heat Packaging Area Temperature → Humidity → Lux Utility Area Water Quality → Electrical → Equipment Condition Cold Room Temperature → Data Logging → Mapping Wastewater Area pH → EC/TDS → DO → Turbidity → Gas Where Relevant Now MTM can build a complete solution around the factory. 3. Temperature Can Be a Production Parameter In food manufacturing, temperature may affect more than worker comfort. Depending on the process, temperature can be relevant to: Ingredients Processing Storage Packaging Product handling Cold chain Therefore, different temperature instruments may be required for different measurement objectives. 4. Air Temperature and Product Temperature Are Different This distinction matters. A room may be: 22°C while a product, surface or process is at another temperature. Ask: Are you measuring the room? A product surface? A liquid? A cold room? A machine? The measurement method should follow the target. 5. Use Data Logging When Records Matter A QA department may say: “We need to know the room temperature throughout the entire shift.” A handheld thermometer is not ideal for that objective. A data logger can record: Morning ↓ Production Start ↓ Peak Production ↓ Cleaning ↓ Night This provides a time history. 6. Humidity Can Matter in Production and Storage Depending on the product and process, humidity may influence: Packaging Raw materials Storage Condensation Production environment A temperature / humidity meter or logger can help monitor conditions. 7. Different Areas May Need Different Humidity Monitoring For example: Dry Ingredient Store may have different environmental requirements from: Wet Processing Area or: Packaging Room Do not assume one reading represents the entire factory. 8. Airflow Can Affect Process and Worker Conditions Ventilation may be important around: Processing rooms Cooking areas Packing rooms Utility rooms Wash areas An anemometer can help investigate air velocity at suitable ventilation points and work areas. 9. “The Exhaust Fan Is Running” Is Not a Measurement A fan can operate while actual airflow changes. Possible causes include: Dirty filter Blocked duct Fan deterioration Production layout changes Closed openings Measure: Before Maintenance and After Maintenance to verify improvement. 10. Heat Stress Can Become a Worker-Safety Problem Food factories may contain hot work environments around: Cooking Boilers Steam Ovens Washing Outdoor loading Where occupational heat stress is the concern, WBGT measurement may be appropriate depending on the assessment objective. 11. Noise Can Come From Production Equipment Possible sources include: Filling machines Bottling lines Compressors Pumps Conveyors Packaging machinery Motors A sound level meter can help map area noise. For appropriate worker exposure assessment, personal noise dosimetry may be required. 12. Lighting Can Matter for Inspection and Packing Workers may need to: Inspect products Read labels Check packaging Identify defects Operate equipment A lux meter can help quantify illumination at relevant work surfaces. 13. Process Water Creates Another Measurement Cluster Food and beverage factories may use water for different purposes depending on the process. A customer may say: “We need to monitor our water.” The next question should be: “Which water, and for what purpose?” Possible locations include: Incoming Water Treated Water Process Water Cleaning Water Boiler / Cooling Water Wastewater Each may require different parameters. 14. pH Can Be One Water-Quality Parameter For appropriate applications, pH measurement can help monitor water condition. But pH alone does not describe complete water quality. Depending on the process, other parameters may also be relevant. 15. EC / TDS Can Provide Additional Information Conductivity and TDS measurements can be useful for appropriate water monitoring and comparison. For example: Incoming Water versus Treated Water or: Normal Condition versus Abnormal Condition Trend data can be more useful than one isolated reading. 16. Turbidity May Be Relevant If the concern is: “The water looks cloudy.” a turbidity meter can quantify clarity rather than relying only on visual judgement. Again, instrument selection follows the actual water-quality question. 17. Chlorine May Be Another Parameter in Suitable Applications Where chlorine monitoring is part of the site's water-treatment or sanitation program, an appropriate measurement method may be required. Do not assume a generic multi-parameter meter measures every water parameter. Check the actual sensor or test method. 18. Cold Rooms Need Their Own Measurement Strategy Food factories often contain: Chillers Freezers Cold rooms Refrigerated storage A controller reading at one location does not necessarily represent the entire storage area. Possible solution: Temperature Data Logging ↓ Multiple Locations ↓ Temperature Mapping ↓ Airflow Investigation ↓ Corrective Action ↓ Monitor Again 19. Example: Packaging Room Becomes Humid in the Afternoon Suppose a factory contacts MTM: “Our packaging room seems much more humid after lunch, and we are worried about product packaging.” Possible pathway: Temperature / Humidity Data Logger ↓ Monitor Full Production Shift ↓ Compare Morning / Afternoon ↓ Check Airflow / HVAC ↓ Compare Production Activity ↓ Corrective Action ↓ Continue Monitoring This is both an Environmental and QA/QC problem. 20. Example: Workers Near Cooking Area Complain About Heat Another factory says: “Our workers near the cooking line become extremely hot.” Possible investigation: Temperature / Humidity ↓ WBGT Where Appropriate ↓ Air Velocity ↓ Compare Worker Positions ↓ Investigate Ventilation / Heat Source ↓ Corrective Action ↓ Measure Again This is a worker-safety solution. 21. Example: QA Wants a Basic Process-Water Testing Kit Another customer says: “We want portable meters for checking our water.” MTM should ask: Which water source? Which process? Which parameters are required? A suitable kit may then include appropriate: pH EC / TDS Turbidity Temperature and other required parameters depending on the process. Do not build the kit from product availability alone. Build it from the testing requirement. 22. Example: Cold-Room Temperature Keeps Fluctuating Possible investigation: Independent Temperature Logger ↓ Monitor Full Day ↓ Compare Door Activity ↓ Map Different Rack Locations ↓ Measure Airflow ↓ Investigate Cooling System / Storage Layout ↓ Measure Again Now MTM is supporting the factory from production through storage. What Instruments Might Be Needed? Depending on the food-factory problem, a solution may include: Temperature & Humidity Meter For environmental spot checks. Temperature / Humidity Data Logger For continuous monitoring. Infrared / Contact Temperature Instrument For appropriate process, equipment or surface-temperature measurements. Anemometer For ventilation and airflow investigation. WBGT Meter For appropriate occupational heat-stress assessment. Sound Level Meter For area noise measurement. Noise Dosimeter For appropriate worker noise-exposure monitoring. Lux Meter For inspection, packaging and work-area illumination. pH Meter For suitable water-quality measurements. EC / TDS Meter For appropriate water monitoring. Turbidity Meter For water-clarity measurement. Other Water-Quality Instruments Where additional parameters are required by the process. Not every food factory needs every instrument. The correct combination depends on: Process + Product + Worker Complaint + QA Requirement + Water System Don't Build the Solution Around Instrument Categories The traditional catalogue says: Thermometer WBGT Meter Lux Meter pH Meter TDS Meter Turbidity Meter The factory says: “Our packaging room is humid.” “Our workers are too hot.” “Our process water has changed.” “Our cold room is unstable.” That is how MTM should organize the solution. From Food-Factory Problem to Measurement Solution The better approach is: Identify Process ↓ Identify Problem ↓ Environmental / Safety / Water / Storage / QA? ↓ Determine Parameters ↓ Select Suitable Instruments ↓ Establish Baseline ↓ Correct ↓ Measure Again This turns a product catalogue into a factory measurement system. One Food Factory Can Connect Four MTM Solution Areas Environmental Temperature → Humidity → Airflow → Data Logging Safety Heat Stress → Noise → Lighting Water Quality pH → EC / TDS → Turbidity → Other Required Parameters QA / QC & Storage Process Temperature → Cold Room → Temperature Mapping → Environmental Records This is exactly the positioning MTM should own: One supplier for the factory's measurement problems. Not: One supplier for one meter. Food & Beverage Factory Environmental, Safety & Water Testing Solutions Malaysia MTM Precision supports: Food manufacturers Beverage manufacturers Processing plants Packaging facilities Cold-storage facilities QA/QC departments EHS teams Maintenance departments Facility managers Water-treatment teams with measurement solutions covering: Temperature Humidity Data Logging Airflow Heat Stress Noise Lux pH EC / TDS Turbidity Water Quality Cold-Room Monitoring Environmental Monitoring MTM's value is not: “We have hundreds of testing instruments.” It is: “Tell us which part of your food or beverage process has a measurement problem. MTM helps determine what needs to be measured.” Need Help Building a Food Factory Testing Setup? Tell MTM: What product are you manufacturing? Which production area has the problem? Is the concern environment, worker safety, process water, cold storage or QA/QC? Which parameters are you currently measuring? Do you need spot testing, troubleshooting or continuous monitoring? We can help identify suitable measurement options for the application. MTM Precision Sdn Bhd Showroom & Service Centre No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia WhatsApp: +6016-660 7346 Email: mtmpre@yahoo.com Website: www.mtmpre.com.my You tell us the production problem. MTM helps you build the measurement solution.

21 Aug 2026