Myzox M-1500GP Mini Prism for Surveying Near Walls Malaysia
Myzox M-1500GP Mini Prism for Surveying Near Walls Malaysia
Measuring points located close to walls, building corners and structural surfaces can be challenging with a conventional full-size prism assembly.
For construction setting out, detail surveys and as-built measurements where compact target positioning is important, the Myzox M-1500GP 1.5-inch Mini Prism provides a practical reflector option.
With its 38 mm prism, 0 mm prism constant, Dual Lock system and wide tilting capability, the M-1500GP is particularly relevant for professional construction and engineering survey teams in Malaysia.
Why Is Surveying Near a Wall Difficult?
The challenge is often not the total station itself.
The problem is physically positioning the target close enough to the required survey point.
A conventional prism assembly may be inconvenient when working:
Beside concrete walls
Near building corners
Around retaining walls
Beside structural columns
Near finished surfaces
Around narrow corridors
Close to foundations
Inside restricted construction areas
A compact mini prism gives the surveyor another option for these situations.
Why a 38mm Mini Prism Helps
The Myzox M-1500GP uses a:
1.5-inch / 38 mm prism
Its compact size makes the overall target smaller than many conventional reflector setups.
This can make it easier to position the target close to structural features.
However, surveyors should still account for the exact geometry of the target setup when determining the actual survey point.
Applications Near Walls
A mini prism can be useful for several types of work.
Wall Setting Out
Surveyors can establish reference positions for new walls based on project coordinates and grid lines.
Building Corner Survey
Compact target positioning can help when measuring or verifying building corners.
As-Built Wall Survey
After construction, survey teams may record the actual wall position for comparison against the design.
Retaining Wall Survey
Civil engineering teams may need to establish or verify retaining wall alignment and structural positions.
Detail Survey
Existing walls and building features may need to be captured during topographic or engineering detail surveys.
Myzox M-1500GP Key Features
The M-1500GP includes:
1.5-inch / 38 mm mini prism
0 mm prism constant
Dual Lock system
Screw Lock / Quick Lock
Wide tilting capability
Maximum tilting angle approximately 38°
Ø9 mm pole
Circular level
Removable prism cover
These characteristics make it a versatile compact reflector for professional field surveying.
Wide Tilting Near Structures
When working close to a wall, the prism may not always be positioned in the ideal orientation.
The M-1500GP provides a maximum tilting angle of approximately 38°, giving the operator additional flexibility to orient the reflector toward the total station.
This can be useful around:
Walls → Corners → Columns → Foundations → Other Structural Obstacles
Dual Lock for Frequent Repositioning
Building surveyors may need to reposition their prism repeatedly.
The M-1500GP provides:
Screw Lock + Quick Lock
This Dual Lock design gives the operator different ways to adjust and secure the prism according to the field situation.
Check the 0mm Prism Constant
The M-1500GP has a 0 mm prism constant.
Before taking measurements, verify that the total station reflector setting corresponds to the prism.
This is especially important when changing from another reflector.
For example:
Standard Prism → Myzox M-1500GP
The physical target has changed, so the instrument settings should also be checked.
Target Height Still Matters
A compact prism does not remove the need for correct survey procedures.
Operators should check:
Prism Constant + Target Height + Target Level + Instrument Setup
If the target height is entered incorrectly, coordinate or elevation results can be affected.
This becomes particularly important during precision construction and as-built work.
Mini Prism vs Reflectorless Near a Wall
Modern total stations may allow direct reflectorless measurements to a wall.
So when would you use a mini prism?
Reflectorless Measurement
Useful when the surface itself is the required target or the point cannot be physically accessed.
Mini Prism
Useful when the surveyor wants a defined reflector target positioned at a specific accessible point.
The correct method depends on the project, required accuracy, surface condition and measurement procedure.
Suitable for Topcon Total Station Users
The M-1500GP can be considered for compatible reflector measurements with professional total station systems.
For teams using Topcon total stations, it can serve as a compact alternative when their standard prism is inconvenient around building structures.
A versatile kit may include:
Topcon Total Station + Standard Prism + Myzox M-1500GP Mini Prism
This gives the operator more flexibility according to site conditions.
Looking for a Mini Prism for Surveying Near Walls in Malaysia?
Common searches include:
Mini Prism for Surveying Near Wall Malaysia
Mini Prism for Building Corner Malaysia
Myzox M-1500GP Malaysia
38mm Mini Prism Malaysia
0mm Mini Prism Malaysia
Construction Mini Prism Malaysia
Topcon Mini Prism Malaysia
Total Station Accessories Malaysia
MTM Precision supplies surveying instruments and accessories for professional surveyors, contractors and engineering teams throughout Malaysia.
Contact MTM Precision
MTM Precision Sdn Bhd
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
Contact MTM Precision for Myzox M-1500GP price, availability and compact mini prism enquiries in Malaysia.
22 Aug 2026