Myzox M-1500GP Mini Prism for Topcon GM Series Malaysia
Myzox M-1500GP Mini Prism for Topcon GM Series Malaysia
Many Malaysian surveyors and construction contractors use Topcon GM Series total stations for setting out, construction surveying, coordinate measurement and as-built work.
A total station is only one part of the surveying system. Choosing the appropriate reflector can also make fieldwork easier.
The Myzox M-1500GP 1.5-inch Mini Prism is a compact reflector option worth considering for compatible reflector measurements, particularly where a conventional full-size prism is difficult to position.
Why Pair a Mini Prism with a Topcon GM Series Total Station?
A standard prism remains useful for general reflector surveying.
However, construction sites often require measurements close to:
Concrete columns
Walls
Foundations
Structural steel
Anchor bolts
Drainage structures
Machinery
Existing buildings
In these situations, a compact mini prism can give the surveyor greater flexibility.
Rather than replacing the standard prism, the M-1500GP can become an additional target in the survey kit.
Myzox M-1500GP Key Specifications
The M-1500GP features:
1.5-inch / 38 mm mini prism
0 mm prism constant
Dual Lock system
Screw Lock / Quick Lock
Wide tilting capability
Maximum tilting angle approximately 38°
Ø9 mm pole
Circular level
Removable prism cover
Its combination of compact size and flexible adjustment makes it particularly relevant to construction survey work.
Important: Set the Correct Prism Constant
When using any reflector with a total station, the operator should confirm the prism constant required for that reflector.
The Myzox M-1500GP is specified with a 0 mm prism constant.
Before taking important measurements with a Topcon total station, verify the reflector configuration.
A useful routine is:
Select M-1500GP → Confirm 0mm Prism Constant → Enter Correct Target Height → Level Target → Measure
Do not assume the previous prism setting remains correct after changing reflectors.
M-1500GP for Construction Setting Out
One of the strongest applications for a mini prism is construction setting out.
Survey teams using Topcon GM Series instruments may need to establish:
Grid Points → Columns → Walls → Foundations → Structural Offsets → Anchor Locations
As construction progresses, physical access around these points becomes more restricted.
The compact M-1500GP can be useful when target positioning becomes difficult with a larger prism.
M-1500GP for As-Built Survey
The same combination can also be useful after construction.
Surveyors may use their total station to measure completed:
Columns
Walls
Foundations
Structural steel
Drainage
Civil structures
These measurements can then be compared against design coordinates or incorporated into as-built records.
M-1500GP for Detail Survey
Detail surveys often involve collecting many points around buildings and infrastructure.
A compact prism can make it easier to position a defined reflector close to selected features.
This is especially useful around:
Building corners
Kerbs
Drains
Walls
Columns
Utility structures
Why the Dual Lock System Is Useful
The M-1500GP uses a Dual Lock design.
Operators can choose:
Screw Lock + Quick Lock
During repetitive setting-out work, the prism may be repositioned many times.
The ability to adjust and secure the reflector conveniently can make field operations more efficient.
Wide Tilting for Difficult Target Positions
The M-1500GP offers wide tilting capability with a maximum angle of approximately 38°.
This can help when obstacles prevent ideal prism orientation.
For example:
Wall / Column / Structure → Limited Position → Tilt Prism Toward Total Station
The exact setup should always follow proper surveying procedures.
Mini Prism vs Standard Prism for Topcon GM Users
There is no need to choose only one.
Standard Prism
Useful for general reflector surveying and situations where a larger target is preferred.
M-1500GP Mini Prism
Useful when compact target positioning is important.
A more versatile setup is:
Topcon GM Series + Standard Prism + Myzox M-1500GP
This gives the survey crew more options for different field conditions.
Can I Use the M-1500GP with Every Topcon Total Station?
Prism selection should not be based only on brand names.
Users should confirm:
Reflector measurement capability
Required prism constant
Measurement mode
Target configuration
Required working distance
Project accuracy requirements
If you are unsure about your Topcon total station and Myzox M-1500GP setup, MTM Precision can help check the intended application.
Topcon Surveying Equipment Support in Malaysia
MTM Precision supplies surveying instruments and accessories and also supports professional surveying users through its Puchong showroom and service centre.
Customers looking for a complete setup can enquire about:
Total Station → Prism → Mini Prism → Prism Pole → Tripod → Survey Accessories → Service & Calibration
This provides a more complete solution than purchasing a prism without considering the rest of the surveying system.
Looking for Myzox M-1500GP for Topcon GM Series in Malaysia?
Common searches include:
Myzox M-1500GP for Topcon GM Series Malaysia
Mini Prism for Topcon GM-55 Malaysia
Mini Prism for Topcon GM-105 Malaysia
Topcon Mini Prism Malaysia
38mm Prism for Topcon Malaysia
0mm Prism for Total Station Malaysia
Myzox Mini Prism Malaysia
Total Station Accessories Malaysia
MTM Precision supplies professional surveying instruments and accessories for surveyors, contractors and engineering companies throughout Malaysia.
Contact MTM Precision
MTM Precision Sdn Bhd
Showroom & Service Centre
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
Contact MTM Precision for Myzox M-1500GP pricing, stock availability, Topcon total station accessories, service and calibration enquiries in Malaysia.
22 Aug 2026