Where to Place a Temperature Data Logger in Cold Chain Shipments Malaysia

Where to Place a Temperature Data Logger in Cold Chain Shipments Malaysia

 

Buying a temperature data logger is only the first step in cold-chain monitoring.

 

The next question is equally important:

 

Where should you place the temperature data logger?

 

A logger positioned in the wrong location may provide data that does not represent the conditions you actually want to monitor.

 

For cold-chain shipments using devices such as the Azovtes AE-UT and AE-BUT Disposable Temperature Data Loggers, placement should be considered before the cargo leaves the facility.

 

Why Does Logger Placement Matter?

 

A temperature data logger records conditions at its own monitoring location.

 

It does not automatically tell you the temperature everywhere inside:

 

A carton

 

A pallet

 

A refrigerated truck

 

A cold room

 

A reefer container

 

Temperature can vary from one location to another.

 

Therefore, the correct placement depends on the purpose of the monitoring program.

 

First Question: What Are You Trying to Measure?

 

Before deciding where to put the logger, ask:

 

What information do I actually need?

 

Are you trying to monitor:

 

A specific product?

 

Conditions inside a carton?

 

A pallet?

 

General truck temperature?

 

Conditions near the door?

 

A reefer container?

 

Temperature variation across the entire load?

 

Different questions may require different logger positions.

 

Inside or Outside the Carton?

 

This depends on the monitoring objective.

 

If you want information about the environment surrounding the shipment, the logger may be positioned according to your defined ambient monitoring procedure.

 

If you want the logger to travel closely with a particular product or carton, it may be placed with that shipment according to the packaging and monitoring requirements.

 

The important point is to document where the logger was located.

 

Without knowing the position, interpreting the data later becomes more difficult.

 

Logger Placement in a Refrigerated Truck

 

A refrigerated truck can have different temperature conditions at different locations.

 

Potential differences may occur:

 

Near the refrigeration outlet

 

Near the front

 

In the middle

 

Near the rear door

 

Between pallets

 

At different heights

 

If only one logger is used, its position should be selected according to the purpose of the monitoring exercise.

 

For troubleshooting, several monitoring locations may provide more useful information.

 

Why the Rear Door Can Be Interesting

 

The rear of a refrigerated vehicle may experience different conditions because doors are opened during deliveries.

 

For multi-drop routes, this can happen repeatedly.

 

If a business is investigating temperature changes associated with door opening, a monitoring position near the rear area may provide useful information.

 

However, this does not mean the rear door is always the correct location.

 

The monitoring objective should determine placement.

 

What About the Refrigeration Outlet?

 

Placing a logger directly in the cold airflow from a refrigeration outlet may produce readings that differ significantly from conditions experienced by products elsewhere in the load.

 

This may be useful if you specifically want to investigate supply-air conditions.

 

It may be less representative if your objective is to understand conditions around the cargo.

 

Again:

 

Measure where the information matters.

 

Where to Place a Logger in a Reefer Container

 

Reefer containers can carry large quantities of temperature-sensitive cargo.

 

A single logger provides information from only one monitoring point.

 

For more valuable or sensitive shipments, businesses may consider multiple positions such as:

 

Front → Middle → Rear

 

or:

 

Pallet A → Pallet B → Pallet C

 

The exact monitoring plan should follow the shipment requirements and internal procedures.

 

Is One Logger Enough for a 20-Foot or 40-Foot Container?

 

There is no universal answer.

 

It depends on:

 

Cargo type

 

Product sensitivity

 

Container size

 

Cargo arrangement

 

Monitoring objective

 

Customer requirements

 

Internal QA procedures

 

For basic shipment monitoring, a company may choose one logger.

 

For higher-value shipments or temperature-distribution investigations, multiple loggers may provide substantially more information.

 

Example: One Logger vs Three Loggers

 

Imagine a reefer shipment monitored with only one logger in the middle.

 

The data shows stable temperature.

 

The company might conclude that the entire load experienced similar conditions.

 

Now imagine three loggers were used.

 

Results show:

 

Front Logger: Stable

 

Middle Logger: Stable

 

Rear Logger: Repeated temperature increases

 

The additional monitoring points reveal information that one logger could have missed.

 

Logger Placement for Seafood

 

For seafood shipments, the monitoring position should reflect the company's objective.

 

A seafood exporter may want to monitor:

 

Selected cartons

 

Selected pallets

 

Different areas of a reefer container

 

Conditions during transportation

 

For high-value export shipments, several loggers can provide additional visibility.

 

Logger Placement for Frozen Food

 

Frozen-food shipments may involve tightly packed cartons and pallets.

 

Airflow and cargo arrangement can affect temperature distribution.

 

The monitoring plan may therefore consider:

 

Pallet location

 

Position within the load

 

Distance from doors

 

Distance from refrigeration airflow

 

The correct strategy depends on the product and transportation process.

 

Logger Placement for Fresh Produce

 

Fresh fruits and vegetables can have different monitoring requirements depending on the produce, packaging and transportation method.

 

A logger may travel with:

 

Fruit cartons

 

Vegetable boxes

 

Pallets

 

Reefer shipments

 

For agricultural exports, documenting the logger location can be especially helpful when interpreting the data after a long journey.

 

Logger Placement for Pharmaceutical Shipments

 

Pharmaceutical and healthcare monitoring may have defined procedures for logger positioning.

 

These requirements should be followed rather than choosing a location arbitrarily.

 

Before using any logger, confirm that its specifications and placement method satisfy the relevant product, QA and regulatory requirements.

 

Don't Place the Logger Without Recording Its Location

 

This is a simple but important practice.

 

If multiple loggers are used, label them clearly.

 

For example:

 

Logger 01 — Front Pallet

 

Logger 02 — Middle Pallet

 

Logger 03 — Rear Pallet

 

When the data is reviewed later, the temperature history can then be linked to a specific location.

 

Without this information, comparing multiple logger records becomes much less useful.

 

Should the Logger Touch the Product?

 

This depends on what you are trying to monitor and the applicable procedure.

 

A logger records the temperature at its sensing location.

 

Ambient air temperature and actual product temperature are not necessarily identical.

 

Products with significant thermal mass may change temperature more slowly than surrounding air.

 

Therefore, avoid assuming that a logger reading automatically equals the internal temperature of the product.

 

Avoid Unrepresentative Locations

 

Potential placement mistakes include positioning the logger:

 

Directly against an unusual heat source

 

Directly in refrigeration airflow when cargo conditions are the target

 

Where it can easily fall out

 

Where it may be damaged

 

Where the customer cannot retrieve it

 

In a location unrelated to the monitoring objective

 

Good placement begins with a clearly defined measurement purpose.

 

Remember to Tell the Customer Where It Is

 

Disposable shipment loggers travel with the cargo.

 

When the shipment arrives, the customer needs to find the logger.

 

Include its location in the shipment documentation or inform the receiving team.

 

Otherwise, a small logger may accidentally be discarded together with packaging.

 

Using Azovtes AE-UT

 

The Azovtes AE-UT is a disposable temperature data logger with USB data access.

 

It can travel together with suitable cold-chain shipments and provide historical temperature records at the selected monitoring location.

 

Using Azovtes AE-BUT

 

The Azovtes AE-BUT adds Bluetooth connectivity for compatible mobile access.

 

This can provide additional convenience for logistics, warehouse and receiving personnel.

 

Regardless of the model selected, correct logger placement remains essential.

 

How Many Loggers Should You Buy?

 

Instead of asking only:

 

“How many cartons do I have?”

 

consider:

 

“How many temperature locations do I need to understand?”

 

A small shipment may require only one monitoring point.

 

A large, valuable or sensitive shipment may justify several.

 

The correct quantity depends on the monitoring objective rather than a fixed universal rule.

 

Need Help Planning Your Temperature Monitoring?

 

MTM Precision supplies temperature data loggers for food, seafood, pharmaceutical, fresh produce, cold-chain logistics and export applications.

 

For suitable one-way shipment monitoring, the Azovtes AE-UT and AE-BUT provide disposable temperature-recording solutions.

 

Tell us:

 

What are you transporting?

How large is the shipment?

Carton, pallet, truck or reefer container?

How long is the journey?

What temperature conditions are required?

What part of the shipment do you want to monitor?

 

We can help you determine the type and quantity of temperature loggers appropriate for your monitoring plan.

 

Contact MTM Precision

 

MTM Precision Sdn Bhd

 

Showroom & Service Centre:

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia.

 

Website: www.mtmpre.com.my

WhatsApp: +6016-660 7346

Email: mtmpre@yahoo.com


 

23 Aug 2026