Noyafa NF-983 Multi-Function OTDR Fiber & Network Cable Tester Malaysia
Noyafa NF-983 Multi-Function OTDR Fiber & Network Cable Tester Malaysia
The Noyafa NF-983 is a multi-function OTDR tester designed for technicians who work with both optical fiber and Ethernet network cabling.
Instead of carrying separate instruments for fiber fault detection, optical power measurement, visual fault location and basic network cable diagnostics, the NF-983 combines multiple essential testing functions into one portable instrument.
It is suitable for fiber optic installation, network maintenance, telecom work, CCTV network installation, data communication systems and field troubleshooting in Malaysia.
What Is the Noyafa NF-983?
The Noyafa NF-983 combines optical fiber and network cable testing functions in a single handheld tester.
Its key capabilities include:
Auto OTDR testing
1310nm / 1550nm dual-wavelength OTDR
Optical Power Meter (OPM)
10mW Visual Fault Locator (VFL)
UTP network cable testing
Network cable length measurement
IP Scan
Ping testing
4-inch IPS touchscreen
Rechargeable 4000mAh lithium battery
This makes the NF-983 especially useful for technicians who regularly move between fiber optic and RJ45 network troubleshooting jobs.
Auto OTDR Testing
One of the main features of the NF-983 is its Auto OTDR mode.
OTDR testing helps technicians identify events and problems along an optical fiber link.
According to Noyafa, the automatic OTDR function can automatically configure parameters such as pulse width and measurement duration, helping simplify testing for field technicians.
The NF-983 supports the commonly used:
1310nm and 1550nm wavelengths.
This makes it suitable for many single-mode fiber installation and maintenance applications.
Optical Power Meter
An Optical Power Meter is also integrated into the NF-983.
It supports multiple calibrated wavelengths, including:
850nm
1300nm
1310nm
1490nm
1550nm
1625nm
The OPM can be used for optical power testing and relative fiber-link loss measurements.
This allows technicians to perform several fiber diagnostic procedures without changing to another handheld instrument.
10mW Visual Fault Locator
The built-in 650nm 10mW VFL produces visible red laser light that can help technicians identify fiber bending, breaks and other physical faults.
Noyafa specifies a VFL test range of up to 8 km under suitable conditions.
For short-distance troubleshooting, patch cord inspection and fiber identification, this is a particularly convenient addition.
RJ45 Network Cable Testing
The NF-983 is not limited to optical fiber.
It can also test UTP network cabling and display connection information directly on its screen.
The tester can assist with identifying faults occurring around the near, middle or far sections of an RJ45 cable and also supports shielded cable testing.
This makes the NF-983 useful for technicians responsible for both the fiber backbone and copper Ethernet infrastructure of a site.
Network Cable Length Measurement
Another useful feature is network cable length measurement.
The NF-983 is specified for network cable length measurement of up to 3 km.
For installation and troubleshooting work, knowing the approximate cable length or fault position can significantly reduce the amount of time spent physically tracing long cable runs.
IP Scan and Ping
The NF-983 also provides IP Scan and Ping functions.
These functions help network technicians perform basic IP network diagnostics after checking the physical cabling.
For example, a technician can investigate whether a problem originates from:
Fiber → Network Cable → Physical Connection → IP Network
using one multifunction tester.
4-Inch Touchscreen
The NF-983 uses a 4-inch IPS touchscreen with 800 × 480 resolution.
The larger graphical display is particularly useful for OTDR work because technicians need to interpret test information and fiber events clearly while working in the field.
Battery for Field Work
The tester has a built-in 3.7V 4000mAh rechargeable lithium battery.
Noyafa specifies approximately 3 hours charging time and up to 6 hours of normal operation.
USB Type-C 5V/2A charging is supported.
A built-in LED flashlight is also provided for technicians working inside cabinets, equipment rooms and other poorly illuminated locations.
Who Should Use the Noyafa NF-983?
The NF-983 is particularly suitable for:
Fiber optic installers
Network technicians
Telecom contractors
CCTV installers
Data communication contractors
Building maintenance teams
IT infrastructure technicians
Fiber maintenance contractors
Network troubleshooting teams
It is especially attractive for technicians who frequently need to troubleshoot both fiber optic and copper Ethernet networks.
Why Choose a Multi-Function OTDR?
A traditional workflow may require technicians to carry several individual testers.
For example:
OTDR + Optical Power Meter + VFL + Network Cable Tester + Cable Length Tester + Network Diagnostic Tool
The NF-983 integrates many of these functions into one portable platform.
The biggest advantage is therefore not simply the number of functions.
It is the ability to troubleshoot more of the communication link using one instrument in the field.
Noyafa NF-983 Malaysia
For Malaysian contractors working on fiber optic networks, CCTV systems, structured cabling, commercial buildings, factories, data communication infrastructure and network maintenance, the Noyafa NF-983 provides a practical combination of fiber and Ethernet testing capabilities.
For product availability, quotation or technical information on the Noyafa NF-983 Multi-Function OTDR Tester in Malaysia, contact MTM Precision.
Contact MTM Precision
MTM Precision Sdn Bhd
No. 29-1 & 29-2, Jalan Bandar 18
Pusat Bandar Puchong
47160 Puchong, Selangor, Malaysia
Website: www.mtmpre.com.my
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Contact MTM Precision for Noyafa NF-983 OTDR tester enquiries, quotations and fiber/network testing equipment in Malaysia.
24 Aug 2026