Noyafa NF-983 Review: Is This Multi-Function OTDR Worth Buying Malaysia
Noyafa NF-983 Review: Is This Multi-Function OTDR Worth Buying Malaysia
Is the Noyafa NF-983 Multi-Function OTDR Tester worth buying?
For the right user, its main attraction is straightforward:
It is not only an OTDR.
The NF-983 combines fiber optic testing, copper network cable testing and basic IP network diagnostics in one portable tester.
This makes it particularly interesting for technicians whose troubleshooting work follows a path such as:
Fiber Backbone → Network Switch → Cat5e/Cat6 → IP Device
Instead of carrying several separate basic instruments, the technician can perform multiple diagnostic tasks using one platform.
However, that does not mean the NF-983 is the correct OTDR for everyone.
Professional telecom, certification and specialized fiber applications may require higher-end dedicated equipment.
This review explains where the NF-983 makes sense and where you should consider another type of tester.
Noyafa NF-983 at a Glance
The NF-983 combines functions including:
1310nm / 1550nm Auto OTDR
Optical Power Meter
650nm 10mW Visual Fault Locator
UTP cable testing
Network cable length measurement
IP Scan
Ping
This combination gives the NF-983 its main selling point:
Fiber + Ethernet + IP troubleshooting in one tester.
What Is the NF-983 Designed For?
The NF-983 is primarily relevant to field technicians involved in:
Fiber installation
Fiber troubleshooting
CCTV installation
Network cabling
Factory maintenance
Building maintenance
Structured cabling
IT field support
It is especially useful when the technician cannot assume that every network failure is caused by the fiber.
Why This Matters
Consider a typical modern network:
Server Room
↓
Fiber Backbone
↓
Remote Network Switch
↓
Cat6
↓
IP Camera
The camera goes offline.
Where is the problem?
It could be:
Fiber
Connector
Splice
Remote switch
Cat6 cable
RJ45 termination
IP configuration
Camera
An OTDR alone only investigates part of this chain.
The NF-983 is designed to let the technician continue troubleshooting beyond the fiber.
NF-983 OTDR Function
The NF-983 provides:
1310nm / 1550nm Auto OTDR
An OTDR can help technicians investigate:
Fiber length
Connector events
Splice events
Reflective events
High-loss events
Unexpected termination
Possible fiber breaks
One of its most useful outputs is event distance.
Instead of knowing only:
“The fiber is down.”
the technician may obtain:
“There is a major event approximately 1.4km from the test point.”
That can significantly narrow the physical search area.
Why 1310nm and 1550nm Are Useful
Both wavelengths are commonly used for single-mode fiber testing.
1310nm is widely used for general single-mode testing.
1550nm has lower intrinsic fiber attenuation and is generally more sensitive to bending-related loss.
Comparing traces at both wavelengths can therefore provide additional troubleshooting information.
For example:
1310nm → Small event
1550nm → Significantly greater loss at same distance
This may give the technician a reason to investigate excessive bending around that location.
Auto OTDR: Useful for General Technicians
Not every network technician is an OTDR specialist.
Manual OTDR configuration requires understanding parameters such as:
Test range
Pulse width
Wavelength
Measurement conditions
Auto OTDR simplifies routine measurements.
This is particularly useful for:
CCTV installers
Network technicians
Maintenance teams
However, automatic testing does not eliminate the need to understand basic OTDR interpretation.
NF-983 Optical Power Meter
The NF-983 includes an integrated Optical Power Meter supporting calibrated wavelengths including:
850nm
1300nm
1310nm
1490nm
1550nm
1625nm
This function answers a different question from OTDR.
OTDR: Where are the events?
OPM: How much optical power is present?
For troubleshooting, having both functions available can be useful.
Important Wavelength Clarification
Do not confuse OPM wavelengths with OTDR wavelengths.
The NF-983 OTDR operates at:
1310nm / 1550nm
Its OPM supports additional calibrated wavelengths.
Therefore, OPM support for 850nm does not mean the instrument provides an 850nm OTDR function.
This distinction is important when comparing fiber testers.
NF-983 Visual Fault Locator
The NF-983 incorporates a:
650nm 10mW Visual Fault Locator
A VFL can assist with:
Fiber identification
Continuity checks
Patch cord inspection
Certain accessible fiber breaks
Certain severe bends
For simple accessible faults, the VFL can sometimes provide a faster physical clue than OTDR analysis alone.
OTDR + VFL Workflow
A practical workflow may be:
OTDR
↓
Identify approximate event distance
↓
Reach suspected location
↓
Use VFL / physical inspection where appropriate
↓
Repair
↓
Retest
This demonstrates why OTDR and VFL complement each other.
NF-983 UTP Cable Testing
This is where the NF-983 becomes more interesting for network and CCTV technicians.
After the fiber backbone reaches a remote switch, the network usually continues through copper Ethernet.
For example:
Fiber → Switch → Cat6 → Camera
The NF-983 provides UTP cable testing to help technicians investigate the copper section.
This can help identify common wiring problems before replacing the connected device.
Network Cable Length Measurement
The NF-983 also provides network cable length measurement.
Noyafa specifies network cable length measurement up to 3 km.
Length information can be useful when investigating undocumented or unfamiliar cable routes.
As with any field measurement, results should be interpreted according to cable type and test conditions.
NF-983 IP Scan
Physical cabling can be perfectly good while the network still does not operate correctly.
The NF-983 includes IP Scan to assist with basic identification of devices visible on the connected network.
This can be useful during:
CCTV troubleshooting
Network installation
Building maintenance
Factory maintenance
It extends troubleshooting beyond physical cable testing.
NF-983 Ping
The tester also provides Ping.
A technician can use Ping for basic reachability checks involving devices such as:
Network switches
Routers
IP cameras
Other network devices
For example:
Remote switch responds to Ping
but
IP camera does not
The investigation can move closer to the camera rather than continuing to blame the fiber backbone.
Where NF-983 Is Strongest: CCTV
CCTV is one of the strongest applications for this type of tester.
Modern CCTV systems increasingly combine:
Fiber + Ethernet + IP
Suppose 20 cameras connected to one remote switch suddenly disappear.
The technician can investigate:
Remote switch
↓
Optical power
↓
OTDR
↓
VFL where appropriate
↓
UTP
↓
IP Scan
↓
Ping
This is a much broader troubleshooting workflow than a basic RJ45 tester can provide.
Example: CCTV Fiber Failure
Architecture:
NVR Room → 2km Fiber → Remote Switch → 16 Cameras
All 16 cameras go offline.
The OTDR shows a major event at approximately:
1.35km
The site drawing shows an outdoor fiber enclosure around that distance.
The contractor can prioritize that area rather than checking 16 cameras individually.
This is the practical value of OTDR distance information.
Where NF-983 Is Strong: Factory Maintenance
Factories increasingly depend on fiber for:
Building networks
CCTV
Warehouses
Remote offices
Access control
IT infrastructure
When a remote building loses communication, maintenance personnel need to determine quickly whether the fault is:
Fiber
or
Downstream Network
A multi-function tester is well suited to this fault-isolation role.
Example: Factory Network Failure
A production building loses network connectivity.
OTDR testing shows the fiber backbone appears normal.
The technician then checks:
Remote Cat6 cable → Good
IP Scan → Device detected
Ping → Remote switch responds
The investigation can now move toward the affected equipment or network configuration.
Without this structured process, technicians may waste time repeatedly checking a healthy fiber backbone.
Where NF-983 Is Strong: Building Maintenance
Large buildings may contain:
Fiber risers
Telecom rooms
CCTV
Access control
Wi-Fi
Ethernet cabling
Facility teams may therefore encounter several types of network faults.
The NF-983 provides a useful first-line troubleshooting platform for these mixed environments.
Where NF-983 Is Strong: Network Contractors
Traditional network contractors who previously worked mainly with Cat5e and Cat6 increasingly encounter fiber backbones.
A standard network cable tester cannot locate events along a fiber link.
Adding OTDR capability allows the contractor to handle a broader range of installation and maintenance work.
Who Should Consider Buying the NF-983?
The NF-983 is particularly suitable for:
CCTV Contractors
Especially those installing fiber-connected remote camera zones.
Network Contractors
Especially contractors handling both fiber backbone and copper distribution.
Factory Maintenance Teams
For first-line troubleshooting of industrial network infrastructure.
Building Maintenance Teams
For mixed fiber and Ethernet systems.
IT Field Technicians
Where troubleshooting extends beyond a standard LAN cable test.
Fiber Installers
For general installation and fault-location work where the NF-983's OTDR specifications match the application.
Who May Need Something More Advanced?
The NF-983 should not be positioned as the perfect OTDR for every fiber professional.
Consider higher-end dedicated equipment when your work requires:
Long-haul telecom characterization
Very high dynamic range
Very low dead zones
Advanced event analysis
Detailed professional reporting
Specialized certification
Contractually specified test equipment
In these applications, optical performance and certification capability may matter more than multifunction convenience.
NF-983 vs Dedicated Professional OTDR
A dedicated professional OTDR may provide stronger specialized fiber capabilities.
The NF-983's advantage is different:
Versatility.
For a technician whose workday may involve:
Fiber fault at 9:00am
Cat6 problem at 11:00am
CCTV IP issue at 2:00pm
a multi-function tester can be more practical than a fiber-only instrument.
NF-983 vs Basic Network Cable Tester
A basic RJ45 tester can be excellent for copper network work.
But it cannot perform OTDR fault location on a fiber backbone.
If your projects increasingly contain:
Fiber → Switch → Ethernet
then a multi-function OTDR expands the range of faults you can investigate.
NF-983 vs Separate OTDR + OPM + VFL + RJ45 Tester
Buying separate instruments has advantages.
You can select the best instrument for each task.
It may be preferable for specialized professionals.
However, the technician must carry and manage several devices.
The NF-983 takes the opposite approach:
One portable platform for several common field tests.
The better choice depends on how specialized your work is.
What We Like About the NF-983 Concept
The strongest points are:
1. Fiber + Network Integration
It addresses the real architecture of modern networks rather than treating fiber as an isolated cable.
2. Dual-Wavelength Auto OTDR
1310nm and 1550nm cover common single-mode troubleshooting requirements.
3. Integrated OPM
Useful for optical power checks without immediately reaching for another instrument.
4. Integrated VFL
Convenient for fiber identification and certain accessible physical faults.
5. UTP Testing
Very relevant after the fiber reaches a network switch.
6. IP Scan + Ping
Allows basic troubleshooting to continue into the IP layer.
What Buyers Should Consider Carefully
Before purchasing, confirm:
Fiber Type
Are you primarily testing single-mode fiber?
Fiber Distance
Does the OTDR capability match your normal links?
Required Dynamic Range
Is it sufficient for your application?
Dead-Zone Requirements
Are you testing short links or closely spaced events?
Certification Requirements
Does your project require approved certification equipment?
Reporting Requirements
Do you require advanced professional reports?
Do not purchase based only on the number of functions.
Do You Need a Launch Fiber?
For proper evaluation of the first connector and more complete OTDR testing, a suitable launch fiber is highly useful.
A typical arrangement is:
OTDR → Launch Fiber → Link Under Test
A receive fiber can also be used when evaluation of the far-end connector is required.
Buyers should budget for the correct accessories, not only the tester itself.
Do You Need Fiber Cleaning Equipment?
Yes, if you perform professional fiber work.
A good fiber troubleshooting kit should also consider:
Connector cleaning tools
Fiber inspection equipment
Appropriate adapters
Patch cords
Launch fiber
Dirty connectors can create loss and misleading troubleshooting results.
Is NF-983 Good for Beginners?
Its Auto OTDR function makes routine operation more approachable.
But beginners should still learn:
OTDR trace basics
Reflective vs non-reflective events
Fiber attenuation
Dead zones
Launch fiber
1310nm vs 1550nm
Connector cleanliness
An automatic tester is most useful when the technician understands what the result means.
Is NF-983 Worth Buying for an RJ45-Only Technician?
If you work exclusively with short copper Ethernet cables and never encounter fiber, probably not.
A dedicated network cable tester may provide better value.
The NF-983 becomes more attractive when fiber is becoming part of your work.
Is NF-983 Worth Buying for a Fiber-Only Specialist?
Possibly, depending on your requirements.
If your priority is advanced professional OTDR performance, compare it against dedicated OTDR models based on technical specifications rather than multifunction capability.
If you also handle network and IP troubleshooting, the additional functions become much more valuable.
Is NF-983 Worth Buying for CCTV Contractors?
This is one of its strongest use cases.
CCTV contractors increasingly work with:
Fiber Backbone + Ethernet + IP Cameras
That architecture closely matches the NF-983's combination of testing functions.
Is NF-983 Worth Buying for Factory Maintenance?
For factories with multiple fiber-connected buildings, CCTV networks or remote network cabinets, the NF-983 can provide a practical first-line diagnostic platform.
The value is not only finding fiber faults.
It is determining:
Which part of the network should we investigate next?
That can help reduce troubleshooting time.
Final Verdict: Is Noyafa NF-983 Worth Buying?
The Noyafa NF-983 makes the most sense when your work crosses three areas:
Fiber
Ethernet
IP
If you only need advanced OTDR analysis, a specialized professional OTDR may be the better investment.
If you only test RJ45 cables, a simpler network tester may be sufficient.
But if your daily troubleshooting involves:
Fiber Backbone → Network Switch → Cat6 → IP Device
then the NF-983's multi-function design becomes much more compelling.
Its strongest value is not one individual function.
Its strongest value is the ability to troubleshoot several layers of the network using one portable platform.
Noyafa NF-983 Review Malaysia
For CCTV contractors, network installers, factory maintenance teams, building maintenance technicians and general fiber installers in Malaysia, the Noyafa NF-983 Multi-Function OTDR Tester provides a practical combination of:
1310/1550nm Auto OTDR
Optical Power Meter
650nm 10mW VFL
UTP Cable Testing
Network Cable Length Measurement
IP Scan
Ping
Choose it when versatility and field troubleshooting convenience are important.
Choose a more specialized platform when your project demands advanced fiber certification or high-end OTDR performance.
For specifications, availability and quotation in Malaysia, contact MTM Precision.
Contact MTM Precision
MTM Precision Sdn Bhd
No. 29-1 & 29-2, Jalan Bandar 18
Pusat Bandar Puchong
47160 Puchong, Selangor, Malaysia
Website: www.mtmpre.com.my
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Contact MTM Precision for Noyafa NF-983, OTDR testers, fiber optic test equipment, CCTV network testers and fiber/network troubleshooting instruments in Malaysia.
24 Aug 2026