Where to Buy NOVKER NK100 & NK120 Visual Fault Locator Malaysia
Where to Buy NOVKER NK100 & NK120 Visual Fault Locator Malaysia
Looking for a NOVKER Visual Fault Locator in Malaysia for fiber optic installation, CCTV networking or maintenance work?
The NOVKER NK100 and NOVKER NK120 are compact VFL options designed for basic fiber tracing, continuity checking and visual troubleshooting.
The main difference is straightforward:
NOVKER NK100 — 10mW, Dry Battery
NOVKER NK120 — 15mW, Lithium Battery
Customers can contact MTM Precision Sdn. Bhd. in Puchong, Selangor for NOVKER NK100 and NK120 enquiries, model selection and quotation in Malaysia.
NOVKER NK100 Visual Fault Locator Malaysia
The NOVKER NK100 is the more basic model in this two-model range.
Key configuration:
Model: NK100
Product: Visual Fault Locator
Specified Output: 10mW
Power: Dry Battery
The NK100 is suitable for technicians who need a straightforward VFL for basic fiber optic work.
Typical applications include fiber continuity checking, fiber identification, patch-cord troubleshooting and checking certain accessible physical fiber faults.
For network or CCTV technicians who only occasionally encounter fiber, the NK100 provides a practical entry point into fiber troubleshooting equipment.
NOVKER NK120 Visual Fault Locator Malaysia
The NOVKER NK120 provides a higher specified VFL output with a different battery configuration.
Key configuration:
Model: NK120
Product: Visual Fault Locator
Specified Output: 15mW
Power: Lithium Battery
The NK120 can be considered by technicians who perform fiber work more regularly or prefer a lithium-battery VFL.
It performs the same general category of visual troubleshooting as the NK100, including fiber tracing, continuity checking and investigation of certain accessible physical faults.
NK100 vs NK120 – Which Should You Buy?
| Feature | NOVKER NK100 | NOVKER NK120 |
|---|---|---|
| Product Type | Visual Fault Locator | Visual Fault Locator |
| Specified Output | 10mW | 15mW |
| Power | Dry Battery | Lithium Battery |
| Fiber Continuity Check | Yes | Yes |
| Fiber Identification | Yes | Yes |
| Visual Fault Checking | Yes | Yes |
| Positioning | Basic / Entry-Level | Higher-Spec Option |
For occasional basic fiber work, the NK100 can be sufficient.
For technicians who prefer a 15mW lithium-battery configuration, the NK120 can be considered.
The higher mW specification should not be interpreted as a guaranteed fault-detection distance. Actual visibility depends on the fiber, cable construction, fault type and working environment.
Who Should Buy a Visual Fault Locator?
The NK100 and NK120 are relevant to several groups of technical users.
CCTV Installers
Modern CCTV projects may use fiber between remote buildings, guardhouses, warehouses and main control rooms.
A VFL gives CCTV technicians a basic method for checking the fiber portion of the system.
Network Contractors
Network installers working with both Ethernet and fiber can keep a VFL in their field toolkit for quick fiber tracing and troubleshooting.
Fiber Technicians
Even technicians who already use more advanced fiber instruments can benefit from having a compact VFL available for straightforward visual checks.
IT Maintenance Teams
Companies with internal fiber infrastructure may keep a VFL for preliminary troubleshooting before arranging more advanced testing.
Factory Maintenance Departments
Factories increasingly use fiber between production buildings, server rooms, control rooms and security systems.
A VFL can provide maintenance personnel with basic first-line fiber checking capability.
What Can You Check with NK100 or NK120?
A VFL introduces visible red laser light into an optical fiber.
This can assist technicians with fiber identification and continuity checking.
In suitable accessible conditions, it may also help reveal certain physical problems such as a fiber break or severe bend.
However, not every fiber fault will produce visible red-light leakage.
Cable construction, fiber type, fault condition, ambient lighting and accessibility can all affect what the technician can see.
Therefore, the NK100 and NK120 should be treated as visual troubleshooting tools, not complete fiber diagnostic systems.
Does a VFL Measure Optical Power?
No.
If the job requires optical power measurement, an Optical Power Meter is required.
NOVKER users can consider the NK200 Optical Power Meter together with the NK100 or NK120.
A basic combination can therefore be:
NK100 + NK200
or
NK120 + NK200
The VFL provides visual checking while the NK200 adds optical power measurement.
What If I Need to Know the Distance to a Fiber Fault?
A VFL does not provide OTDR-style distance information.
If a technician needs to investigate an event somewhere along a long fiber link and determine its approximate location, an OTDR may be required.
A broader troubleshooting toolkit can therefore include:
VFL → Visual checking
Optical Power Meter → Optical measurement
Fiber Identifier → Fiber identification
OTDR → Advanced event and distance analysis
Selecting the correct tester depends on the problem being investigated.
NOVKER NK200 and NK420 Malaysia
Customers buying an NK100 or NK120 may also consider other NOVKER fiber testing instruments.
The NOVKER NK200 Optical Power Meter adds optical measurement capability.
The NOVKER NK420 Fiber Identifier provides another specialized tool for technicians working with fiber infrastructure.
Together with a suitable Pocket OTDR, these products allow contractors to build their fiber toolkit progressively instead of purchasing everything at once.
Buying for a CCTV Company?
If your company mainly installs CCTV and only occasionally handles fiber, you can start with a simpler toolkit.
For example:
NOVKER NK100 + NK200
This provides basic visual checking plus optical power measurement.
As the number of fiber jobs grows, additional equipment such as a Fiber Identifier or OTDR can be considered.
Buying for a Network Contractor?
Network contractors who regularly install fiber can consider the NK120 together with additional fiber testing equipment.
For example:
NK120 VFL → Visual checking
NK200 OPM → Optical power measurement
NK420 → Fiber identification
Pocket OTDR → More advanced troubleshooting
The final combination should depend on the type of network projects your company handles.
Why Buy from a Local Supplier in Malaysia?
For technical instruments, purchasing is not only about finding a product listing.
Customers may also need help deciding:
Which model is suitable?
Do I need 10mW or 15mW?
Do I need a VFL or Optical Power Meter?
Should I add a Fiber Identifier?
Is an OTDR necessary for my application?
MTM Precision can assist customers with product selection according to the actual fiber testing requirement.
Customers can also visit the MTM Precision Showroom & Service Centre in Puchong, Selangor for enquiries.
NOVKER Visual Fault Locator Puchong, Selangor
For customers in the Klang Valley, MTM Precision is located in Pusat Bandar Puchong.
This is convenient for customers from areas including:
Puchong, Subang Jaya, Shah Alam, Petaling Jaya, Kuala Lumpur, Cyberjaya, Putrajaya, Klang, Seri Kembangan and surrounding areas.
Customers outside the Klang Valley can contact MTM Precision directly for product enquiries and quotation.
NOVKER Fiber Testing Equipment Across Malaysia
MTM Precision serves customers throughout Malaysia, including Selangor, Kuala Lumpur, Johor, Penang, Melaka, Negeri Sembilan, Perak, Pahang, Kedah, Perlis, Kelantan, Terengganu, Sabah and Sarawak.
Whether you are a CCTV installer, network contractor, fiber technician or maintenance department, you can enquire according to your actual application.
Important VFL Laser Safety
NOVKER NK100 and NK120 produce laser light.
Never look directly into the VFL output port.
Never look into the end of a connected fiber while the VFL is operating.
Never point the laser toward another person's eyes.
Always follow the manufacturer's operating instructions and appropriate laser-safety practices.
Buy NOVKER NK100 & NK120 Visual Fault Locator Malaysia
For NOVKER Visual Fault Locator enquiries in Malaysia, customers can contact MTM Precision for:
NOVKER NK100 — 10mW Visual Fault Locator
NOVKER NK120 — 15mW Visual Fault Locator
NOVKER NK200 — Optical Power Meter
NOVKER NK420 — Fiber Identifier
Pocket OTDR — Fiber Optic Troubleshooting
If you are unsure which instrument is appropriate, explain your application to our team—for example CCTV fiber troubleshooting, building network maintenance, fiber installation, patch-cord checking or factory network maintenance—so that the suitable instrument category can be considered.
Contact MTM Precision
MTM Precision Sdn. Bhd. (744811-A)
Telephone: +603-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com / enquiry@mtmpre.com.my
Website: www.mtmpre.com.my
Showroom & Service Centre:
No. 29-1 & 29-2, Jalan Bandar Lapan Belas,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Looking for NOVKER NK100 or NK120 Visual Fault Locator in Malaysia? Contact MTM Precision for model selection, quotation and related fiber optic testing equipment.
17 Sep 2026
