How to Clean Store and Maintain Myzox EW-BK Electronic Whistle Malaysia
Myzox does not state an ingress-protection or waterproof rating in the published EW-BK specifications. Therefore, users should not assume that the electronic whistle is waterproof.
## Inspect the Whistle After Use
At the end of a shift or activity, visually inspect:
- Whistle button
- Peep and Beep selector switch
- Sound opening
- Plastic housing
- Battery compartment
- Carrying strap
Look for mud, dust, cracks, impact damage, loose parts or signs of moisture.
If the whistle has been dropped or exposed to rain, test it in a safe location before returning it to operational use.
## How to Clean the Exterior
Because the EW-BK does not require mouth contact, normal cleaning is mainly focused on the exterior surfaces handled by the user.
A practical cleaning process is:
1. Stop using the whistle.
2. Remove loose dust with a clean, soft cloth.
3. Wipe the casing carefully with a slightly damp cloth.
4. Clean around the button and selector without forcing liquid into the openings.
5. Dry the exterior completely.
6. Test both sound modes before the next use.
Do not immerse the whistle in water. Avoid spraying cleaning liquid directly onto the unit unless the manufacturer’s instructions specifically permit it.
Strong solvents or abrasive materials may damage the plastic body, printed markings or controls.
## Do Not Block the Sound Opening
Dust, mud or debris around the sound opening may affect the whistle’s output.
If contamination is visible:
- Use a dry, soft brush or cloth
- Avoid inserting sharp objects into the opening
- Do not blow compressed air at excessive pressure
- Do not pour water into the unit
- Do not dismantle the internal sound mechanism
If the whistle remains weak after cleaning and installing fresh batteries, remove it from safety-related use and contact the supplier.
## Protect It from Rain and Moisture
Malaysia’s outdoor work conditions may include sudden rain, high humidity and wet storage areas.
Since no waterproof rating is stated for the EW-BK, take reasonable precautions:
- Keep it under suitable cover during rain
- Avoid placing it on wet surfaces
- Dry the exterior promptly after light moisture exposure
- Do not return a damp unit directly to a closed bag
- Store it separately from wet PPE or surveying equipment
- Inspect the battery compartment if moisture entry is suspected
If water has entered the unit, stop using it. Do not depend on it for traffic control, machinery movement or emergency signalling until its operation is confirmed.
## Avoid Excessive Heat
Do not leave the EW-BK for extended periods in locations exposed to excessive heat, such as:
- Vehicle dashboards
- Closed vehicles under direct sunlight
- Areas beside hot machinery
- Unventilated metal storage boxes
- Direct outdoor sunlight
Excessive heat can affect batteries, plastic components and electronic equipment.
Store the whistle in a dry, shaded location when it is not in use.
## Check the Four CR2032 Batteries
The Myzox EW-BK requires **four CR2032 batteries**. Trial batteries are included with a new unit, but their remaining operating life may vary.
Replace the batteries when:
- Sound output becomes weaker
- Operation becomes intermittent
- The whistle does not activate consistently
- The unit will be prepared for an important project or event
- Battery leakage or damage is observed
Replace all four batteries together using a matching set. Follow the polarity markings and manufacturer’s instructions.
## Coin-Cell Battery Safety
CR2032 batteries are small and can cause serious injury if swallowed.
Always:
- Keep new and used batteries away from children
- Store spare batteries in suitable packaging
- Prevent batteries from contacting loose metal objects
- Do not short-circuit, heat or dismantle batteries
- Remove leaking batteries carefully according to safety guidance
- Dispose of used batteries through an appropriate collection channel
Do not keep loose CR2032 batteries in a pocket, toolbox compartment or bag where they may contact coins, keys or tools.
## Storage Between Projects
For short-term storage:
- Clean and dry the whistle
- Confirm that the button is not held down
- Keep it away from moisture and direct sunlight
- Store it where authorised personnel can locate it
- Record the unit’s assigned user or department
For longer periods, consult the instruction manual regarding battery removal and storage. Before returning the whistle to service, inspect it and test both sound modes.
## Maintain a Simple Inspection Record
Companies managing several EW-BK units can use a basic log containing:
- Unit identification number
- Assigned person or department
- Inspection date
- Battery replacement date
- Condition of casing and strap
- Peep and Beep test result
- Action taken for defective units
This is especially useful for construction sites, factories, warehouses and emergency-equipment stores.
## Pre-Use Check Before Every Shift
Before relying on the EW-BK:
1. Inspect the body and strap.
2. Press the whistle button.
3. Test both Peep and Beep tones.
4. Listen for normal, consistent output.
5. Confirm that spare batteries are available.
6. Verify the approved backup communication method.
The EW-BK has a rated output of **125 dB**. Do not test it close to another person’s ears.
## Proper Care for Malaysian Working Conditions
The **Myzox EW-BK Electronic Whistle** is a compact signalling device for construction, surveying, roadwork, warehouse, sports and emergency applications.
Careful cleaning, dry storage and regular battery testing are particularly important in the humid and rainy working conditions found across **Selangor, Kuala Lumpur, Johor, Penang and other parts of Malaysia**.
Need operating information, replacement guidance or a new Myzox EW-BK electronic whistle? Contact MTM Precision in Puchong.
**MTM Precision Sdn Bhd**
**Showroom & Service Centre:** No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
**Tel:** 03-8080 7172
**WhatsApp:** +6016-660 7346
**Email:** mtmpre@yahoo.com
**Website:** www.mtmpre.com.my
21 Sep 2026