Can FNIRSI LPM-10A Replace a Fluke Cable Tester Malaysia?
Can FNIRSI LPM-10A Replace a Fluke Cable Tester Malaysia?
Can the FNIRSI LPM-10A replace a Fluke network cable tester?
For some everyday troubleshooting jobs, the LPM-10A may provide many of the practical functions a technician needs.
But if the question is:
Can the FNIRSI LPM-10A replace a professional cable certification tester?
The answer is:
No.
These instruments are designed for different levels of network testing.
Understanding the difference can prevent you from buying a tester that is either too basic or unnecessarily expensive for your actual work.
FNIRSI LPM-10A Feature Summary
| Function | Typical Use |
|---|---|
| Cable Tracing | Find and identify unknown Ethernet cables |
| Wire Map Testing | Check RJ45 wiring and connection faults |
| Cable Length Measurement | Check approximate installed cable length |
| PoE Detection | Check PoE information during troubleshooting |
| Port Flash | Help identify the corresponding network switch port |
| Network Speed Test | Assist with basic network connection troubleshooting |
| NCV Detection | Supplementary non-contact voltage checking |
| Colour Display | Easier viewing during field work |
These functions make the LPM-10A useful for installation, maintenance and troubleshooting.
That is different from formal cable certification.
First: What Do You Mean by “Fluke Cable Tester”?
This is important because “Fluke tester” can refer to different types of network testing equipment.
Some technicians use the term broadly to describe professional network cable testers.
But professional network testing equipment can serve different purposes, including:
Basic verification
Network troubleshooting
Qualification
Cable certification
These are not the same level of testing.
Therefore, the better question is:
What result do you need from the tester?
Verification vs Troubleshooting vs Certification
Think of network testing in three simplified levels.
Level 1 – Basic Verification
You want to know:
Is the RJ45 wiring correct?
Is there an open connection?
Is the cable connected properly?
A basic RJ45 tester may already be enough.
Level 2 – Installation & Troubleshooting
You want to know:
Which cable is this?
Where does it go?
Approximately how long is it?
Is PoE involved?
Which switch port is connected?
This is where a multifunction tester such as the FNIRSI LPM-10A becomes useful.
Level 3 – Professional Certification
You need to prove that an installed cabling link complies with required performance standards or project specifications.
This requires appropriate professional cable certification equipment.
The LPM-10A is not designed to replace that category.
When Is FNIRSI LPM-10A Enough?
For many everyday service jobs, formal certification is not the objective.
For example:
An office user reports:
“My LAN point doesn't work.”
You may need to:
Check the cable
Trace it to the network cabinet
Find the switch port
Investigate the network connection
You are troubleshooting a fault.
You are not necessarily certifying the entire structured cabling installation.
For this type of work, the LPM-10A can be much more relevant.
Example: IP Camera Offline
An IP camera stops working.
The customer wants the problem solved.
Your troubleshooting questions may be:
Is the camera cable connected?
Is the RJ45 wiring normal?
Which cable belongs to this camera?
Is PoE available?
Which switch port is involved?
These are practical field-service questions.
A multifunction network tester can help answer them without requiring a full cable-certification workflow.
Example: Unknown Office LAN Cable
You enter an old office.
There are 50 network cables inside the cabinet.
Several have no labels.
Your problem is:
“Which cable belongs to Meeting Room 2?”
This is primarily a cable identification and tracing problem.
A professional certification tester may have capabilities far beyond what is required for this particular task.
The LPM-10A is designed around more practical troubleshooting functions for situations like this.
Example: New Structured Cabling Project
Now consider a different situation.
A contractor installs a complete new structured cabling system.
The project specification requires proof that each installed link meets the required cabling performance standard.
This is no longer simple troubleshooting.
The customer may require formal test results or certification documentation.
In this situation:
Use the appropriate professional cable certification equipment.
The FNIRSI LPM-10A should not be presented as a replacement.
Wire Map PASS Does Not Mean Certified
This is one of the most important concepts to understand.
Suppose the tester shows that the conductors are connected correctly.
That is useful information.
But:
Correct wire map ≠ certified cable performance.
A cable can have correct conductor continuity while still having other performance issues that require more advanced testing.
Therefore, do not tell a customer:
“The cable passed certification.”
when you have only performed a basic wiring or troubleshooting test.
Cable Length Is Not Certification Either
The LPM-10A can provide cable length information.
This can be useful for:
Understanding cable routes
Checking existing installations
Comparing cable runs
Supporting troubleshooting
But measuring or estimating cable length is not the same as certifying the performance of the installed link.
Again:
Useful troubleshooting information ≠ formal certification.
What About Network Speed Testing?
Network speed-related testing can help technicians investigate connection problems.
For example:
One network point appears much slower than another.
You can compare connections and continue troubleshooting.
But this should not automatically be interpreted as structured-cabling certification.
Network performance can also be influenced by:
Switches
Routers
Network configuration
Connected devices
Traffic
Server performance
Other infrastructure
The physical cable is only one part of the network.
What About PoE Testing?
PoE testing is extremely useful for service work involving:
IP cameras
Wi-Fi access points
VoIP phones
Other PoE devices
But PoE troubleshooting and cable certification solve different problems.
A CCTV installer may care much more about:
Is PoE available?
than receiving a formal structured-cabling certification report.
Again, choose the tester according to the job.
LPM-10A vs Professional Cable Certifier
| Requirement | FNIRSI LPM-10A | Professional Cable Certifier |
|---|---|---|
| RJ45 troubleshooting | Yes | Possible, but may be more than required |
| Cable tracing | Useful | Depends on equipment/system |
| Cable length checking | Yes, for troubleshooting | Advanced testing depending on system |
| PoE troubleshooting | Useful | Depends on tester |
| Switch-port identification | Useful | Not the main reason to buy a certifier |
| Everyday CCTV / IT maintenance | Strong application | Often more equipment than necessary |
| Formal structured-cabling certification | No | Yes, with appropriate certification equipment |
| Project certification report | No | Use appropriate certifier |
This is why the two categories should not be compared only by price.
They solve different problems.
Why Is Professional Certification Equipment More Expensive?
Professional certification equipment is designed for a much more demanding purpose.
The user may need to:
Verify installed cabling against required standards
Generate formal test results
Document multiple installed links
Provide project handover evidence
Meet consultant or customer requirements
This is very different from finding an unknown CCTV cable inside a cabinet.
The equipment cost reflects the different job requirement.
Do CCTV Installers Need a Professional Certifier?
Not for every job.
A CCTV installer frequently needs to:
Terminate RJ45 connectors
Trace camera cables
Check PoE
Find switch ports
Troubleshoot offline cameras
For these daily jobs, a multifunction tester such as the LPM-10A may be more practical.
However, if the project contract specifically requires certified structured cabling results, appropriate certification equipment is still required.
Do Office IT Technicians Need a Professional Certifier?
Again, it depends on the work.
For daily IT support such as:
Dead LAN point
Unknown cable
Desk relocation
Switch-port identification
PoE AP troubleshooting
Network cabinet maintenance
the LPM-10A covers a very different type of workflow from a professional cable certifier.
If the IT team needs formal cable certification, then the equipment requirement changes.
Do Network Contractors Need Both?
Potentially, yes.
A network contractor may use a multifunction tester for everyday installation and troubleshooting.
Then use professional certification equipment when the project requires formal certification.
The two tools can complement each other.
Think of it as:
LPM-10A = practical field troubleshooting
Professional certifier = formal performance verification and certification
One does not automatically eliminate the need for the other.
Don't Buy More Tester Than You Need
Buying the most expensive instrument is not always the best decision.
If 90% of your work involves:
CCTV
Cable tracing
Office LAN troubleshooting
PoE
Network cabinet maintenance
then your everyday tool should match those jobs.
You may not need professional certification equipment for every service call.
Don't Buy Less Tester Than the Project Requires
The opposite mistake can be more serious.
If a project specifically requires formal cable certification, do not attempt to substitute a troubleshooting tester simply to reduce equipment cost.
Check:
Tender requirements
Consultant requirements
Customer specifications
Required cabling standards
Required test reports
before deciding what equipment is acceptable.
Who Should Consider FNIRSI LPM-10A?
The LPM-10A is particularly relevant for:
CCTV installers
IT technicians
Network maintenance teams
Building maintenance
Factory maintenance
Network contractors
Field service technicians
Technicians maintaining existing buildings
especially when the job involves practical cable identification and fault finding.
Who Needs Professional Cable Certification Equipment?
Consider professional certification equipment when the job specifically requires:
Formal structured-cabling certification
Compliance verification
Professional project handover reports
Testing against specified cabling standards
The exact equipment should be selected according to the project requirement.
The Most Important Buying Question
Before buying any network tester, ask:
“What result must I deliver to my customer?”
If the answer is:
“Find the fault and restore the network.”
a multifunction troubleshooting tester may be appropriate.
If the answer is:
“Provide formal certification that this installed cabling meets the required standard.”
you need appropriate professional certification equipment.
That one question can prevent the wrong purchase.
FNIRSI LPM-10A vs Fluke Cable Tester Malaysia
The FNIRSI LPM-10A should not be marketed as a replacement for a professional Fluke cable certification system.
Its strength is different.
It provides practical functions for:
Cable tracing
Wire-map testing
Cable length checking
PoE troubleshooting
Switch-port identification
General network troubleshooting
For CCTV installers, office IT teams, network technicians and maintenance personnel, these functions may cover many common daily jobs.
For formal structured-cabling certification, use the appropriate professional certification equipment.
FNIRSI LPM-10A Network Cable Tester Malaysia
Not sure whether you need a basic RJ45 tester, FNIRSI LPM-10A, NOYAFA network tester or professional cable certification equipment?
Tell us what result your customer requires.
MTM Precision can help you select the appropriate category of network testing instrument for the application.
MTM Precision Sdn Bhd
Showroom & Service Centre:
No. 29-1 & 29-2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Tel: 03-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
Before buying, WhatsApp us a photo of your existing network tester, network cabinet, CCTV installation or project testing requirement.
Tell us whether your work is mainly troubleshooting, cable tracing, PoE, CCTV, office networking or formal cable certification, and we can help identify the suitable tester category.
Supply and enquiries throughout Malaysia, including Selangor, Kuala Lumpur, Johor, Penang, Melaka, Negeri Sembilan, Perak, Pahang, Kelantan, Terengganu, Kedah, Perlis, Sabah and Sarawak.
06 Oct 2026
