Benetech GT260 PRO Digital Coating Thickness Gauge Malaysia
Benetech GT260 PRO Digital Coating Thickness Gauge Malaysia
Introduction
The Benetech GT260 PRO Digital Coating Thickness Gauge is a portable instrument designed to measure the thickness of suitable non-magnetic coatings on ferrous metal substrates and non-conductive coatings on non-ferrous metal substrates.
In Malaysia, coating thickness measurement is widely used in used car inspections, automotive paintwork assessments, vehicle workshops, metal fabrication, and industrial surface inspection.
MTM Precision Sdn Bhd supplies professional testing and measuring instruments for customers throughout Malaysia.
What Is the Benetech GT260 PRO?
The Benetech GT260 PRO is a digital coating thickness measuring instrument designed for convenient inspection of painted metal surfaces.
Typical applications include:
- Used car paint thickness inspection
- Automotive body repair assessment
- Repainting and refinishing inspection
- Steel surface coating measurement
- Aluminium panel coating inspection
- Manufacturing quality control
The instrument helps users compare coating thickness readings across different measurement points and identify areas requiring further investigation.
Key Features of the Benetech GT260 PRO
1. Digital Coating Thickness Measurement
The GT260 PRO provides numerical coating thickness readings, commonly expressed in micrometres (碌m).
2. Ferrous and Non-Ferrous Substrate Applications
The instrument is intended for compatible steel and aluminium substrates. Users should verify the exact substrate recognition capabilities and supported coating types against the supplied model documentation.
3. Portable Design
Its handheld design is suitable for workshops, vehicle inspection areas, and on-site industrial applications.
4. Multiple-Point Inspection
Users can take readings from different locations to compare coating thickness variations.
5. Automotive Inspection Applications
The GT260 PRO can assist with evaluating paint thickness patterns on suitable metal vehicle body panels.
6. Digital Display
Measurement readings are displayed digitally for convenient inspection and comparison.
Benetech GT260 PRO for Used Car Inspection Malaysia
Used car buyers and vehicle inspection professionals often want to identify panels that may have been repainted or repaired.
A coating thickness gauge helps compare measurements across doors, bonnets, roofs, and other compatible metal body panels.
Significant variations may indicate additional coating layers, refinishing, or repairs. However, readings alone cannot confirm accident history.
Users should also consider factory paint variation, substrate material, panel construction, and visual inspection findings.
Benetech GT260 PRO for Automotive Workshops
Automotive workshops can use a coating thickness gauge to document paint thickness before and after suitable refinishing work.
Common applications include:
- Paintwork inspection
- Vehicle restoration assessment
- Repaint thickness comparison
- Panel condition evaluation
- Quality control documentation
For reliable results, measurements should be taken on clean surfaces using appropriate calibration or verification procedures.
Industrial Coating Thickness Measurement Malaysia
Beyond automotive applications, the GT260 PRO may be useful for general coating inspection on compatible metal substrates.
Examples include:
- Painted steel components
- Coated aluminium panels
- Metal fabrication workshops
- Equipment surface inspection
- General manufacturing quality control
For formal industrial coating acceptance, buyers should confirm measurement accuracy, coating compatibility, calibration requirements, and applicable inspection standards before selecting an instrument.
How to Use the Benetech GT260 PRO
Step 1: Identify the substrate material and coating type.
Step 2: Clean the surface to remove loose dust, dirt, and contamination.
Step 3: Verify the instrument using suitable reference plates or thickness foils according to the manufacturer instructions.
Step 4: Position the measuring probe correctly against the surface.
Step 5: Record the displayed coating thickness reading.
Step 6: Repeat measurements at several locations.
Step 7: Compare readings and investigate unusual variations.
Avoid making conclusions based on only one measurement.
How to Choose a Coating Thickness Gauge in Malaysia
Before purchasing a digital coating thickness gauge, consider:
- Steel and aluminium compatibility
- Measurement range and accuracy
- Substrate recognition capability
- Display readability
- Calibration and verification procedures
- Data recording requirements
- Intended automotive or industrial application
- Local supplier and after-sales support
For specialised inspection requirements, consult MTM Precision before selecting the instrument.
Benetech GT260 PRO FAQ
Q1: Can the GT260 PRO measure car paint thickness?
Yes, it is intended for coating thickness inspection on compatible metal vehicle panels.
Q2: Can it measure aluminium car panels?
Non-ferrous measurement capability should be confirmed against the exact GT260 PRO version and manufacturer documentation.
Q3: Can it measure paint on plastic bumpers?
Conventional magnetic induction and eddy-current coating thickness gauges are not suitable for measuring paint thickness on plastic substrates.
Q4: Can it detect accident repairs?
Unusual coating thickness patterns may suggest repainting or repair, but the instrument cannot independently prove accident damage.
Q5: Is it suitable for industrial coating inspection?
It may be suitable for general inspection on compatible metal substrates. Formal acceptance testing requires verification of accuracy, calibration and applicable standards.
Where to Buy Benetech GT260 PRO in Malaysia
MTM Precision Sdn Bhd supplies measuring and testing instruments for automotive workshops, industrial companies, maintenance professionals, and inspection teams.
Customers from Kuala Lumpur, Selangor, Johor, Penang, Melaka, Negeri Sembilan, Perak, Pahang, Kedah, Kelantan, Terengganu, Perlis, Sabah, and Sarawak may contact our team for product enquiries and availability.
Contact MTM Precision Sdn Bhd
Showroom & Service Centre:
No 29-1 & 2, Jalan Bandar 18,
Pusat Bandar Puchong,
47160 Puchong, Selangor, Malaysia.
Tel: 03-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
Send us your inspection application or instrument enquiry through WhatsApp. Our team can assist with product selection, quotation, and availability.
Conclusion
The Benetech GT260 PRO Digital Coating Thickness Gauge is a practical option to consider for automotive paint inspection and general coating measurement on suitable metal substrates.
For customers in Malaysia looking for a portable coating thickness measuring instrument, MTM Precision can assist in evaluating the GT260 PRO against specific inspection requirements.
17 Oct 2026
