FABISENSE PTH-10DH and PTH-10E Portable Gas Detector Buying Guide Malaysia
FABISENSE PTH-10DH and PTH-10E Portable Gas Detector Buying Guide Malaysia Content The FABISENSE PTH-10DH and PTH-10E portable gas detectors offer different measurement combinations. The PTH-10DH measures carbon monoxide and altitude, while the PTH-10E measures carbon monoxide and carbon dioxide. Both models also display temperature and humidity, according to the supplied manufacturer catalogue. For buyers in Malaysia, the main selection question is whether you need altitude information or CO2 measurement alongside CO detection. PTH-10DH vs PTH-10E - What Is the Difference? Although the instruments share a similar appearance, their measurement functions differ. FunctionPTH-10DHPTH-10ECarbon monoxide - COYesYesCarbon dioxide - CO2Not listedYesAltitudeYesNot listedTemperatureYesYesRelative humidityYesYesBuzzer alertListedListedLow battery alarmListedListedBattery capacity1000 mAh1000 mAh Choose by the exact model number. A PTH-10DH should not be purchased on the assumption that it measures CO2, and the PTH-10E catalogue specification does not list altitude measurement. FABISENSE PTH-10DH - CO Detector and Altimeter The PTH-10DH combines carbon monoxide detection with an altitude display. The catalogue lists: CO range: 0500 ppm. CO resolution: 1 ppm. Stated CO accuracy: ±10%. Altitude range: 100 to 5000 m. Altitude resolution: 1 m. Temperature and humidity display. Buzzer alert and low battery alarm. The manufacturer illustrates applications including mountain climbing and camping. Buyers considering these uses should also confirm operating limits, environmental protection and alarm performance. The catalogue’s altitude accuracy wording is unclear and should be clarified before relying on altitude readings for a particular task. An altitude display should not replace appropriate navigation equipment. FABISENSE PTH-10E - CO and CO2 Detector The PTH-10E combines carbon monoxide and carbon dioxide measurement in one portable instrument. The catalogue lists: CO range: 0500 ppm. Stated CO accuracy: ±10%. CO2 range: Numerically stated as 4005000, with a unit discrepancy in the specification table. Stated CO2 accuracy: ±(50 ppm + 5%). Temperature and humidity display. Buzzer alert and low battery alarm. The product illustration labels CO2 readings in ppm, but the range row contains an inconsistent unit. Confirm the CO2 range and the basis of the percentage accuracy term in the current manufacturer datasheet before ordering. The supplied page does not identify the CO or CO2 sensor technology. It should therefore not be described as using an electrochemical CO sensor or an NDIR CO2 sensor without further documentation. Understanding CO and CO2 Carbon monoxide - CO and carbon dioxide - CO2 are separate gases. Their readings serve different purposes and should not be treated as interchangeable. When selecting a detector, check that the instrument explicitly measures the gas required for your application. Neither model is listed on this catalogue page as measuring: Oxygen - O2 Combustible gas or LEL Hydrogen sulphide - H2S PM2.5 Formaldehyde - HCHO TVOC These models should not be described as four-gas detectors. Temperature, Humidity and Physical Specifications The supplied catalogue lists the following shared specifications: ParameterCatalogue specificationTemperature measurement range10°C to 50°CStated temperature accuracy±1.5°CHumidity measurement range095% RHStated humidity accuracy±5% RHBattery1000 mAh lithium-polymerCharging connectionUSB Type-CProduct dimensions76 × 70 × 30 mmListed working temperature20°C to 60°C The working temperature range and temperature measurement range are different specifications. Operation within the listed working range does not establish measurement accuracy outside the specified measurement range. The charging row also lists a maximum voltage that requires clarification. Use only the power supply and voltage expressly approved in the supplied product manual. Applications and Selection Considerations in Malaysia Outdoor Recreation The PTH-10DH may interest buyers who want CO readings and an altitude display in a compact device. Confirm battery runtime, water resistance, sensor limitations and performance at the intended altitude before selection. Offices and Shared Indoor Spaces The PTH-10E may be considered when the required parameters include both CO and CO2, together with temperature and humidity. Confirm the CO2 specification and measurement method before using readings to guide a monitoring programme. Facilities and Equipment Checks For maintenance teams in Selangor, Kuala Lumpur, Johor and Penang, selection should begin with the gas being measured, the expected concentration and the required documentation. If the application specifies alarm certification, exposure logging, calibration or a particular testing method, request evidence that the exact model meets those requirements. What Should You Confirm Before Buying? 1. Sensor Type and Service Life Askfor the sensor technology, expected service life and replacement arrangements for each measured gas. 2. Alarm Settings The catalogue lists a buzzer, but does not specify alarm thresholds, delay times, adjustability or latching behaviour. Confirm these details if the alarm is important to the application. 3. Response Time A measurement range does not establish how quickly the detector responds. Request the specified response time and test conditions. 4. Calibration and Functional Testing Confirm the manufacturer’s calibration procedure, recommended intervals and any required functional checks. 5. Battery Runtime The catalogue states battery capacity, but does not provide runtime or charging time. 6. Environmental Protection No IP rating is stated on the supplied page. Confirm resistance to water, dust and condensation before choosing the detector for outdoor use. 7. Applicable Certification The supplied catalogue page does not establish approval as a residential CO alarm, an intrinsically safe instrument or a confined-space entry detector. Request model-specific documentation where these requirements apply. Frequently Asked Questions Does PTH-10DH measure CO2? CO2 measurement is not listed for the PTH-10DH. Its specified functions include CO and altitude, plus temperature and humidity. Does PTH-10E measure altitude? Altitude measurement is not listed for the PTH-10E. It is presented as a CO and CO2 detector. Do both models have an audible alert? The catalogue lists a buzzer alert for both models. Alarm thresholds and operating behaviour require confirmation. Can these models connect to a smartphone? Wi-Fi, Bluetooth and app connectivity are not listed on the supplied page. Can the detectors record and export measurements? Data logging and export functions are not specified in the supplied catalogue. Can either model replace a confined-space multi-gas detector? The supplied specifications do not establish suitability for that purpose. Neither model is listed as measuring oxygen, combustible gas or hydrogen sulphide. Enquire About FABISENSE Portable Gas Detectors Malaysia Contact MTM Precision Sdn Bhd to discuss the FABISENSE PTH-10DH and PTH-10E. Share the gases you need to measure, the intended environment and any required calibration or certification documents so the appropriate configuration can be checked. Specifications, model configuration and availability are subject to confirmation. MTM Precision Sdn Bhd Showroom & Service Centre: No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia Tel: 03-8080 7172 WhatsApp: +6016-660 7346 Email: mtmpre@yahoo.com Website: www.mtmpre.com.my SEO Meta Description Compare FABISENSE PTH-10DH and PTH-10E portable gas detectors in Malaysia. Explore CO, CO2, altitude functions and buying advice from MTM Precision.
21 Oct 2026
