FABISENSE PTH-10A, PTH-10B, PTH-10C and PTH-10D Portable Gas Detector Buying Guide Malaysia
FABISENSE PTH-10A, PTH-10B, PTH-10C and PTH-10D Portable Gas Detector Buying Guide Malaysia
Content
The FABISENSE PTH-10 series offers four portable detector configurations for different gases. Choose PTH-10A for formaldehyde, PTH-10B for flammable gas, PTH-10C for carbon dioxide or PTH-10D for carbon monoxide, according to the supplied manufacturer catalogue.
All four models also list temperature, humidity, a buzzer alert and a low battery alarm. Their compact, waterdrop-shaped housing includes a hanging loop, while the catalogue also illustrates magnetic attachment.
Each model has a different gas measurement function. The series does not represent one detector that measures all four gases.
FABISENSE PTH-10 Model Comparison
ModelMain measurementCatalogue rangeListed resolutionPTH-10AFormaldehyde - HCHO0–3 mg/m³0.001 mg/m³PTH-10BFlammable gas1–20% LEL; also printed as 100–10,000 ppm100 ppm / 1% LELPTH-10CCarbon dioxide - CO2400–5000 ppm1 ppmPTH-10DCarbon monoxide - CO0–500 ppm1 ppm
For PTH-10B, confirm the calibration gas and the relationship between the printed ppm and %LEL figures. The supplied page does not establish a universal conversion between these units.
PTH-10A - Portable Formaldehyde Monitor
The FABISENSE PTH-10A measures formaldehyde alongside temperature and relative humidity.
Its listed 0–3 mg/m³ HCHO range and 0.001 mg/m³ resolution provide a numerical display for preliminary formaldehyde observations.
However, HCHO accuracy is not stated. Display resolution should not be presented as measurement accuracy.
Before selecting this model for a defined assessment, request information on:
Sensor technology
Measurement accuracy
Response time
Cross-sensitivity
Calibration and maintenance
PTH-10B - Portable Flammable Gas Detector
The FABISENSE PTH-10B is the flammable gas configuration.
The catalogue lists temperature, humidity and alarm functions, but does not identify the target gas or provide an accuracy figure.
Confirm suitability for the intended fuel before purchase. Methane, propane, butane and LPG compatibility should not be assumed without model-specific documentation.
Also confirm alarm thresholds, response behaviour and recommended positioning. A photograph near cooking equipment does not establish the correct installation location.
PTH-10C - Portable CO2 Detector
The FABISENSE PTH-10C measures CO2 from 400–5000 ppm, with temperature and humidity readings.
It may interest users who want a compact instrument for observing CO2 at selected indoor locations, including offices, meeting rooms and classrooms.
For useful comparisons, keep the measurement position consistent and record occupancy, ventilation conditions and observation time.
The catalogue’s CO2 accuracy notation involves 50 ppm and 5%, but requires clarification of the calculation and percentage basis.
The supplied page does not identify the CO2 sensor technology. NDIR sensing should not be claimed without confirmation.
PTH-10D - Portable CO Detector
The FABISENSE PTH-10D provides CO measurement from 0–500 ppm, with 1 ppm resolution and a catalogue-stated accuracy of ±10%.
Confirm the accuracy conditions, sensor life and response time before selecting it for a particular monitoring task.
The page illustrates magnetic attachment using the PTH-10D. If this feature is required for another variant, confirm its availability in the quotation.
CO and CO2 are different gases. PTH-10D is the CO configuration; PTH-10C is the CO2 configuration.
Shared Temperature and Humidity Functions
ParameterCatalogue specificationTemperature range−10°C to 50°CStated temperature accuracy±1.5°CHumidity range0–95% RHStated humidity accuracy±5% RH
Temperature and humidity readings provide additional context when observing conditions at the instrument’s location.
Allow readings to stabilise after moving the device, following the operating manual. Keep sensing openings clear and avoid direct sunlight or nearby heat sources.
Battery, Charging and Dimensions
The catalogue lists the following shared specifications:
ParameterCatalogue specificationBattery1000 mAh lithium-polymerCharging connectionUSB Type-CCharging input5 V, 1 AWorking temperature−20°C to 60°CDimensions76 × 70 × 30 mm
Battery runtime and charging time are not stated.
The working temperature range is wider than the temperature measurement range. This does not establish measurement accuracy throughout the full working range.
Selecting a PTH-10 Detector in Malaysia
For buyers in Selangor, Kuala Lumpur, Johor and Penang, begin with the parameter required:
Choose PTH-10A for formaldehyde measurement.
Choose PTH-10B for flammable gas detection after confirming gas compatibility.
Choose PTH-10C for carbon dioxide measurement.
Choose PTH-10D for carbon monoxide measurement.
If the task requires simultaneous measurement of several gases, select an instrument explicitly configured for those gases.
Understanding the Alarm Functions
The catalogue lists a buzzer alert and low battery alarm for all four models.
It does not specify alarm concentration thresholds, activation delays, sound output or adjustment options.
Where alarm performance is essential, request the exact model’s manual and supporting documentation. A buzzer feature alone does not establish certified residential alarm performance or suitability for occupational gas monitoring.
Frequently Asked Questions
Does one PTH-10 unit measure HCHO, flammable gas, CO2 and CO?
No. The catalogue presents four separate configurations.
Does PTH-10C measure carbon monoxide?
CO measurement is not listed for PTH-10C. PTH-10D is the CO model.
Does PTH-10A measure TVOC?
TVOC measurement is not listed on the supplied page.
Does the series support Wi-Fi or an app?
Wi-Fi, Bluetooth and app functions are not listed.
Can it record and export readings?
Data logging and export are not specified.
Is the detector waterproof?
No IP rating is provided. The waterdrop-shaped design describes its appearance rather than water resistance.
Can these models replace a confined-space multi-gas detector?
The supplied specifications do not establish that capability. Oxygen detection, simultaneous multi-gas measurement and intrinsic safety approval are not listed.
Enquire About FABISENSE PTH-10 Series Malaysia
Contact MTM Precision Sdn Bhd to compare the FABISENSE PTH-10A, PTH-10B, PTH-10C and PTH-10D portable detectors.
Share the gas you need to measure, the intended environment and any required alarm or calibration documentation so the appropriate configuration can be checked. Specifications and availability are subject to confirmation.
SEO Meta Description
Compare FABISENSE PTH-10A, PTH-10B, PTH-10C and PTH-10D portable HCHO, flammable gas, CO2 and CO detectors in Malaysia with MTM Precision.
MTM Precision Sdn Bhd
Showroom & Service Centre: No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: 03-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
23 Oct 2026
