ETT30A and ETT30B Heavy Duty Elevator Tripods for Laser Levels Malaysia

Choosing an elevator tripod starts with the required working height, instrument compatibility and site conditions. The ETT30A and ETT30B elevator tripods provide adjustable instrument support for construction and laser levelling applications in Malaysia.

MTM Precision Sdn Bhd can assist contractors and equipment users in selecting a suitable model for their laser level and working requirements.

What Is an Elevator Tripod?

An elevator tripod incorporates a lifting column that allows the mounted instrument height to be adjusted without repeatedly changing the tripod leg positions.

This is useful when positioning a compatible laser level for reference lines, ceiling installation, partition work and other construction tasks. The instrument must still be set up and levelled according to its own operating instructions.

ETT30A and ETT30B Model Comparison

The supplied catalogue lists the following specifications, with model names corrected to the ETT series:

ETT30A-228

Tripod height: 112–244 cm

Working height: 100–225 cm

Net weight: 5.19 kg

Lock type: Quick Lock

ETT30A-310

Tripod height: 115–310 cm

Working height: 106–316 cm

Net weight: 5.40 kg

Lock type: Quick Lock

ETT30A-325

Tripod height: 125–380 cm

Working height: 114–325 cm

Net weight: 5.50 kg

Lock type: Quick Lock

ETT30B-305

Tripod height: 127–336 cm

Working height: 114–308 cm

Net weight: 7.00 kg

Lock type: Quick Lock

Specification note: The catalogue lists a maximum working height of 316 cm for ETT30A-310, exceeding its listed maximum tripod height of 310 cm. This entry and the definitions of tripod height and working height require supplier confirmation before selection. Model suffixes should not be treated as verified maximum heights.

Key Features

Aluminium Alloy Construction

The catalogue specifies an aluminium alloy structure for the tripod range. When choosing a tripod for regular site use, consider its weight alongside the height and support requirements of the instrument.

5/8"-11 Mounting Bolt

The catalogue specifies a 5/8"-11 mounting bolt. Check the instrument’s mounting thread, base design and installation instructions before ordering.

A matching thread alone does not establish full compatibility. Instrument weight, mounting clearance and the tripod’s rated load must also be checked.

Quick Lock Leg Clamps

Quick lock clamps allow the tripod legs to be adjusted during setup. Each clamp should be securely locked before the instrument is mounted or the lifting column is raised.

Elevating Column

The lifting mechanism allows instrument height adjustment after the legs have been positioned. Follow the supplied operating instructions and secure the column before taking measurements.

ETT30A or ETT30B: Which Should You Choose?

Choose ETT30A When:

You are considering the catalogue’s economical heavy-duty elevator tripod option.

You want to compare several listed height configurations.

Transport weight is an important part of your selection.

The ETT30A-325 is listed at 5.50 kg, compared with 7.00 kg for the ETT30B-305. However, a lower weight does not by itself establish suitability for a particular instrument.

Choose ETT30B When:

You need an elevator tripod specifically described in the catalogue for rotary laser applications.

You prefer the ETT30B lifting arrangement, subject to checking the actual configuration.

The listed working height suits your project.

The catalogue describes ETT30B as a heavy-duty elevator tripod suitable for rotary lasers. Its higher net weight should not be interpreted as proof of a higher load capacity, as no maximum load rating is provided.

Applications for Malaysian Contractors

Interior Fit-Out

A compatible laser level and elevator tripod can help position reference lines for ceiling, partition and interior installation work. Check the required instrument height before choosing a model.

Building Construction

Elevator tripods can support compatible laser equipment used for site reference work. Place the tripod on firm ground and protect the setup from accidental contact and nearby machinery.

Mechanical and Electrical Installation

Adjustable instrument height can be useful when positioning laser references for installation tasks. Confirm that the tripod can achieve the required height while remaining securely supported.

Rotary Laser Setup

For compatible rotary lasers, select the tripod according to the instrument manufacturer’s requirements. The ETT30B is specifically identified for rotary laser use in the supplied catalogue, but the mounting and load requirements still need verification.

Pre-Purchase Checklist

Before ordering an ETT elevator tripod, confirm:

1. Instrument brand and model.

2. Mounting thread and base configuration.

3. Instrument weight, including mounted accessories.

4. Required minimum and maximum working height.

5. Tripod maximum load rating.

6. Ground conditions and available setup space.

7. Folded dimensions and transport requirements.

8. Confirmed specifications for the exact model supplied.

The supplied catalogue does not state maximum load capacity or folded dimensions. Request these details if they affect your selection.

Practical Setup Tips

Position the tripod on a firm, suitable surface.

Spread and secure the legs according to the operating instructions.

Check every leg clamp before mounting the instrument.

Secure the instrument to the mounting bolt without overtightening.

Raise the lifting column only within the permitted operating limits.

Recheck instrument level and stability after changing the height.

Avoid placing the tripod where workers, vehicles or materials may strike it.

A tripod supports the instrument; it does not improve the instrument’s stated measurement accuracy. Movement or poor setup can affect results.

Frequently Asked Questions

What is the difference between ETT30A and ETT30B?

The catalogue describes ETT30A as an economical heavy-duty elevator tripod and ETT30B as a heavy-duty elevator tripod suitable for rotary lasers. Their listed weights and height configurations differ. Confirm load capacity and instrument compatibility before choosing.

Does this tripod fit every laser level?

No. The catalogue specifies a 5/8"-11 mounting bolt, but compatibility also depends on instrument weight, base design, mounting clearance and manufacturer requirements.

Can I use it with a total station?

Do not assume suitability from the mounting thread alone. Total stations have specific support and stability requirements. Confirm approval for the exact instrument and tripod combination before use.

What is the working height of ETT30A-325?

The supplied catalogue lists a working height of 114–325 cm and a tripod height of 125–380 cm. Confirm how these dimensions are measured before ordering for a height-critical application.

What is the working height of ETT30B-305?

The supplied catalogue lists 114–308 cm. Confirm the specification for the actual model supplied rather than relying on the “305” model suffix.

What is the maximum load capacity?

The supplied catalogue does not state a maximum load capacity. Obtain the rated load before mounting an instrument.

Is a heavier tripod always better?

Weight is only one selection factor. Leg construction, locking condition, lifting mechanism, setup height, ground conditions and the instrument’s requirements also matter.

Where can I enquire in Malaysia?

Contact MTM Precision Sdn Bhd in Puchong, Selangor, for model selection and supply enquiries. Share your instrument model and required working height so the relevant specifications can be checked.

SEO Meta Description

Compare ETT30A and ETT30B elevator tripods for laser levels in Malaysia. Review listed heights, mounting compatibility and selection with MTM Precision.

ETT30A and ETT30B Heavy Duty Elevator Tripods for Laser Levels Malaysia

Discover

Information

Subscribe News