FABISENSE PTH-256A Plug-In Carbon Monoxide Detector Buying Guide Malaysia
Title
FABISENSE PTH-256A Plug-In Carbon Monoxide Detector Buying Guide Malaysia
Content
The FABISENSE PTH-256A Plug-In Air Detector combines carbon monoxide measurement, temperature and humidity readings, and a buzzer alert in a compact circular housing.
According to the supplied manufacturer catalogue, it offers a CO range of 0–1000 ppm, a 1 ppm display resolution, a replaceable plug and a built-in 1000 mAh lithium battery.
For buyers in Malaysia, selection should consider the required CO detection performance, alarm behaviour, installation position and supplied plug configuration.
What Does the FABISENSE PTH-256A Measure?
The catalogue lists three measurement functions:
Carbon monoxide - CO
Temperature
Relative humidity
The central display shows CO in parts per million, or ppm, with temperature and humidity information below it.
CO2, combustible gas, smoke, PM2.5, formaldehyde and TVOC measurement are not listed for this model.
Carbon Monoxide Range and Resolution
The PTH-256A has a listed CO measurement range of 0–1000 ppm and 1 ppm resolution.
Resolution describes the displayed increment. It does not establish an accuracy of ±1 ppm.
The supplied page does not provide CO accuracy, sensor technology, response time or cross-sensitivity information. Request these details if measurement performance affects your buying decision.
Temperature and Humidity Display
The additional environmental readings provide information about conditions at the instrument’s location.
ParameterCatalogue specificationTemperature range−10°C to 50°CStated temperature accuracy±1.5°CHumidity range0–95% RHStated humidity accuracy±5%
Keep the sensing openings clear and follow the manufacturer’s placement instructions. Nearby heat sources, direct sunlight and obstructed airflow can affect how representative the readings are.
Plug-In Power and Built-In Battery
The catalogue lists 100–240 V AC, 50/60 Hz power and a built-in 1000 mAh lithium battery.
This identifies mains power and an internal battery, but the page does not explain:
Automatic changeover during a power failure
Battery runtime
Charging time
Alarm operation without mains power
Battery replacement arrangements
Confirm backup behaviour before relying on operation during a power interruption. Battery capacity alone does not establish backup duration.
Replaceable Plug for Malaysian Installations
The PTH-256A lists a replaceable plug. The product photograph illustrates one plug arrangement, but does not establish the version supplied for Malaysia.
Specify the required Malaysia-compatible plug configuration in the quotation.
Also check the detector’s clearance around adjacent sockets and ensure that the selected position follows its installation manual.
Buzzer Alert and Alarm Settings
A buzzer alert is listed in the feature description and specification table.
However, the supplied page does not state:
CO alarm thresholds
Activation delays
Sound output
Adjustable settings
Silencing and reset behaviour
Sensor fault or end-of-life indications
The illustrated 30 ppm reading is a display example, not a documented alarm threshold.
Where certified CO alarm performance is required, obtain supporting documentation for the exact model supplied.
Physical Specifications
ParameterCatalogue informationModelPTH-256ACO range0–1000 ppmCO resolution1 ppmPower supply100–240 V AC, 50/60 HzBatteryBuilt-in 1000 mAh lithium batteryPlugReplaceableWorking temperature−10°C to 50°CDimensions76 × 76 × 62 mmHousing descriptionFlame-retardant materials
The housing description does not establish a specific flame-retardancy rating, explosion protection or intrinsic safety approval.
Installation Considerations
A suitable socket must also be a suitable detector location. Follow the model-specific manual for mounting position, clearance and distance from appliances.
Avoid covering the instrument or positioning it where furniture obstructs its openings.
The catalogue includes a recreational vehicle illustration. This does not, by itself, establish approval for vehicle, caravan or marine use. Confirm the intended-use documentation if purchasing for those environments.
Choosing the PTH-256A in Malaysia
For buyers in Puchong, Kuala Lumpur, Johor and Penang, the PTH-256A may be considered when the required functions are CO display, temperature, humidity and an on-device buzzer.
Before ordering, confirm the CO sensor performance, alarm specification, battery behaviour and plug type.
If your requirement includes remote alerts, recorded measurements or additional gases, check for a model explicitly offering those functions.
Frequently Asked Questions
Does PTH-256A measure carbon dioxide?
CO2 measurement is not listed. This model is presented as a carbon monoxide detector.
Does it detect LPG or smoke?
Combustible gas and smoke detection are not listed on the supplied page.
Does it include a battery?
The catalogue specifies a built-in 1000 mAh lithium battery. Runtime and backup operation require confirmation.
Does it support Wi-Fi or Tuya Smart?
Wi-Fi, Bluetooth and app connectivity are not specified.
Can it record and export readings?
Data logging and export are not listed.
Is it the same as PTH-256L or PTH-256M?
No. The PTH-256A page describes a plug-in CO detector. The separately presented PTH-256L and PTH-256M combine gas detection with multifunction lighting. Confirm specifications by complete model number.
Can it replace an industrial personal gas detector?
The supplied page does not establish industrial personal monitoring approval, exposure logging or hazardous-area suitability.
Enquire About FABISENSE PTH-256A Malaysia
Contact MTM Precision Sdn Bhd to discuss the FABISENSE PTH-256A Plug-In Carbon Monoxide Detector.
Share your installation location, plug requirement and required alarm documentation so the configuration can be checked. Specifications and availability are subject to confirmation.
SEO Meta Description
Explore FABISENSE PTH-256A plug-in CO detector features, temperature, humidity, buzzer alert and built-in battery in Malaysia with MTM Precision.
MTM Precision Sdn Bhd
Showroom & Service Centre: No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: 03-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
23 Oct 2026
