FABISENSE PTH-102F Portable Oxygen and Barometric Pressure Detector Malaysia
FABISENSE PTH-102F Portable Oxygen and Barometric Pressure Detector Malaysia
Content
The FABISENSE PTH-102F Portable Oxygen Detector combines ambient oxygen measurement, barometric pressure detection, temperature and humidity readings, and a buzzer alarm in a compact instrument.
The catalogue presents the PTH-102F for hiking, camping and high-altitude travel. For buyers in Malaysia, the key selection points are its oxygen measurement specifications, pressure and altitude functions, battery operation and suitability for the intended environment.
What Does the PTH-102F Measure?
The advertised functions include:
Ambient oxygen concentration
Barometric pressure
Temperature
Relative humidity
Buzzer alarm
The promotional panel also identifies pressure and altitude, while the illustrated screen shows an elevation reading in metres.
These functions bring several environmental readings into one portable device. However, buyers requiring precise altitude or pressure measurements should request the corresponding specifications, as these are not provided on the supplied page.
Ambient Oxygen Measurement from 0% to 30%
The catalogue lists an oxygen measuring range of 0%-30% and a T90 response time of less than 15 seconds.
T90 describes the time taken to reach 90% of the final response under the relevant test conditions. It should not be interpreted as the guaranteed time for every alarm to activate.
The oxygen accuracy entry is printed as “±0.6% reading at 10% O2.” This wording does not clearly establish whether the tolerance is relative to the reading or expressed in oxygen percentage points. Confirm the manufacturer's interpretation before using the specification for a technical comparison.
The supplied page does not identify the oxygen sensor technology, calibration procedure or sensor replacement interval.
Oxygen Percentage, Pressure and Altitude
The PTH-102F displays oxygen concentration as a percentage and advertises barometric pressure detection. These are separate measurements and should be assessed separately when choosing the instrument.
For the pressure and altitude functions, request:
Pressure measuring range and units
Pressure accuracy and resolution
Altitude range and accuracy
Altitude reference-setting procedure
Any required pressure compensation or adjustment
The mountain imagery does not establish a maximum operating altitude. Likewise, an illustrated elevation reading is not an altitude accuracy specification.
The PTH-102F measures ambient conditions. It is not presented as a blood oxygen saturation meter or a medical diagnostic device.
Temperature and Humidity Monitoring
The environmental measurement table lists:
ParameterCatalogue specificationTemperature range-10°C to 50°CTemperature accuracy±1.5°CHumidity range0%-95% RHHumidity accuracy±5% RH
These readings provide additional information about the surroundings during outdoor use or environmental checks.
The oxygen measurement section separately lists operating conditions of -30°C to 55°C and 5%-95% RH, while the complete product's working temperature is listed as -10°C to 50°C.
Buyers should use the complete-device operating limits confirmed in the final manual rather than assuming the wider oxygen-section temperature range applies to the whole instrument.
Compact Rechargeable Design
The PTH-102F has listed dimensions of 76 × 70 × 26 mm and a 1000 mAh lithium-polymer battery.
The catalogue identifies a Type-C connection, making charging arrangements an important part of the purchase enquiry. The input entry is printed as DC 5 V-DC 24 V maximum, but the page does not explain the supported charging protocol.
Confirm the approved charger and cable requirements before connecting a power supply. A Type-C connector alone does not establish compatibility with every charger or voltage.
Battery runtime and charging time are not specified on the supplied page.
PTH-102F Specification Summary
ParameterListed informationModelFABISENSE PTH-102FOxygen range0%-30%Oxygen accuracy wording±0.6% reading at 10% O2Oxygen response timeT90 <15 secondsBarometric pressure detectionAdvertisedAltitude functionAdvertised; specifications not statedTemperature range-10°C to 50°CTemperature accuracy±1.5°CHumidity range0%-95% RHHumidity accuracy±5% RHBuzzer alarmIncludedBatteryLi-Po, 1000 mAhConnectionType-CComplete-device working temperature-10°C to 50°CDimensions76 × 70 × 26 mm
Choosing the PTH-102F for Your Application
For hiking and camping equipment buyers, the PTH-102F combines environmental measurements in a portable format. Confirm the required battery runtime, carrying arrangement and protection against rain, dust and condensation.
The supplied page does not state an IP rating or drop-test rating.
For industrial purchasing, provide the intended task and required documentation when enquiring. The catalogue does not establish confined-space approval, hazardous-area certification or compliance with a particular occupational gas detector standard.
Frequently Asked Questions
Does the PTH-102F detect carbon monoxide?
CO detection is not listed for this model. Its advertised gas measurement is oxygen.
Does it measure blood oxygen?
No blood oxygen measurement function is advertised. The PTH-102F is an ambient oxygen and environmental detector.
Does it display altitude?
The promotional material advertises pressure and altitude, and the display illustration shows elevation in metres. Confirm the altitude range, accuracy and adjustment procedure before purchase.
Are the alarm thresholds adjustable?
A buzzer alarm is listed, but alarm thresholds and adjustment options are not specified.
Does it connect to an app?
WiFi, Bluetooth and app connectivity are not advertised on the supplied page.
Is it waterproof?
No defined water-resistance specification or IP rating is provided.
How long does the battery last?
The catalogue lists a 1000 mAh battery but does not state operating time. Confirm runtime for your intended use.
SEO Meta Description
Explore the FABISENSE PTH-102F portable oxygen and barometric pressure detector with temperature, humidity and buzzer alarm in Malaysia.
Contact MTM Precision Sdn Bhd with your oxygen monitoring requirements, intended environment and required documentation to enquire about the FABISENSE PTH-102F.
MTM Precision Sdn Bhd
Showroom & Service Centre: No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: 03-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
24 Oct 2026
