FABISENSE PTH-103F Portable Oxygen and Barometric Pressure Monitor Malaysia
FABISENSE PTH-103F Portable Oxygen and Barometric Pressure Monitor Malaysia
Content
The FABISENSE PTH-103F Portable Oxygen Detector combines ambient oxygen measurement, barometric pressure detection, temperature and humidity readings, and a buzzer alarm in a compact square housing.
The catalogue presents this model for hiking, camping and high-altitude travel. For buyers in Malaysia, the main selection points are oxygen measurement performance, pressure and altitude specifications, battery runtime and environmental suitability.
Four Environmental Parameters in One Instrument
The PTH-103F advertises:
Ambient oxygen concentration
Barometric pressure
Temperature
Relative humidity
The promotional panel also identifies an altitude function, and the illustrated display shows elevation in metres.
With listed dimensions of 74 × 74 × 32 mm, the instrument offers a portable format for users who want several environmental readings on one screen.
Oxygen Measurement Range and Response
The catalogue lists an oxygen measuring range of 0%-30% and a T90 response time of less than 15 seconds.
T90 describes the time taken to reach 90% of the final response under the relevant test conditions. It does not establish the complete alarm activation time.
The oxygen accuracy entry reads “±0.6% reading at 10% O2.” This wording requires clarification before a precise technical comparison, particularly whether it means a relative percentage of the reading or oxygen percentage points.
The supplied page does not identify the sensor technology, oxygen display resolution, calibration procedure or expected sensor life.
The PTH-103F measures ambient oxygen. Blood oxygen saturation measurement is not an advertised function.
Barometric Pressure and Altitude Functions
Barometric pressure detection is listed among the main functions. The catalogue also promotes pressure and altitude monitoring.
However, the supplied page does not specify:
Pressure range, accuracy or resolution
Available pressure units
Altitude range or accuracy
Altitude reference-setting procedure
Maximum permitted operating altitude
Buyers who require numerical pressure or altitude readings should request these details before ordering. The mountain imagery and example elevation reading do not establish altitude performance.
Temperature and Humidity Specifications
The environmental measurement table lists:
ParameterCatalogue specificationTemperature range-10°C to 50°CTemperature accuracy±1.5°CHumidity range0%-95% RHHumidity accuracy±5% RH
The oxygen measurement section separately lists operating conditions of -30°C to 55°C and 5%-95% RH, while the complete-device working temperature is stated as -10°C to 50°C.
Confirm the operating limits in the final manual. The wider conditions printed in the oxygen section should not automatically be applied to the complete instrument.
Buzzer Alarm and Display
A buzzer alarm is included in the catalogue specification. The illustrated display shows oxygen percentage, elevation, temperature, humidity and battery status.
The supplied page does not state the low-oxygen or high-oxygen alarm thresholds, adjustment options, buzzer sound level or alarm delay.
If alarm performance is central to the purchase, request the operating manual and relevant test information before selecting the device.
The colour segments surrounding the display should also be interpreted according to the manufacturer's instructions rather than treated as independently defined exposure limits.
Rechargeable Battery and Charging Requirements
The PTH-103F lists a 1000 mAh lithium-polymer battery and a Type-C connection.
The input information is printed as DC 5 V-DC 24 V maximum, but the supplied page does not explain the supported charging protocol. Confirm the approved charger and cable requirements before connecting a supply.
Battery runtime, charging time and operation during charging are not specified. These details matter when planning use away from a convenient power source.
PTH-103F Catalogue Specifications
ParameterListed informationModelFABISENSE PTH-103FOxygen range0%-30%Oxygen accuracy wording±0.6% reading at 10% O2Oxygen response timeT90 <15 secondsBarometric pressureDetection advertisedAltitudeFunction advertised; specifications not statedTemperature range-10°C to 50°CTemperature accuracy±1.5°CHumidity range0%-95% RHHumidity accuracy±5% RHBuzzer alarmIncludedBatteryLi-Po, 1000 mAhConnectionType-CComplete-device working temperature-10°C to 50°CDimensions74 × 74 × 32 mm
Buying Considerations for Outdoor Use in Malaysia
For hiking and camping equipment buyers in Malaysia, confirm how the instrument will be carried, protected and charged during the intended activity.
The supplied page does not provide an IP rating, defined rain resistance or drop-test rating. Its appearance alone does not establish resistance to water, dust or impact.
For workplace applications, identify the required standards and documentation at the enquiry stage. The catalogue does not establish hazardous-area approval or suitability for confined-space entry testing.
A clear enquiry should include the required oxygen range, expected operating conditions, runtime and any pressure or altitude accuracy requirement.
Frequently Asked Questions
Does the PTH-103F measure carbon monoxide?
CO detection is not listed. The advertised gas measurement is oxygen.
Does it measure blood oxygen saturation?
Blood oxygen saturation measurement is not advertised. This is an ambient oxygen and environmental detector.
Can it display altitude?
Altitude is promoted, and elevation appears in the display illustration. Confirm the range, accuracy and reference-setting procedure before purchase.
Are its alarm thresholds adjustable?
A buzzer alarm is listed, but threshold adjustment is not specified.
Does it connect to a phone?
WiFi, Bluetooth and app connectivity are not listed on the supplied page. A display symbol alone does not confirm a supported connection feature.
Is it waterproof?
No IP rating or defined waterproof specification is provided.
How long does the battery last?
The catalogue lists a 1000 mAh battery without a stated operating time. Request runtime information for your intended use.
SEO Meta Description
Explore the FABISENSE PTH-103F portable oxygen and barometric pressure monitor with temperature, humidity and buzzer alarm in Malaysia.
Contact MTM Precision Sdn Bhd with your monitoring application, expected environment and documentation requirements to enquire about the FABISENSE PTH-103F.
MTM Precision Sdn Bhd
Showroom & Service Centre: No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia
Tel: 03-8080 7172
WhatsApp: +6016-660 7346
Email: mtmpre@yahoo.com
Website: www.mtmpre.com.my
24 Oct 2026
