Coating Thickness Gauge vs Ultrasonic Thickness Gauge Malaysia

Coating Thickness Gauge vs Ultrasonic Thickness Gauge Malaysia

Introduction

Choosing between a coating thickness gauge and an ultrasonic thickness gauge is an important decision for industrial inspection, manufacturing quality control and maintenance applications in Malaysia.

Although both instruments are used to measure thickness, they are designed for different measurement objectives.

A coating thickness gauge is generally selected when the inspection requirement involves measuring a suitable paint layer or protective coating over a compatible substrate.

An ultrasonic thickness gauge is generally selected when the requirement involves measuring the thickness of a suitable material, such as a metal plate or pipe wall.

Confusing these two instrument categories can lead to unsuitable equipment selection, unreliable inspection results and unnecessary purchasing costs.

Industrial buyers in Malaysia may encounter models such as:

Landtek CM-8826FN Coating Thickness Gauge

UNI-T UT343E Coating Thickness Gauge

Benetech GM100+ Ultrasonic Thickness Gauge

Landtek TM-8812 Ultrasonic Thickness Gauge

These four models belong to two different measurement categories.

This guide explains the differences between coating thickness measurement and ultrasonic thickness measurement, their industrial applications, important limitations and how Malaysian customers can select the correct type of instrument.

For product information and application enquiries, contact MTM Precision Sdn Bhd, a supplier of industrial measuring and testing equipment in Malaysia.

1. What Is a Coating Thickness Gauge?

A coating thickness gauge is used to assess the thickness of a suitable coating or surface layer over a compatible substrate.

Typical coating thickness measurement applications include:

Industrial paint thickness inspection

Protective coating assessment

Metal fabrication quality control

Automotive paint inspection

Manufacturing surface finishing

Equipment repainting and refurbishment

Selected maintenance coating inspections

The instrument must be suitable for the combination of coating and substrate.

Different coating thickness gauges may use different measurement principles.

For example, certain coating measurement methods are intended for compatible coatings over ferrous metal substrates, while other methods may be suitable for particular non-ferrous metal substrates.

Not every coating thickness gauge supports every substrate.

Important: A coating thickness gauge should not automatically be assumed suitable for plastic, concrete, wood, every metal or every coating material.

The manufacturer's documented capabilities must be checked before use.

2. What Is an Ultrasonic Thickness Gauge?

An ultrasonic thickness gauge uses an ultrasonic measurement principle to assess the thickness of suitable materials.

Depending on the instrument and measurement conditions, ultrasonic thickness measurement may be relevant to:

Metal plate thickness inspection

Pipe wall thickness measurement

Industrial machinery components

Selected tank and vessel components

Maintenance-related wall thinning investigations

Suitable fabricated metal components

Engineering condition monitoring

An ultrasonic thickness gauge is generally selected when the inspection objective involves the thickness of the underlying material rather than the thickness of a protective coating.

However, suitability depends on material properties, component geometry, surface condition, instrument configuration and the applicable measurement method.

An ultrasonic thickness gauge does not automatically detect every internal defect or determine whether a component is safe for continued operation.

3. Main Difference Between Coating Thickness and Ultrasonic Thickness Measurement

The most important question is:

What exactly do you need to measure?

ComparisonCoating Thickness GaugeUltrasonic Thickness GaugeMain objectiveThickness of a suitable coatingThickness of a suitable materialCommon applicationPaint and protective coatingsMetal plates and pipe wallsTypical industrial userCoating inspector, finishing QA/QCMaintenance engineer, material inspectorMaterial considerationsCoating and substrate compatibilityUltrasonic properties of test materialSurface considerationsSubstrate, coating and geometryMaterial, surface and geometryCommon inspection concernCoating thickness consistencyMaterial thickness or possible wall thinningTypical examplePaint thickness on a compatible steel panelWall thickness of a compatible metal pipeImportant limitationDoes not measure metal wall thickness as its primary purposeDoes not automatically measure paint thickness separately

The two categories are not interchangeable.

A customer should identify the inspection objective before comparing individual models.

4. Landtek CM-8826FN - Coating Thickness Measurement

The Landtek CM-8826FN belongs to the coating thickness gauge category.

Buyers may evaluate this model for suitable applications involving paint or protective coating thickness measurement.

Potential inspection contexts include:

Industrial Protective Coatings

Manufacturers and maintenance teams may need to assess suitable protective coatings applied to metal components.

Metal Fabrication

Fabrication workshops may require coating thickness information as part of surface finishing quality control.

Industrial Equipment Finishing

Coating measurements may support selected inspection activities involving painted machinery or metal enclosures.

Manufacturing Quality Control

Inspection teams may compare coating thickness observations with approved specifications.

Before purchasing the Landtek CM-8826FN, buyers should confirm:

Supported substrate materials

Compatible coating types

Documented measurement range

Relevant measurement performance

Surface geometry limitations

Supplied product configuration

Applicable inspection requirements

The CM-8826FN should not be selected to measure metal pipe wall thickness merely because it is described as a thickness gauge.

Its primary product category is coating thickness measurement.

5. UNI-T UT343E - Coating Thickness Measurement

The UNI-T UT343E is another coating thickness gauge model that Malaysian industrial buyers may consider.

Like the Landtek CM-8826FN, its selection should begin with the actual coating inspection requirements.

Potential applications to evaluate include:

Manufacturing QA/QC: Selected coating thickness inspection of compatible components.

Metal Fabrication: Paint and protective coating quality checks.

Automotive Inspection: Suitable paint thickness inspection where the panel material and coating are compatible.

Industrial Maintenance: Coating assessment during equipment refurbishment or maintenance.

Surface Finishing: Selected production quality control activities.

These applications require confirmation of instrument suitability.

Buyers should not assume that the UNI-T UT343E and Landtek CM-8826FN have identical technical specifications, supported materials or measurement performance.

The appropriate choice depends on official product documentation and the customer's inspection requirements.

6. Benetech GM100+ - Ultrasonic Thickness Measurement

The Benetech GM100+ belongs to the ultrasonic thickness gauge category.

It is a model that buyers may evaluate when their inspection objective involves suitable material thickness measurement.

Potential inspection contexts include:

Metal Plate Inspection

Manufacturing and engineering teams may need thickness information for compatible metal plates.

Industrial Component Inspection

Selected machinery or fabricated components may require material thickness measurement.

Maintenance Assessment

Thickness measurements may support investigations into suspected material loss.

Engineering Quality Control

Suitable thickness observations may contribute to component inspection and documentation.

Before selecting the Benetech GM100+, customers should verify:

Supported materials

Expected thickness range

Measurement performance requirements

Component geometry

Surface condition

Operating environment

Relevant accessories and configuration

The Benetech GM100+ should not be treated as a substitute for a coating thickness gauge when the objective is to measure paint thickness separately.

7. Landtek TM-8812 - Ultrasonic Thickness Testing

The Landtek TM-8812 is an ultrasonic thickness gauge model that buyers may consider for suitable material thickness measurement applications.

A common area of interest is industrial pipe maintenance.

Potential inspection objectives include:

Selected pipe wall thickness measurements

Metal component thickness assessment

Maintenance-related wall thinning investigations

Industrial equipment condition monitoring

Suitable material thickness quality control

However, not every pipe material, diameter, coating condition or operating environment is suitable for every ultrasonic thickness gauge.

Pipe Wall Thickness

An appropriate ultrasonic thickness measurement method may provide information about the thickness of a compatible pipe wall.

Corrosion-Related Inspection

Thickness observations may contribute to investigations of possible material loss.

Maintenance Planning

Where suitable, repeated thickness observations can contribute to equipment condition monitoring.

Important Limitations

A thickness reading does not independently establish the complete condition of a pipe.

It does not automatically identify the thinnest point across an entire piping system.

It does not determine remaining service life without additional engineering assessment.

The Landtek TM-8812 should be evaluated against the actual pipe material, geometry, coating condition and inspection requirements before purchase.

8. Comparison of Four Thickness Gauge Models

The following table compares the models by their established product categories and general measurement objectives.

It does not imply that the models have identical technical performance.

ModelInstrument CategoryMain Measurement ObjectiveLandtek CM-8826FNCoating Thickness GaugeSuitable coating thickness over compatible substratesUNI-T UT343ECoating Thickness GaugeSuitable coating thickness over compatible substratesBenetech GM100+Ultrasonic Thickness GaugeThickness of suitable materialsLandtek TM-8812Ultrasonic Thickness GaugeThickness of suitable materials

Which Model Is Better?

There is no universally best model for every application.

A meaningful selection requires comparing the official specifications within the correct instrument category.

For example:

Compare CM-8826FN and UT343E when evaluating suitable coating thickness measurement.

Compare GM100+ and TM-8812 when evaluating suitable ultrasonic material thickness measurement.

Do not compare all four models solely by advertised measurement range or price.

The correct instrument category matters more than the model name.

9. Application Example - Measuring Paint Thickness on a Steel Structure

A metal fabrication company may need to inspect the protective paint thickness on a steel structure.

The inspection objective is to determine the thickness of the coating rather than the thickness of the steel itself.

In this situation, a suitable coating thickness gauge may be the appropriate instrument category.

Models to evaluate include:

Landtek CM-8826FN

UNI-T UT343E

However, the actual coating system, substrate, component geometry and inspection requirements must be confirmed.

A coating thickness measurement alone does not establish coating adhesion, surface preparation quality or complete coating system performance.

Other inspection activities may be required.

10. Application Example - Measuring Metal Pipe Wall Thickness

An industrial maintenance team may need to investigate possible wall thinning in a metal pipe.

The objective is to assess the thickness of the pipe material.

In this situation, an appropriate ultrasonic thickness gauge may be relevant.

Models to evaluate include:

Benetech GM100+

Landtek TM-8812

The suitability of either model depends on the actual pipe material, expected thickness, geometry, surface condition and measurement requirements.

A limited number of thickness readings should not be assumed to represent the minimum wall thickness of the entire piping system.

Engineering interpretation may require additional inspection information.

11. Application Example - Automotive Paint Inspection

Automotive inspection businesses may need to assess paint thickness on suitable vehicle panels.

The objective is generally related to the coating rather than the underlying metal thickness.

A suitable paint thickness gauge may be considered.

However, automotive panels may use different materials.

An instrument appropriate for one panel material may not be suitable for another.

Paint thickness differences also do not independently prove accident damage or repainting.

Buyers considering the UNI-T UT343E or Landtek CM-8826FN for automotive applications should confirm the actual substrate compatibility and measurement limitations.

12. Application Example - Industrial Equipment Maintenance

Industrial equipment may require several different inspection methods.

Consider a painted metal component that is being evaluated during maintenance.

The inspection team may have two separate questions.

Question 1: How Thick Is the Protective Coating?

A suitable coating thickness gauge may be relevant.

Question 2: How Thick Is the Underlying Metal Component?

An appropriate ultrasonic thickness gauge may be relevant.

These measurements serve different purposes.

A coating thickness gauge does not automatically measure the remaining metal wall thickness.

An ultrasonic thickness gauge does not automatically provide the separate thickness of a paint coating.

Some specialised ultrasonic methods may have different capabilities, but these must not be assumed for the GM100+ or TM-8812 without official verification.

13. Can an Ultrasonic Thickness Gauge Measure Through Paint?

This is a common question from industrial maintenance customers.

The answer depends on the instrument, coating, material and measurement method.

Some ultrasonic measurement systems are designed for particular through-coating applications.

However, through-coating capability must never be assumed for every ultrasonic thickness gauge.

For the Benetech GM100+ and Landtek TM-8812, buyers should verify the official manufacturer documentation and intended measurement procedure.

Important considerations include:

Coating material

Coating thickness

Substrate material

Instrument measurement principle

Supported instrument configuration

Applicable inspection requirements

An unsupported assumption about through-coating measurement can lead to unsuitable equipment selection.

14. Can a Coating Thickness Gauge Measure Metal Thickness?

A conventional coating thickness gauge is generally intended to measure suitable coating thickness over a compatible substrate.

It should not be treated as a general-purpose metal wall thickness gauge.

For example, a coating thickness gauge used on a painted steel component is not automatically measuring the thickness of the steel plate beneath the paint.

If the inspection requirement involves metal wall thickness, buyers should investigate an appropriate material thickness measurement method.

Coating thickness and substrate thickness are different measurement objectives.

15. How Substrate Material Affects Equipment Selection

Material compatibility is one of the most important buying considerations.

Steel and Other Ferrous Metals

Certain coating thickness measurement methods are designed for compatible coatings over ferrous metal substrates.

Ultrasonic material thickness measurement may also be relevant for suitable steel components.

However, the two methods measure different properties.

Aluminium and Other Non-Ferrous Metals

Coating thickness measurement may require an appropriate method for the substrate.

Ultrasonic thickness measurement suitability also depends on the material and instrument.

Plastic and Other Non-Metallic Materials

Do not assume that a conventional metal-substrate coating thickness gauge can measure coatings over plastic.

Similarly, not every ultrasonic thickness gauge is suitable for every non-metallic material.

Coated Metal Components

The coating and underlying material should be considered separately.

Always identify the coating, substrate and intended measurement objective before selecting an instrument.

16. Surface Condition and Measurement Limitations

Surface condition can affect both coating thickness and ultrasonic thickness measurement.

Potential challenges include:

Rough Surfaces

Surface irregularities may influence measurement suitability and consistency.

Curved Components

Curved surfaces may create additional measurement challenges.

Small Components

Limited measurement areas may restrict the suitability of a particular instrument.

Corroded Surfaces

Corrosion and pitting may create challenges for thickness assessment.

Coated Surfaces

Coatings may influence the applicable measurement method.

Irregular Geometry

Edges, corners and complex shapes may affect measurement conditions.

Environmental Conditions

Temperature and other environmental factors may influence instrument suitability.

The exact limitations depend on the instrument and its documented measurement method.

17. Accuracy and Measurement Range - What Should Buyers Compare?

Buyers frequently compare instruments using measurement range and accuracy.

These are important characteristics, but they should be considered only after selecting the correct instrument category.

Measurement Range

The expected coating or material thickness should fall within the documented capabilities of the selected instrument.

Measurement Performance

The required measurement tolerance should be compared with official manufacturer information.

Material Compatibility

The instrument must support the relevant coating-substrate combination or test material.

Geometry

The component must be suitable for the intended measurement method.

Inspection Requirements

Formal quality control and general maintenance screening may involve different requirements.

Documentation

The available measurement records and supporting documents should meet the customer's needs.

A larger advertised measurement range does not automatically mean that an instrument is better for a particular application.

18. Common Mistakes When Buying Thickness Gauges

Mistake 1: Confusing Paint Thickness with Metal Thickness

These are different measurement objectives and may require different instruments.

Mistake 2: Choosing by Brand Alone

Brand preference does not replace application-specific technical evaluation.

Mistake 3: Ignoring the Substrate

A coating thickness gauge must be suitable for the material beneath the coating.

Mistake 4: Assuming All Ultrasonic Gauges Support Through-Coating Measurement

This capability must be verified for the exact model and application.

Mistake 5: Ignoring Pipe Geometry

Pipe diameter, curvature and accessibility may affect measurement suitability.

Mistake 6: Assuming a Thickness Reading Confirms Equipment Safety

A thickness measurement alone does not establish fitness for continued operation.

Mistake 7: Comparing Different Instrument Categories Using Only Price

The correct measurement purpose should be established before evaluating purchasing cost.

Mistake 8: Ignoring Inspection Documentation Requirements

Some customers may need particular measurement records or quality control documentation.

Mistake 9: Assuming All Models Have Identical Features

Technical capabilities and configurations must be verified from official documentation.

Mistake 10: Purchasing Without Describing the Application

Providing the supplier with actual material and inspection information helps reduce the risk of selecting unsuitable equipment.

19. Thickness Gauge Buying Checklist Malaysia

Before purchasing a thickness gauge in Malaysia, answer the following questions.

1. What must be measured?

Paint, protective coating, metal wall thickness or another material characteristic?

2. What is the underlying material?

Steel, aluminium, another metal or a non-metallic material?

3. What is the expected thickness?

Identify the approximate thickness to be measured.

4. What is the inspection objective?

Manufacturing QA/QC, industrial maintenance, automotive inspection or another application?

5. What is the component geometry?

Flat plate, curved pipe, small component or irregular surface?

6. What is the surface condition?

Painted, coated, rough, corroded or otherwise challenging?

7. What measurement performance is required?

Identify the relevant inspection tolerance.

8. What documentation is required?

Determine whether the inspection involves particular records or supporting documents.

9. What are the working conditions?

Consider environmental and operational requirements.

10. Which instrument specifications apply?

Review the official manufacturer documentation before purchasing.

These questions help customers narrow the choice between coating thickness gauges and ultrasonic thickness gauges.

20. Which Thickness Gauge Should You Choose?

The correct choice depends on the measurement objective.

Choose a Coating Thickness Gauge Category When:

The main requirement is to evaluate suitable paint or protective coating thickness over a compatible substrate.

Models to investigate include:

Landtek CM-8826FN

UNI-T UT343E

Choose an Ultrasonic Thickness Gauge Category When:

The main requirement is to evaluate the thickness of a suitable material, such as a compatible metal plate or pipe wall.

Models to investigate include:

Benetech GM100+

Landtek TM-8812

Seek Further Technical Advice When:

The substrate material is uncertain

The coating system is unusual

The component has complex geometry

The inspection involves severe corrosion or pitting

The measurement must satisfy particular engineering requirements

The customer needs a specialised inspection method

The instrument's documented capabilities are unclear

Selecting the correct category is the first step. Selecting the correct model requires an application-specific comparison.

21. Industrial Applications in Malaysia

Different Malaysian industries may require different thickness measurement equipment.

Manufacturing

Manufacturing companies may need coating thickness inspection or material thickness quality control.

Metal Fabrication

Fabrication workshops may inspect protective coatings and suitable metal components.

Industrial Maintenance

Maintenance teams may investigate coating condition or material wall thinning.

Automotive

Automotive inspection and refinishing businesses may need suitable paint thickness measurement equipment.

Mechanical Engineering

Engineering companies may need material thickness information for selected components.

Industrial Construction

Contractors may need coating inspection equipment for suitable protective finishing applications.

Quality Assurance and Quality Control

QA/QC teams may need different instruments depending on the specified material characteristic.

The correct measurement method should always reflect the actual inspection requirements.

22. Why Contact MTM Precision Malaysia?

MTM Precision Sdn Bhd supplies industrial measuring and testing equipment to customers in Malaysia.

Customers can enquire about different thickness gauge categories, including:

Landtek CM-8826FN Coating Thickness Gauge

UNI-T UT343E Coating Thickness Gauge

Benetech GM100+ Ultrasonic Thickness Gauge

Landtek TM-8812 Ultrasonic Thickness Gauge

To help identify a suitable instrument, customers should provide:

Measurement objective

Coating or material type

Substrate information

Expected thickness

Component geometry

Surface condition

Measurement requirements

Intended application

MTM Precision can discuss the product enquiry and help clarify which instrument category should be evaluated.

Product availability and suitability should be confirmed before purchasing.

Frequently Asked Questions (FAQ)

Q1. What is the main difference between a coating thickness gauge and an ultrasonic thickness gauge?

A coating thickness gauge is generally used to assess suitable coating thickness over compatible substrates. An ultrasonic thickness gauge is generally used to assess the thickness of suitable materials.

Q2. Which instrument is suitable for measuring paint thickness on steel?

A compatible coating thickness gauge may be suitable. Buyers can evaluate models such as Landtek CM-8826FN or UNI-T UT343E after confirming official specifications.

Q3. Which instrument is suitable for measuring metal pipe wall thickness?

An appropriate ultrasonic thickness gauge may be relevant. Buyers can evaluate Benetech GM100+ or Landtek TM-8812 against the actual pipe and inspection requirements.

Q4. Can the Landtek CM-8826FN measure metal wall thickness?

The CM-8826FN is a coating thickness gauge model. It should not be treated as a general-purpose metal wall thickness gauge.

Q5. Is the UNI-T UT343E an ultrasonic thickness gauge?

No. The UNI-T UT343E belongs to the coating thickness gauge category.

Q6. Is the Benetech GM100+ a coating thickness gauge?

No. The Benetech GM100+ belongs to the ultrasonic thickness gauge category.

Q7. Is the Landtek TM-8812 suitable for pipe maintenance?

Pipe wall thickness measurement is a common ultrasonic inspection application. The suitability of the TM-8812 for a particular pipe must be confirmed from official documentation.

Q8. Can an ultrasonic thickness gauge measure through paint?

Some specialised measurement methods may support particular coated applications, but this capability must not be assumed for the GM100+ or TM-8812 without verification.

Q9. Can a coating thickness gauge measure coatings on aluminium?

Certain coating measurement methods may support compatible non-ferrous substrates. The exact instrument capabilities must be verified.

Q10. Can a coating thickness gauge detect internal pipe corrosion?

A conventional coating thickness gauge is not intended to determine internal pipe wall condition. Appropriate material inspection methods may be required.

Q11. Can ultrasonic thickness measurement confirm that a pipe is safe?

No. Thickness measurements may contribute to engineering assessment but do not independently establish complete pipe integrity or fitness for service.

Q12. Which is better, Landtek CM-8826FN or UNI-T UT343E?

Both are coating thickness gauge models. The better choice depends on official specifications, material compatibility, surface conditions and inspection requirements.

Q13. Which is better, Benetech GM100+ or Landtek TM-8812?

Both are ultrasonic thickness gauge models. Buyers should compare their documented capabilities against the actual material and inspection conditions.

Q14. Are coating thickness gauges suitable for automotive paint inspection?

They may be suitable for compatible automotive paint and substrate combinations. Vehicle panel material and instrument limitations must be considered.

Q15. Why do thickness readings vary between locations?

Variation may reflect actual thickness differences or factors involving material properties, surface condition, geometry and measurement conditions.

Q16. Can one thickness gauge measure every material?

No. Material compatibility and measurement principles vary between instruments.

Q17. What information should I provide when buying a thickness gauge?

Provide the measurement objective, material, coating or substrate, expected thickness, component geometry and relevant inspection requirements.

Q18. Where can I buy or enquire about thickness gauges in Malaysia?

Customers can contact MTM Precision Sdn Bhd for product information, availability confirmation and quotation enquiries.

Contact MTM Precision Sdn Bhd

Looking for a Coating Thickness Gauge or Ultrasonic Thickness Gauge in Malaysia?

Not sure whether you need the Landtek CM-8826FN, UNI-T UT343E, Benetech GM100+ or Landtek TM-8812?

Contact MTM Precision with your material and inspection requirements.

MTM Precision Sdn Bhd

Puchong Showroom & Service Centre

Address: No. 29-1 & 29-2, Jalan Bandar 18, Pusat Bandar Puchong, 47160 Puchong, Selangor, Malaysia.

Website: www.mtmpre.com.my

Email: mtmpre@yahoo.com

WhatsApp / Mobile: +6016-660 7346

Office Tel: +603-80807172

Product Enquiry: Contact MTM Precision for coating thickness gauge and ultrasonic thickness gauge product information, availability and quotation.

SEO Meta Description

Compare coating and ultrasonic thickness gauges in Malaysia. Explore Landtek, UNI-T and Benetech models for paint, metal and pipe inspection.

Internal Linking Suggestions

Connect this comparison guide to relevant MTM Precision website pages after verifying the correct URLs and publication status.

Landtek CM-8826FN - Coating Thickness Gauge Applications for Industrial Inspection Malaysia

UNI-T UT343E - Coating Thickness Gauge Buying Guide Malaysia

Benetech GM100+ - Ultrasonic Thickness Gauge for Metal Inspection Malaysia

Landtek TM-8812 - Ultrasonic Thickness Testing for Pipe Maintenance Malaysia

Landtek CM-8826FN Coating Thickness Gauge Malaysia - Product Page

UNI-T UT343E Coating Thickness Gauge Malaysia - Product Page

Benetech GM100+ Ultrasonic Thickness Gauge Malaysia - Product Page

Landtek TM-8812 Ultrasonic Thickness Gauge Malaysia - Product Page

Coating Thickness Gauge Malaysia - Product Category

Ultrasonic Thickness Gauge Malaysia - Product Category

Industrial Testing and Measuring Instruments Malaysia - Product Category

How to Choose an Ultrasonic Thickness Gauge Malaysia - Related Article

Contact MTM Precision Malaysia - Contact Page

Conclusion

Understanding the difference between a coating thickness gauge and an ultrasonic thickness gauge helps Malaysian industrial buyers select equipment that matches their inspection requirements.

A coating thickness gauge is generally selected for suitable paint or protective coating thickness measurement over compatible substrates.

Models to evaluate include the Landtek CM-8826FN and UNI-T UT343E.

An ultrasonic thickness gauge is generally selected for suitable material thickness measurement, including selected metal plate and pipe wall applications.

Models to evaluate include the Benetech GM100+ and Landtek TM-8812.

These instruments are not interchangeable, and the correct model depends on the material, surface condition, component geometry and required measurement performance.

Before purchasing, customers should verify the manufacturer's official specifications and confirm the intended inspection method.

For Coating Thickness Gauges and Ultrasonic Thickness Gauges in Malaysia, contact MTM Precision Sdn Bhd in Puchong, Selangor to discuss your application and equipment requirements.