Professional NOYAFA Optical Time Domain Reflectometer (OTDR) Series in Malaysia

In high-speed telecommunication networks, fiber-to-the-home (FTTH) infrastructure, data center interconnects, and long-haul optical fiber lines, precise characterization and rapid fault isolation are essential to maintaining network uptime. MTM Precision Sdn. Bhd. is proud to present the complete line of NOYAFA OTDR (Optical Time Domain Reflectometer) Series instruments in Malaysia. Engineered for fiber optic engineers, network contractors, telecom technicians, and IT infrastructure specialists, these advanced OTDR units offer long-distance testing capabilities, high dynamic ranges, event link analysis, and versatile optical-copper diagnostic suites.

Below is an extensive and detailed breakdown of each featured NOYAFA OTDR model, highlighting its technical specifications, operational features, and field applications.

1. NOYAFA NF-981 — Optical Time Domain Reflectometer

The NOYAFA NF-981 is a rugged handheld OTDR designed for routine fiber optic installation, link testing, and maintenance across medium to long-distance networks.

* 10 to 60 KM Testing Range: Capable of measuring optical fiber links across a testing distance ranging from 10 KM up to 60 KM.

* 1310/1550nm Dual Wavelength OTDR: Operates at standard 1310nm and 1550nm dual wavelengths with high measurement accuracy of ±0.2 dB/dB.

* Wide-Spectrum Optical Power Meter (OPM): Integrated OPM supporting wavelengths from 800nm to 1700nm, featuring a wide test range from -50 dBm to +26 dBm.

* High Sampling Resolution: Offers precise event sampling resolution ranging from 0.05 m to 8 m for pinpointing attenuation events.

* 10mW Visual Fault Locator (VFL): Built-in 10mW red laser VFL for instant visual identification of fiber breaks, tight bends, and connector faults.

2. NOYAFA NF-982 — 3-in-1 Advanced Touch Screen OTDR (NEW)

The NOYAFA NF-982 is a high-definition touch-screen OTDR platform that integrates long-haul fiber reflectometry with active network IP diagnostics and Power over Ethernet (PoE) testing.

* 150 KM Long-Range Testing: Supports dual-wavelength (1310/1550nm) OTDR testing extending up to 150 KM with an accuracy of ±0.05 dB.

* 5.5-Inch HD Touch Screen: Built with a bright 5.5-inch touch screen featuring 1280 x 720 resolution for clear trace viewing and interactive analysis.

* 10-Wavelength OPM: Features an Optical Power Meter supporting 10 calibrated wavelengths from 850nm to 1650nm with ±0.5 dB measurement accuracy.

* Active Network Diagnostic Suite: Equipped with IP Scan, Ping Scan, Port Flash, and DHCP Test functions for active network configuration and troubleshooting.

* Comprehensive PoE Test: Fully compatible with IEEE 802.3af, 802.3at, and 802.3bt standards for testing PoE switch output power and load performance.

3. NOYAFA NF-9818 — Multifunctional 6-in-1 OTDR (NEW)

The NOYAFA NF-9818 combines long-distance fiber OTDR measurement with structured copper cabling diagnostics into a compact, feature-packed handheld casing.

* Up to 80 KM OTDR Range: Provides a maximum OTDR testing range of up to 80 KM at 1310/1550nm dual wavelengths.

* High Dynamic Range & Short Dead Zone: Offers up to 24 dB dynamic range paired with a short 3 m event dead zone and 5 ns to 20 us pulse width range.

* Integrated OPM & Modulated Light Source: Features an OPM with a -70 to +6 dBm test range (850-1650nm) and an Optical Light Source with CW, 270 Hz, 1 kHz, and 2 kHz modulation.

* High-Power 30mW VFL: Built-in 650nm VFL delivering >= 30 mW output power for visual fault detection through thick cable jackets.

* 6-in-1 Multi-Tool Architecture: Combines OTDR, OPM, Optical Light Source, VFL, RJ45/RJ11 Wire Mapping, and Inductive Cable Tracing up to 600 meters.

4. NOYAFA NF-9816 — Flagship 16-in-1 Intelligent OTDR

The NOYAFA NF-9816 is a flagship 16-in-1 diagnostic suite built for total fiber-copper infrastructure analysis, featuring intelligent link mapping and high-speed optical power detection.

* 16 Functions for OTDR Test: Houses 16 distinct testing and diagnostic tools within a single industrial-grade unit.

* 10G Split-Wave Optical Power Meter: Built-in 10G split-wave OPM for measuring high-speed optical signal levels.

* Built-in Auto-OTDR & Event Map: Features an Auto-OTDR function paired with intelligent Event Map link analysis, displaying fiber events as simple visual icons instead of complex traces.

* Integrated Copper Cable Diagnostics: Fully supports Network Cable Continuity Testing, Network Cable Length Measurement, and Network Cable Tracking.

* High-Capacity Power: Powered by an eco-friendly rechargeable Lithium Battery for extended field operations.

Why Choose MTM Precision in Malaysia?

At MTM Precision Sdn. Bhd., we supply genuine NOYAFA diagnostic instruments, backed by local warranty coverage, technical support, showroom demonstrations, and reliable after-sales service for engineering projects across Malaysia.

Contact MTM Precision

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

Website: www.mtmpre.com.my

Email: mtmpre@yahoo.com

WhatsApp: +6016-660 7346

Office Tel: +603-80807172