Professional Fuzrr FR3010E Ground Resistance Soil Resistivity Tester in Malaysia

For geological survey engineering, sub-station ground grid design, soil resistivity profiling, lightning protection compliance, and telecommunications earth electrode installation, precise multi-wire grounding diagnostics are critical. MTM Precision Sdn. Bhd. is proud to present the official Fuzrr FR3010E Ground Resistance Soil Resistivity Tester (also known as the four-wire grounding resistance meter) in Malaysia.

The Fuzrr FR3010E incorporates advanced microprocessor technology and fast filtering algorithms to minimize field signal interference. Capable of performing 2-wire, 3-wire, and 4-wire testing, the FR3010E measures ground resistance up to 30.00kΩ, soil resistivity up to 9999kΩm (using the 4-pole Wenner method),and ground AC voltage up to 600V. Equipped with configurable electrode spacing (1m to 100m), 500-group data logging, and an IP45-rated dust and splash-proof housing, the FR3010E is a next-generation instrument replacing traditional hand-cranked testers.

Below is an extensive technical breakdown of the product introduction, key features, applications, and detailed specifications for the FR3010E model, presented cleanly in plain text without tables or citations.

Product Applications

Soil resistivity profiling and earth grid design for electrical sub-stations and power transmission towers
Telecommunications base station 4-wire ground electrode system evaluation
Geological exploration, civil engineering site planning, and soil structure analysis
Lightning protection system grounding resistance measurement for high-rise buildings and industrial plants
Petroleum refineries, chemical pipelines, and gas station equipotential grounding checks

Key Features & Operational Advantages

Multi-Wire Versatile Testing Modes: Supports 2-wire simple testing, 3-wire precision testing, and 4-wire soil resistivity testing.
Wide Ground Resistance & Soil Resistivity Range: Measures ground resistance from 0.00Ω up to 30.00kΩ and soil resistivity from 0.00Ωm to 9999kΩm with automatic range shifting.
Configurable Auxiliary Electrode Spacing: Allows electrode spacing setting between 1m and 100m for accurate soil resistivity calculations (ρ = 2πaR method).
Advanced Anti-Interference Filtering: Fast filtering technology suppresses earth voltage noise and high-frequency stray signals during measurement.
500-Group Data Logging Memory: Stores up to 500 sets of test data with "MEM" storage indicators and "FULL" memory alert symbol.
Clear 4-Bit Backlit LCD Screen: Large 108mm x 65mm display with gray-white controllable backlight for easy reading in low-light environments.
Integrated Safety & Alarm System: Audible alarm when measured values exceed preset limits, overflow OL display, and line voltage safety monitoring below AC 600V.

Technical Specifications — Fuzrr FR3010E

Core Measurement Parameters

Ground Resistance Range: 0.00Ω to 30.00kΩ (Resolution: 0.01Ω; Accuracy: ±2% rdg ± 5dgt)
Soil Resistivity Range: 0.00Ωm to 9999kΩm (Resolution: 0.01Ωm; Accuracy: calculated via ρ = 2πaR)
Ground Voltage Range: AC 0.00V to 600V (Resolution: 0.01V; Accuracy: ±2% rdg ± 3dgt)
Testing Frequency: 128Hz
Short Circuit Test Current: AC > 20mA
Open Circuit Test Voltage: AC 30V Max
Auxiliary Electrode Spacing Range: Configurable setting from 1m to 100m
Measurement Method (Resistance): Rated current change pole method, test current 20mA Max
Measurement Method (Resistivity): Quadrupole / 4-pole method
Measurement Method (Ground Voltage): Average value rectification method (S-ES interface)

Functional Features & Data Management

Range Shift: Automatic range shifting for ground resistance and soil resistivity
Data Storage: 500 groups ("MEM" storage instruction; flashing "FULL" symbol when memory is full)
Overflow Display: Exceed measurement range overflow function displaying "OL" symbol
Alarm Function: Audible alarm when measured value exceeds pre-set alarm value
Automatic Shutdown: Automatically powers off after approximately 15 minutes of inactivity
Ground Voltage Limitation: Measures line voltage below AC 600V (Note: Ground voltage mode cannot be used to measure commercial AC power grid supply)

Hardware, Accessories & Physical Parameters

Power Supply: 6 x 1.5V Alkaline Batteries (LR14 / C-cell, 6 pieces)
Display Mode: 4-bit large LCD display with controllable gray-white backlight
LCD Field Dimensions: 108mm x 65mm
Meter Physical Dimensions: Length 240mm x Width 188mm x Height 85mm
Measurement Status Indicator: LED blinking during active measurement
Standard Test Lines: 4 precision test lines (Red 15m, Black 15m, Yellow 10m, Green 10m, 1 strip each)
Easy Test Lines: 2 simple test lines (Yellow 1.5m, Green 1.5m, 1 strip each)
Power Consumption: Standby 40mA Max (backlight off); Backlight turned on 43mA Max; Measuring 120mA Max (backlight off)
Total Weight: Main instrument 1280g (including battery); Test accessory package 890g (including simple test line)
Ingress Protection Rating: IP45
Production Compliance & Safety Ratings: IEC61010-1, CAT III 300V, CAT IV 150V, IEC61010-031,IEC61557-1, IEC61557-5, JJG 366-2004, Pollution Grade 2

Why Choose MTM Precision in Malaysia?

At MTM Precision Sdn. Bhd., we supply genuine Fuzrr ground resistance, soil resistivity, and industrial testing instruments across Malaysia, backed by local warranty coverage, technical support, calibration assistance, and reliable after-sales service.

Contact MTM Precision

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

Website:

www.mtmpre.com

.my

Email: mtmpre@yahoo.com

WhatsApp: +6016-660 7346

Office Tel: +603-80807172