Professional Fuzrr ES2010+ Double Clamp Phase VA Meter (Malaysia)

For power system engineers, substation technicians, electricity inspection departments, and industrial maintenance specialists performing on-site vector analysis, high-precision multi-parameter verification is essential. MTM Precision Sdn. Bhd. is proud to present the official Fuzrr ES2010+ Double Clamp Phase VA Meter in Malaysia.

The Fuzrr ES2010+ is a high-quality, multi-functional, high-precision handheld digital phase voltmeter designed for simultaneous on-site measurement of AC voltage, AC current, phase angle, and frequency.Equipped with dual tip-shaped current clamps (Φ8mm), manual range shifting, a large-capacity rechargeable lithium battery, and a 72mm x 55mm LCD screen, the ES2010+ enables technicians to judge inductive and capacitive circuits, check transformer wiring groups, verify watt-hour meter wiring correctness, and test secondary circuit differential protection systems.

Below is an extensive technical breakdown of the product applications, key features, and detailed specifications for the ES2010+ model, presented cleanly in plain text without tables or inline citation markers.

Product Applications

On-site vector analysis and measurement of three-phase AC voltage, current, phase, and frequency
Transformer wiring group verification, inductive/capacitive circuit discrimination, and secondary circuit testing
Electricity meter (watt-hour meter) wiring correctness inspection and fault troubleshooting
Relay protection testing, differential protection group phase relationship readouts, and busbar protection checks
Industrial power quality inspection, electrical equipment repair, and power plant maintenance

Key Features & Operational Advantages

Simultaneous Multi-Parameter Measurement: Measures AC voltage (up to 600V), AC current (up to 20.0A), phase angle (0.0° to 360.0°), and frequency (45.00Hz to 65.00Hz) concurrently.
Dual Tip-Shaped Current Clamps: Supplied with two compact Φ8mm tip-shaped current clamps for easy access in crowded wiring cabinets and tight terminal blocks.
Phase Angle & Wiring Group Verification: Accurately determines phase relationships between voltage and current, verifying inductive/capacitive loads and transformer vector groups.
Rechargeable Lithium Battery with Long Runtime: Powered by a built-in DC 3.7V lithium battery offering over 12 hours of continuous operation with backlight enabled.
Clear LCD Screen with Backlight: Features a 72mm x 55mm display screen with controllable backlight for clear viewing in dark substations and night-time inspections.
Rugged IP45 Protection & Safety Standards: Housed in an IP45 dust and splash-proof enclosure with a protective silicone cover, complying with IEC61010-1 CAT III 600V safety standards.

Technical Specifications — Fuzrr ES2010+

Core Measurement Parameters

Primary Functions: Measure three-phase AC voltage, current, voltage phase, current phase, voltage and current phase, frequency; judge transformer wiring group, inductive/capacitive circuit; test secondary circuit and busbar protection system; read out phase relationships of differential protection groups; check watt-hour meter wiring correctness
Voltage Range: AC 0.00V to 600V (Resolution: 0.01V; Accuracy: ±0.5% FS)
Current Range: AC 0.0mA to 20.0A (Resolution: 0.1mA; Accuracy: ±0.5% FS)
Phase Range: 0.0° to 360.0° (Resolution: 0.1°; Accuracy: ±1°)
Frequency Range: 45.00Hz to 65.00Hz (Resolution: 0.01Hz; Accuracy: ±0.5% FS)
Detection Rate: Approximately 2 times/second
Test Mode: Manual range shift

Functional Features & Power Management

Data Hold: Press HOLD key to freeze readings during test ("H" symbol display)
Automatic Shut-Down: Automatically powers off after approximately 15 minutes of inactivity
Backlight Function: Controllable display backlight suitable for dark places and night use
Voltage Detection: Low battery symbol appears when supply voltage drops below 3.2V
Power Supply: Built-in DC 3.7V rechargeable lithium battery with charging function
Power Consumption: Backlight on consumes up to 30mA (battery lasts over 12 hours of continuous use)

Hardware, Physical & Environmental Parameters

Display Screen: LCD display, 72mm x 55mm viewing area
Current Clamp Jaw Size: Φ8mm (tip-shaped)
Input Impedance: Test voltage input impedance is 1MΩ
Pressure Resistance (Dielectric Strength): Withstands 1000V / 50Hz sine wave AC voltage between instrument circuit and housing for 1 minute
Insulation Resistance: ≥ 100MΩ between instrument line and housing
Instrument Dimensions: Length 187mm x Width 119mm x Height 48mm
Test Line Lengths: Voltage test line length: 1.5m; Current clamp line length: 2m
Protective Enclosure: Equipped with silicone protective cover
Weights: Host meter: 362g (including battery); Tip-shaped current clamp: 180g x 2; Test lines: 190g
Ingress Protection Rating: IP45
Production Compliance & Safety Standards: IEC61010-1 CAT III 600V, IEC61010-031, IEC61326,Pollution Grade 2

Why Choose MTM Precision in Malaysia?

At MTM Precision Sdn. Bhd., we supply genuine Fuzrr phase VA meters and electrical testing instruments across Malaysia, backed by local warranty coverage, technical support, calibration services, and reliable after-sales assistance.

Contact MTM Precision

MTM Precision Sdn. Bhd.

Showroom & Service Centre

No. 29-1 & 29-2, Jalan Bandar 18,

Pusat Bandar Puchong,

47160 Puchong, Selangor, Malaysia

Website:

www.mtmpre.com

.my

Email: mtmpre@yahoo.com

WhatsApp: +6016-660 7346

Office Tel: +603-80807172