Power Quality Diagnostics & Electrical Safety Protection: PEAKMETER MS2205 Harmonic Power Clamp Meter & MS5909 Leakage Switch Tester in Malaysia

Power Quality Diagnostics & Electrical Safety Protection: PEAKMETER MS2205 Harmonic Power Clamp Meter & MS5909 Leakage Switch Tester in Malaysia

In Malaysia’s modern commercial buildings, manufacturing plants, data centers, and industrial facilities,electrical systems face two critical operational priorities: maintaining clean, efficient power quality and ensuring life-saving earth-leakage protection. With the widespread adoption of variable frequency drives (VFDs), LED lighting, server racks, and automated machinery, harmonic distortion has become a major hidden culprit behind overheating transformers, nuisance breaker trips, and inflated electricity bills. At the same time,residual current devices (RCDs / ELCBs) must be regularly verified to guarantee they trip within milliseconds during an earth fault to protect personnel from electric shock.
 
To give electrical engineers, energy auditors, facility managers, and safety inspectors complete diagnostic control over both power efficiency and circuit protection, PEAKMETER provides two specialized field instruments: the PEAKMETER MS2205 Digital Harmonic Power Clamp Meter and the PEAKMETER MS5909 Single-Phase / Three-Phase Leakage Switch Tester. Engineered for accuracy, safety, and everyday practicality, these instruments bring laboratory-grade insight directly to distribution boards across Malaysia.
 

Diagnosing Energy Efficiency & Harmonic Distortion with the PEAKMETER MS2205

Modern non-linear loads distort electrical waveforms, leading to wasted energy, poor power factor, and premature equipment wear. Instead of relying on bulky, complex power analyzers for routine troubleshooting,the PEAKMETER MS2205 packs comprehensive single-phase and three-phase power and harmonic analysis into a portable handheld clamp meter.
 
  • Complete Power & Energy Visibility: Capable of clamping around large industrial conductors with its generous 50mm jaw opening, the MS2205 measures AC Current up to 1000A, AC Voltage up to 600V,Single-Phase and Three-Phase Active Power up to 600kW, Reactive Power up to 600kVAr, and Power Factor (0.3 to 1). This allows facility teams to audit motor loads, identify phase imbalances, and spot power factor penalties before they impact utility costs.
  • In-Depth Harmonic Analysis (Up to the 20th Order): Equipped with True RMS measurement across a 45Hz–65Hz fundamental frequency, the MS2205 analyzes harmonic components from Harmonic No. 1 all the way through Harmonic No. 20. Maintenance engineers can immediately pinpoint whether distorted currents are stressing neutral conductors, transformers, or sensitive automation controls.
  • Built for Field Logging & PC Reporting: Featuring a crisp 6000-count backlit display, Data Hold,Auto Ranging, on-board data logging and recall for up to 100 groups, and an RS232 interface for transferring captured measurements to a computer, the MS2205 streamlines energy audits and preventive maintenance documentation.
  • Industrial Safety Compliance: Built to meet EN61010-1, EN61010-2-032, and EN61326 standards with a CAT III 600V safety rating and CE/RoHS compliance, it delivers reliable, rugged performance powered by four standard 1.5V AA batteries.

Verifying Life-Saving RCD Protection with the PEAKMETER MS5909

Residual Current Devices (RCDs) and leakage switches are the frontline defense against electrocution and electrical fires in residential, commercial, and industrial installations. However, dust, humidity, and aging mechanical linkages can cause an RCD to become sluggish—or fail to trip altogether—without any outward sign. The PEAKMETER MS5909 allows licensed wiremen, safety officers, and maintenance teams to thoroughly verify single-phase and three-phase protection systems in minutes.
 
  • Universal Single-Phase & Three-Phase Compatibility: Unlike basic socket testers limited to single-phase outlets, the MS5909 supports Single-Phase (180V–264V) two-wire and three-wire systems as well as Three-Phase (360V–440V) three-wire and four-wire systems—making it ideal for commercial main switchboards, factory machinery panels, and residential distribution boxes alike.
  • Comprehensive Trip-Time & Ramp-Current Testing: Covering standard rated residual operating currents of 10mA, 20mA, 30mA, 100mA, 200mA, 300mA, and 500mA, the MS5909 performs x1/2 non-trip verification, x1, x2, and x5 fast-trip timing tests, and Auto Ramp slope testing (stepping from 40% to 110% of rated leakage current) to pinpoint the exact current level and response time at which a breaker trips. Selectable 0° and 180° phase angles ensure worst-case half-cycle testing accuracy.
  • Built-In Safety Safeguards & Wiring Diagnostics: Before injecting any test current, the MS5909 performs automatic wiring inspection, AC voltage measurement (30V–440V), fault voltage (Uf) detection, and over-temperature protection—preventing hazardous touch voltages from developing on protective earth conductors during testing.
  • Efficient Field Workflow: Housed in a shock-resistant protective casing with a large backlit LCD, storage for up to 99 sets of test data, low battery detection, and auto shutdown, the MS5909 simplifies compliance testing and periodic safety certification across Malaysia.

Elevate Electrical Maintenance & Safety Compliance in Malaysia

Whether your team is auditing energy consumption and harmonic distortion in a manufacturing facility or certifying RCD trip times across commercial and industrial switchboards, MTM Precision Sdn. Bhd. provides genuine PEAKMETER test and measurement instruments backed by local showroom support, technical advice, and reliable after-sales service in Malaysia.
 
Contact MTM Precision
 
MTM Precision Sdn. Bhd.
 
Showroom & Service Centre
 
No. 29-1 & 29-2, Jalan Bandar 18,
 
Pusat Bandar Puchong,
 
47160 Puchong, Selangor, Malaysia
 
Website: www.mtmpre.com.my
 
Email: mtmpre@yahoo.com
 
WhatsApp: +6016-660 7346
 
Office Tel: +603-80807172

16 Nov 2026