Specialized LCR Component Analysis & 1700V High-Voltage Power Diagnostics: PEAKMETER Digital Multimeters in Malaysia

Specialized LCR Component Analysis & 1700V High-Voltage Power Diagnostics: PEAKMETER Digital Multimeters in Malaysia

Across Malaysia’s electronics manufacturing plants, solar photovoltaic farms, R&D laboratories, and industrial maintenance operations, technicians and engineers routinely encounter two very different—yet equally demanding—diagnostic challenges. On the electronics bench and production line, verifying passive components such as inductors, high-value capacitors, and Equivalent Series Resistance (ESR) requires dedicated LCR measurement precision. Meanwhile, out in the field on commercial and utility-scale solar arrays or high-voltage DC power systems, engineers need rugged instruments rated well beyond standard 1000V limits.
 
To deliver specialized laboratory-grade component testing alongside high-voltage solar and industrial power diagnostics, PEAKMETER introduces three advanced, safety-certified handheld instruments: the PEAKMETER PM8246 Digital Multimeter with LCR, the PEAKMETER PM5318 LCR Tester, and the PEAKMETER PM8250 1700V Digital Multimeter. Engineered with 6000-count backlit displays, rugged protective holsters, and intuitive field features, these meters provide reliable performance tailored to professionals across Malaysia.
 

Why Dedicated LCR & 1700V High-Voltage Instruments Matter Today

Standard digital multimeters can check basic resistance and simple capacitance, but they fall short when engineers need to evaluate inductance, Dissipation Factor (D), Quality Factor (Q), or capacitor ESR at selectable test frequencies (100Hz to 10kHz). Carrying a separate benchtop LCR bridge into the field is impractical—making a handheld LCR multimeter an indispensable troubleshooting tool.
 
At the same time, modern solar PV strings and industrial DC power architectures increasingly operate at voltages exceeding 1000V DC. Using an under-rated meter creates severe safety hazards, whereas a dedicated 1700V DC True RMS multimeter with Low-Pass Filter (LPF) capability ensures accurate, safe measurements across both high-voltage DC arrays and noisy inverter outputs.
 

PEAKMETER PM8246 & PM5318: Precision Handheld LCR Component & Multi-Parameter Diagnostics

Featuring a crisp 6000-count dual display, selectable Series/Parallel (SER/PAL) equivalent circuit modes,and Auto LCR Smart Check and Measuring, the PEAKMETER PM8246 and PEAKMETER PM5318 bring laboratory component diagnostics directly into the technician’s hand:
 
  • Comprehensive LCR & ESR Analysis: Both models measure inductance from 600uH up to 200H,capacitance from 600pF up to 6mF, and resistance up to 20 mega-ohms across four selectable test frequencies (100Hz, 120Hz, 1kHz, and 10kHz) using a 0.5Vrms measuring signal—simultaneously evaluating L / C / R / DCR / Q / D / ESR parameters on the dual LCD screen.
  • PEAKMETER PM5318 (Dedicated Handheld LCR Tester): Streamlined specifically for electronics engineers, quality-control inspectors, and repair technicians who focus on rapid, high-precision passive component sorting, circuit board debugging, and duty cycle (5%–95%) verification.
  • PEAKMETER PM8246 (All-In-One Digital Multimeter + Full LCR Tester): Combines every LCR diagnostic capability of the PM5318 with a complete 1000V AC/DC digital multimeter—adding DC and AC voltage up to 1000V, AC/DC current up to 600mA, frequency up to 5MHz, and temperature measurement from -20°C to 1000°C (-4°F to 1832°F), alongside diode and audible continuity checks.
  • Field-Ready Ergonomics & Safety: Both models include Data Hold, Relative mode, display backlight,auto power-off, and EN 61010-1 / CAT III 1000V safety certification.

PEAKMETER PM8250: Heavy-Duty 1700V True RMS Digital Multimeter for Solar & Industrial Power

Built for solar photovoltaic engineers, renewable energy contractors, and high-voltage industrial maintenance teams, the PEAKMETER PM8250 1700V Digital Multimeter delivers high-voltage headroom, waveform filtering, and rugged durability in a 6000-count backlit housing with an integrated analog bar graph:
 
  • Extended 1700V DC & 1000V AC True RMS Measurement: Safely measures DC voltage all the way up to 1700V and AC voltage up to 1000V, providing the high-voltage range required for commissioning commercial and utility solar PV strings, combiner boxes, and high-voltage DC buses.
  • LPF Filtering & AC Peak Capture: Equipped with Low-Pass Filter (LPF) mode to accurately measure fundamental voltage and frequency on variable frequency drives (VFDs) and solar inverters, paired with MAX/MIN and AC Peak capture for tracking transient surges.
  • Wide Capacitance, Frequency & Thermal Diagnostics: Measures capacitance up to 100 millifarads (100mF), resistance up to 60 mega-ohms, AC/DC current up to 600mA, frequency from 10Hz to 10MHz,duty cycle (1%–95%), and K-type thermocouple temperature from -20°C to 1000°C (-4°F to 1832°F).
  • Complete Field Safety & Convenience: Includes Non-Contact Voltage (NCV) detection, diode and audible continuity testing, Relative mode, Data Hold, and EN 61010-1 CAT III 1000V certification.

Equipping Malaysian Engineers with Specialized PEAKMETER Instruments

Whether your work centers on precision component-level troubleshooting with the PEAKMETER PM8246 / PM5318 LCR series or high-voltage 1700V DC solar and industrial diagnostics with the PEAKMETER PM8250, PEAKMETER delivers accuracy, durability, and certified safety for demanding technical workflows.
 
For businesses, electronics manufacturers, solar contractors, and resellers across Malaysia looking for genuine PEAKMETER testing equipment, technical consultation, and responsive local support, MTM Precision Sdn. Bhd. is ready to assist you.
 
Contact MTM Precision
 
MTM Precision Sdn. Bhd.
 
Showroom & Service Centre
 
No. 29-1 & 29-2, Jalan Bandar 18,
 
Pusat Bandar Puchong,
 
47160 Puchong, Selangor, Malaysia
 
Website: www.mtmpre.com.my
 
Email: mtmpre@yahoo.com
 
WhatsApp: +6016-660 7346
 
Office Tel: +603-80807172

16 Nov 2026