FNIRSI Malaysia: Industrial Signal Calibrators, Programmable DC Power Supplies & Network Cable Trackers

FNIRSI Malaysia: Industrial Signal Calibrators, Programmable DC Power Supplies & Network Cable Trackers

 
In Malaysia’s rapidly expanding industrial automation, electronics manufacturing, and IT infrastructure sectors,reliable calibration, clean power delivery, and fast network diagnostics are critical to keeping operations running without interruption. From PLC instrumentation commissioning in Selangor’s industrial parks and PCB prototyping in Penang’s R&D centers to structured cabling and data center maintenance in Kuala Lumpur and Johor, engineers and technicians need precision instruments that simplify complex testing tasks. FNIRSI delivers an intelligent suite of signal generators, programmable DC power supplies, and multi-function cable trackers engineered to boost accuracy, protect sensitive electronics, and accelerate on-site troubleshooting.
 
Industrial Signal Generators & Process Calibrators: Precision Loop & Sensor Simulation
 
Process control engineers and factory instrumentation technicians rely on accurate signal simulation to test PLC inputs, valves, transmitters, and temperature controllers before commissioning or during fault isolation.FNIRSI’s handheld process calibrators pack laboratory-grade signal generation into rugged, field-ready devices powered by a built-in 3.7V/3000mAh rechargeable battery for all-day portability:
 
  • SG-003A Multifunctional Signal Generator & Process Calibrator: Designed for everyday industrial loop testing, the SG-003A outputs an adjustable 0–24V voltage signal, a 0–24mA current loop simulator,and a pulse wave generator spanning 0–9999Hz. Whether calibrating analog sensors, testing proportional valves, or verifying frequency counters on a production line, technicians can simulate standard industrial control signals effortlessly without carrying bulky bench equipment.
  • SG-004A Advanced Process & Temperature Calibrator: Building upon the full voltage, current (0–24mA), and pulse generation (0–9999Hz) capabilities of the SG-003A, the SG-004A adds comprehensive thermal sensor simulation. It supports thermal resistance calibration—including Pt100 (-200 to 650°C),CU50 (-20 to 150°C), resistance (0–390Ω), and WRE25/26—alongside thermocouple (mV) simulation across types TC-S, B, K, R, J, T, and N. This makes the SG-004A an indispensable single-hand diagnostic powerhouse for process plants, HVAC control systems, and thermal manufacturing facilities across Malaysia.
Programmable DC Power Supplies: Clean, High-Precision Power for R&D & Repair
 
Whether powering delicate microcontroller prototypes, testing automotive modules, or diagnosing short circuits on mobile and laptop motherboards, an unstable power supply can ruin sensitive components. FNIRSI’s programmable DC power supplies combine crisp real-time telemetry displays with tight regulation and 8 layers of built-in circuit protection:
 
  • IPS3608 High-Power Benchtop DC Power Supply: Delivering up to 0–36V and 0–8A for a total output of 288W, the IPS3608 gives R&D labs, repair workshops, and production test benches ample headroom for demanding loads. It features ultra-fine setting resolution of 0.01V and 0.001A, high readback precision (voltage within ±0.3% + 3 digits; current within ±0.15% + 5 digits), and an intuitive color interface showing live voltage, current, and power curves. Complete with 8 safety protections and a PD100 plug, it handles everything from high-current motor testing to precision board-level diagnostics.
  • DPS150 & DPS150 PD Ultra-Compact Programmable DC Power Supplies: Packing 150W of clean,regulated power (0–30V, 0–5A) into a remarkably compact, desk-saving chassis, the DPS150 series is ideal for electronics engineers, field technicians, and educational laboratories. With high setting precision (0.1% ± 5mV and 0.1% ± 3mA), low output ripple, accurate input/output readback monitoring, and 8 comprehensive safety protections, it delivers rock-solid stability. For technicians who require maximum portability, the DPS150 PD variant includes a PD100 plug, allowing you to power your bench supply directly from high-wattage USB-C PD chargers or power banks anywhere on site.
LPM-10 A/B/C Multi-Function Cable Trackers: Complete Network & Cabling Diagnostics
 
Network engineers, CCTV installers, and IT maintenance teams frequently waste valuable hours tracing unlabeled cables, diagnosing intermittent Ethernet drops, or verifying PoE power delivery. The FNIRSI LPM-10 series (available in A, B, and C configurations) consolidates 10 essential cabling and network diagnostic functions into one ergonomic, anti-interference handheld kit:
 
  • 10-in-1 Cabling & Network Intelligence: The LPM-10 performs interference-free cable tracing, exact cable length testing, RJ45 connector pinout testing, network cable speed verification, switch port flashing for instant rack identification, cable pairing, and live PoE supply testing to confirm voltage and power standards before connecting IP cameras or access points.
  • Built-In Safety & Field Convenience: Equipped with Non-Contact Voltage (NCV) detection to alert technicians to live electrical wires and an integrated LED flashlight for dark server racks or ceiling voids,the LPM-10 keeps field work safe and efficient. Depending on the selected model variant (A, B, or C),users can also benefit from expanded fiber-optic testing capabilities such as an Optical Power Meter (OPM) and Visual Fault Locator (VFL), making it a complete copper-and-fiber diagnostic solution for Malaysian telecom and IT contractors.
Why Malaysian Engineers, System Integrators & Workshops Choose FNIRSI
 
  • Precision That Protects Your Equipment: High readback accuracy, clean regulated power output, and 8-layer protection circuits prevent accidental over-voltage or over-current damage during R&D and repair work.
  • True Portability Without Compromise: From battery-powered process calibrators to PD-powered 150W bench supplies and all-in-one network trackers, FNIRSI instruments fit effortlessly into mobile engineering toolkits.
  • Faster Commissioning & Minimal Downtime: Combining multiple test functions into intuitive, color-screen instruments eliminates tool-swapping delays in factories, data centers, and commercial buildings.
Source Genuine FNIRSI Instruments in Malaysia
 
Upgrade your engineering workbench, factory maintenance team, or IT field toolkit with reliable testing,calibration, and power solutions. Visit our showroom in Puchong, Selangor to explore FNIRSI’s range of signal calibrators, programmable DC power supplies, and network cable testers, or reach out to our team for product consultations, technical specifications, and quotations.
 
Contact MTM Precision
 
MTM Precision Sdn. Bhd.
 
Showroom & Service Centre
 
No. 29-1 & 29-2, Jalan Bandar 18,
 
Pusat Bandar Puchong,
 
47160 Puchong, Selangor, Malaysia
 
Website: www.mtmpre.com.my
 
Email: mtmpre@yahoo.com
 
WhatsApp: +6016-660 7346
 
Office Tel: +603-80807172

17 Nov 2026