FNIRSI Malaysia: Deep-Dive Technical Guide to the FNIRSI 2C23T Handheld 3-in-1 10MHz Dual-Channel Oscilloscope, 10,000-Count True-RMS Multimeter & 2MHz Waveform Generator

FNIRSI Malaysia: Deep-Dive Technical Guide to the FNIRSI 2C23T Handheld 3-in-1 10MHz Dual-Channel Oscilloscope, 10,000-Count True-RMS Multimeter & 2MHz Waveform Generator

 
For electronics students, mobile service technicians, maintenance engineers, and hardware hobbyists across Malaysia, choosing a versatile handheld instrument means looking closely at the underlying specifications that govern real-world measurement reliability. The FNIRSI 2C23T packs three distinct diagnostic instruments into a sleek, blue-and-black handheld chassis weighing just 300g. Combining a 10MHz dual-channel oscilloscope, a 2MHz waveform generator, and a 4-digit (10,000-count) True-RMS multimeter, it delivers dependable everyday testing performance backed by intelligent anti-burning protection and firmware upgrade support.
 
10MHz Dual-Channel Digital Oscilloscope
 
Engineered for clear waveform visualization across low-frequency control circuits, audio stages, and switching power supplies, the 2C23T’s oscilloscope section balances ease of use with essential analytical features:
 
  • Bandwidth, Sampling & Memory: Features 2 independent input channels with a 10MHz analog bandwidth, a 50MSa/s real-time sampling rate, and a 32kpts memory depth.
  • Sensitivity, Time Base & Triggering: Vertical sensitivity spans from 20mV/div to 10V/div with a standard 1MΩ input impedance, while the time base scale ranges from 50ns/div to 10s/div. It supports Auto, Normal, and Single trigger modes to capture both continuous and transient waveforms reliably.
  • 12 Automatic Measurements: Technicians and students can read key signal parameters instantly without manual grid counting, including Max, Min, Avg, RMS, Peak, Peak-to-Peak, Frequency, Cycle, positive/negative pulse widths (Time+, Time-), and positive/negative duty cycles (Duty+, Duty-).
Built-In 2MHz Function & Waveform Generator
 
Eliminating the need to carry a separate benchtop signal source, the 2C23T integrates a single-channel Direct Digital Synthesis (DDS) waveform generator running at a 100MSa/s sampling rate with 1Hz frequency resolution, 8-bit vertical resolution, and a 512pts wave length. Users can output frequencies up to 2MHz across 7 standard waveform types—sine, square, triangle, half-wave, full-wave, noise wave, and DC signal—making circuit stimulation and educational lab experiments fast and convenient.
 
4-Digit (10,000-Count) True-RMS Digital Multimeter
 
Beyond waveform viewing, the integrated 10,000-count True-RMS multimeter handles comprehensive electrical diagnostics across workshop and field environments:
 
  • Voltage & Current Ranges: Measures DC voltage from 9.999V up to 999.9V (±(0.5%+3)) and AC voltage from 9.999V up to 750.0V (±(1%+3)), alongside microamp-to-ampere DC and AC current testing from 9999µA up to 9.999A.
  • Resistance, Capacitance & Frequency: Delivers high-resolution resistance testing from 999.9Ω up to 99.99MΩ, wide-range capacitance measurements from 9.999nF up to 99.99mF, and frequency readings from 9.999Hz up to 9.999MHz.
  • Temperature & Essential Safety Functions: Supports wide-range temperature measurements from -55°C to 1300°C (-67°F to 2372°F), dedicated Diode testing, audible Continuity checks, Non-Contact Voltage (NCV) detection, and Live wire identification.
Compact Ergonomics, 6-Hour Endurance & Ready-to-Use Accessories
 
Measuring just 167×89×35mm and weighing 300g, the FNIRSI 2C23T features a sharp 2.8-inch TFT real color screen (320×240 resolution) for clear readability in any workspace. Powered by an internal 3.7V 3000mAh lithium battery providing up to 6 hours of standby/operating runtime, it offers dependable cordless convenience. Each unit arrives ready to work straight out of the box with the 2C23T main device, a 10× oscilloscope probe, a set of multimeter probes, a crocodile clip probe, a USB data cable, and a user manual.
 
Order the FNIRSI 2C23T in Malaysia Today
 
Equip your personal workbench, student lab, or maintenance toolkit with genuine FNIRSI test and measurement instruments. Visit our showroom in Puchong, Selangor to experience the FNIRSI 2C23T firsthand, or contact our team for technical consultations, product specifications, and competitive quotations.
 
Contact MTM Precision
 
MTM Precision Sdn. Bhd.
 
Showroom & Service Centre
 
No. 29-1 & 29-2, Jalan Bandar 18,
 
Pusat Bandar Puchong,
 
47160 Puchong, Selangor, Malaysia
 
Website: www.mtmpre.com.my
 
Email: mtmpre@yahoo.com
 
WhatsApp: +6016-660 7346
 
Office Tel: +603-80807172

17 Nov 2026