FNIRSI SWM-20 Intelligent Spot Welder in Malaysia: 1200A Dual-Pulse Battery Assembly, Pure Copper Pens, and 5000mAh Power Bank Functionality

FNIRSI SWM-20 Intelligent Spot Welder in Malaysia: 1200A Dual-Pulse Battery Assembly, Pure Copper Pens, and 5000mAh Power Bank Functionality

In Malaysia's growing battery pack assembly workshops, e-bike and power-tool repair centres, mobile phone service benches, and university prototyping labs, joining nickel tabs onto lithium-ion cells requires precise, repeatable energy delivery. Traditional soldering irons transfer excessive heat directly into delicate cell terminals—risking internal separator damage—while low-power hobby welders struggle to penetrate thicker nickel strips consistently. Enter the FNIRSI SWM-20, a newly released Intelligent Portable Handheld Spot Welder engineered around 1200A peak dual-pulse technology to deliver strong, clean, low-heat welds across 0.1mm to 0.5mm nickel sheets, iron sheets, and stainless steel.
 
Compactly built at 133 × 88 × 32 mm and weighing just 307 grams, the FNIRSI SWM-20 features a crisp 2.4-inch HD color display with 0° / 180° screen rotation, tactile button-and-rotary knob controls, and a high-capacity 3.7V / 5000mAh Li-ion battery capable of delivering up to 1,500 spot welds on a single charge while doubling as a 5V / 2.1A portable power bank.
 

1200A Dual-Pulse Welding Precision & Pure Copper Spot Welding Pens

Designed for professional cylindrical battery pack assembly (18650/21700), power bank rebuilding, and smartphone battery flex-tab replacement, the FNIRSI SWM-20 gives technicians granular control over every weld pulse:
 
  • 4 Adjustable Dual-Pulse Welding Parameters: Fine-tune Preheat Pulse (cleans surface oxides), Main Pulse Duration (1–99ms), Pulse Interval Time (1–10ms), and Consecutive Welds / Spot Count (1–9 pulses) alongside Welding Delay (0.1–2.0s) and Spot Interval (0.8–1.2s).
  • 1200A Peak Current for 0.1–0.5mm Materials: Delivers up to 1200A maximum welding current to achieve reliable, low-resistance joints across 0.1mm to 0.5mm nickel strips, iron sheets, and stainless steel.
  • Detachable 32cm Pure Copper Spot Welding Pens: Equipped with two detachable pure copper welding pens featuring thick pure copper wires (32cm total length) for ultra-high electrical conductivity, minimal resistance heating, and rapid heat dissipation during continuous battery pack production.

Multi-Tier Safety Protections, 5000mAh Power Bank & Complete Accessory Kit

Built for safe, dependable operation on busy repair benches and field service sites, the FNIRSI SWM-20 integrates comprehensive hardware protection and a complete ready-to-weld kit:
 
  • Configurable Safety Safeguards: Features programmable Undervoltage Protection (3.7–4.0V), Overtemperature Alert (50–75°C), Short-Circuit Protection, and an adjustable Auto-Off timer (0–99 minutes), certified to CE and RoHS international standards.
  • Dual-Purpose 5000mAh Battery & 5V/2.1A Power Bank: Supports 5V / 2.1A charging and discharging, allowing the unit to serve as a backup USB power bank for mobile devices and bench accessories when needed.
  • Complete Ready-to-Weld Package: Every FNIRSI SWM-20 ships with the main spot welder unit, two spot welding pens, two replacement welding tips, nickel strips, a USB cable, and a user manual.

Order Genuine FNIRSI Spot Welders in Malaysia from MTM Precision

When investing in battery assembly equipment and precision electronic test instruments, partnering with an established local specialist ensures 100% genuine products, knowledgeable technical guidance, and dependable after-sales support. Whether you are equipping a battery pack assembly workshop, outfitting a mobile device repair centre, or upgrading your electronics engineering toolkit, MTM Precision Sdn. Bhd. is your trusted partner in Malaysia for FNIRSI instrumentation and welding solutions.
 
Reach out to our team today for pricing, replacement welding tips, stock availability, or bulk corporate quotations, or visit our showroom and service centre in Puchong, Selangor.
 
Contact MTM Precision
 
MTM Precision Sdn. Bhd.
 
Showroom & Service Centre
 
No. 29-1 & 29-2, Jalan Bandar 18,
 
Pusat Bandar Puchong,
 
47160 Puchong, Selangor, Malaysia
 
Website: www.mtmpre.com.my
 
Email: mtmpre@yahoo.com
 
WhatsApp: +6016-660 7346
 
Office Tel: +603-80807172

17 Nov 2026