All-in-One Grounding Resistance Tester in Malaysia: Exploring the Swevy SW-2200 Dual-Mode Stake & Clamp Ground Tester
All-in-One Grounding Resistance Tester in Malaysia: Exploring the Swevy SW-2200 Dual-Mode Stake & Clamp Ground Tester
Five Grounding Measurement Methods in One Professional Instrument
-
Clamp Method (Non-Intrusive Loop Testing): Ideal for multi-point grounding networks, commercial buildings, telecom towers, and active industrial facilities where disconnecting ground conductors is impractical or unsafe. Simply clamp around the earth conductor to check loop resistance without interrupting operations.
-
2-Wire, 3-Wire, and 4-Wire Precision Stake Methods: Essential for commissioning new earthing installations, testing isolated single earth electrodes, and conducting high-accuracy compliance audits using auxiliary ground rods with ±2% rdg ± 5 dgt precision.
-
Selective Method (Clamp + Stake Combined): Allows technicians to measure individual earth electrode resistance within a parallel multi-grounding network without disconnecting the electrode from the overhead or grid bonding system—saving substantial labor while preventing measurement distortion from parallel paths.
Comprehensive Diagnostic Capabilities Beyond Basic Resistance
-
Wide Ground Resistance Range (0.00 Ω to 20 kΩ): Covers everything from ultra-low-impedance substation and industrial earth grids up to high-resistance dry or rocky soil conditions.
-
Soil Resistivity Testing (0.00 Ω·m to 9999 kΩ·m): Supports electrode spacing from 1 m to 100 m, giving engineers and contractors crucial soil data before designing or upgrading earthing grids and lightning protection systems.
-
Ground Leakage Current Measurement (0.000 mA to 20 A): Detects stray and leakage currents flowing through grounding conductors at approximately 2 readings per second, helping pinpoint insulation issues or unbalanced loads.
-
Ground Voltage Measurement (0.0 V to 600.0 V): Verifies ground potential rise and checks line voltage safety up to AC 600V before and during testing.
-
Automatic Frequency Control (AFC): Automatically selects among 128 Hz, 111 Hz, 105 Hz, and 94 Hz test frequencies to avoid interference from utility harmonics and stray industrial noise, keeping readings stable in electrically noisy environments.
Built for Field Productivity, Clarity, and Long Shifts in Malaysia
-
2.5-Inch Color LCD Screen: Provides crisp, high-visibility readouts and clear mode indicators whether working under bright outdoor sunlight or inside dimly lit electrical riser rooms.
-
Large 65 x 32 mm Jaw Opening: Accommodates larger grounding cables, earthing rods, and wide copper or galvanized flat tapes with ease.
-
Rechargeable 3.7V 2600 mAh Lithium Battery: Charges to approximately 4.2V and delivers over 5,000 measurements per cycle, eliminating the constant expense and waste of disposable dry cells during heavy field schedules.
-
500-Group Data Storage & Data Hold: Stores up to 500 measurement records with clear "HOLD" indicators on screen, making multi-point site audits and post-inspection reporting clean and organized.
-
Complete Field Accessories Included: Comes ready for multi-wire and soil testing with four test leads (20 m red and black leads, 10 m yellow and green leads), two 1.6 m simplified red and black test leads,and four auxiliary ground rods (φ9 x 230 mm), all housed in a balanced 307 x 98 x 56 mm handheld body.
Why the Swevy SW-2200 Is a Smart Investment for Malaysian Engineering Teams
22 Nov 2026