Battery Internal Resistance Tester in Malaysia: Comprehensive Guide to the Swevy SW-3280 Battery Resistance Tester
Battery Internal Resistance Tester in Malaysia: Comprehensive Guide to the Swevy SW-3280 Battery Resistance Tester
Multi-Parameter Battery Diagnostics & Threshold Grading
-
Internal Resistance, Voltage & Temperature Measurement: Performs battery internal resistance testing, battery voltage testing, and temperature measurement in one handheld unit
. -
Wide Measurement Ranges & Fine Resolution: Covers internal resistance from 0.000 mΩ to 3.100 Ωacross four ranges (1 μΩ resolution), voltage from 0.000 V to ±122.0 V across two ranges (1 mVresolution), and temperature from -10.0°C to 60.0°C in a single range (0.1°C resolution)
. -
4-Terminal AC Measurement & Noise Avoidance: Uses a 1 kHz AC 4-terminal test method with open-circuit terminal voltage up to 3 V max and range-dependent test currents from 2.0 mA to 200 mA, while incorporating automatic frequency sweeping from 920 Hz to 1080 Hz to avoid interference noise
. -
Temperature Sensing & Fast Response: Uses an NTC temperature sensor (10 kΩ at 26°C) and successive-approximation A/D conversion with a 5 times/second display update rate, 200 ms response time, and approximately 2 seconds measurement time
. -
Preset PASS / WARNING / FAIL Thresholds: Allows users to preset PASS, WARNING, and FAILjudgment thresholds so technicians can quickly categorize battery cells or blocks during large bank inspections
.
Display Clarity, Data Logging, Connectivity & Field Protection in Malaysia
-
3.5-Inch 16-Bit True-Color LCD: Features a 70.1 x 52.6 mm (3.5-inch) 320 x 240 true-color display that presents resistance, voltage, status indicators, and test modes clearly during field work
. -
Manual & Auto Hold / Storage: Supports both manual hold and storage as well as auto hold and storage, helping technicians capture consistent readings efficiently across repetitive cell-by-cell checks
. -
USB Interface & Bluetooth Connectivity: Includes a USB interface so stored measurement data can be uploaded to a PC to save and print reports, along with Bluetooth connectivity
. -
Rechargeable Battery & Input Protection: Powered by a DC 3.7V lithium battery in a 190 x 121 x 51 mm enclosure, with a maximum input voltage rating of DC 120V between measurement terminals (no AC input permitted)
. -
Insulation, Withstand & Environmental Ratings: Built with insulation resistance above 20 MΩ (at 500V between circuit and housing) and dielectric withstand rating of AC 3700 V/RMS between circuit and housing, with accuracy referenced around 23°C ± 5°C and below 75% RH
.
Where the Swevy SW-3280 Adds Value Across Malaysia
-
UPS & Backup Battery Banks: Screening internal resistance and voltage across cells or battery strings to catch weak units before load tests or power interruptions
. -
Industrial, Telecom & Commercial Facilities: Combining resistance, voltage, and temperature measurements with PASS / WARNING / FAIL presets and auto/manual logging during scheduled maintenance
. -
Inspection Reporting & Record Keeping: Uploading saved data to a computer via USB to save and print maintenance logs
.
22 Nov 2026