Share:
Specifications
SKU: Tenmars TM-81/82/86/87/88 Autoranging Multimeter
TM-81/82/86/87/88 Autoranging Multimeter
This meter is in compliance with safety Standards EN 61010-1 related to electronic measuring instruments.
Application
- This instrument has been designed for use in environments of pollution degree 2.
- It can be used for VOLTAGE measurements on installations of CAT III 1000V or CAT IV 600V.
- Only the original test leads supplied along with the instrument guarantee compliance with the safety standards in force. They must be in a good conditions and, if necessary, replaced with identical ones.
- Do not test nor connect to any circuit exceeding the specified overload protection.
- Before connecting the test probes to the installation make sure that the rotary selector is positioned on the right function.
- Make sure that LCD and rotary selector indicate the same function.
Features
| MODEL | TM-81 | TM-82 | TM-86 | TM-87 | TM-88 |
| Backlit | • | • | • | • | |
| Bargraph | • | • | |||
| DC Voltage | • | • | • | ||
| AC sine voltage | • | • | |||
| DC Current | • | ||||
| AC sine wave Voltage | • | ||||
| AC sine wave Current | • | ||||
| DC and AC TRMS Voltage |
• | • | |||
| DC and AC TRMS Current |
• | • | |||
| Resistance | • | • | • | • | • |
| Continuity test | • | • | • | • | • |
| Diode test | • | • | • | • | • |
| Temperature with type K probe |
• | ||||
| Duty cycle | • | ||||
| Frequency | • | • | • | ||
| Capacitance | • | • | • | ||
| Auto power off | • | • | • | • | • |
| Range hold | • | • | • | • | • |
| Data hold | • | • | • | • | • |
| MAX | • | • | Max/Min | Max/Min | |
| Peak hold | • | • | |||
| REL | • | • | • |
Inquiry - Tenmars TM-81/82/86/87/88 Autoranging Multimeter
