2
Share:
Shinwa 12441 / Small flat stainless steel curved ruler, 30 x 15 cm, same size on both sides, with stopper
Brand: SHINWA JAPAN
Category:
Square Stopper
Specifications
SKU: Shinwa 12441 / Small flat stainless steel curved ruler, 30 x 15 cm, same size on both sides, with stopper
| Product Code | 12441 |
|---|---|
| Product name | Small, flat, stainless steel, 30 x 15 cm, same size on both sides, with stopper |
●By attaching a stopper to the curved ruler, you can draw long marking lines.
●By changing the stop position, you can draw a 45° marking line.
●Height can be measured by installing it in reverse.
●The scale on the curved ruler can be used to measure the dimensions of the marking lines.
●The high stop part firmly contacts the material, allowing you to draw stable marking lines even on chamfered material.
specification
● Body size330.00×178.00×14.00mm
● Product mass
77.00 g
● Corner shape
Same thickness
● Table scale
Long branch: outer scale 30cm, inner scale 5mm pitch 30cm
Short branches: outer scale 15cm, inner scale 5mm pitch 15cm
● Back scale
Long branch: outer scale 30cm, inner scale 5mm pitch 30cm
Short branches: outer scale 15cm, inner scale 5mm pitch 15cm
● Compatible square size
Thickness: 1.4mm or less
Width: 15mm
*Only applies to items of the same thickness.
● Stopper angle accuracy
0.2 mm or less per 100 mm
*This is the accuracy of the square stopper itself. The accuracy will vary depending on the square used.
● Perpendicularity
Carpenter's ruler: 0.1 mm or less per 100 mm
● Length tolerance
±0.2mm
● Material
[Curved length]
stainless
[Stopper for carpenter's ruler]
Body: ABS resin
Screw: Iron
Leaf spring: Copper
Inquiry - Shinwa 12441 / Small flat stainless steel curved ruler, 30 x 15 cm, same size on both sides, with stopper
View more
Square Stopper
