2
Share:
Shinwa 73756 / Digital indicator 0.01mm/12.7mm Dustproof and waterproof
Brand: SHINWA JAPAN
Category:
Dial Indicator
Specifications
SKU: Shinwa 73756 / Digital indicator 0.01mm/12.7mm Dustproof and waterproof
| Product Code | 73756 |
|---|---|
| Product name | Digital indicator 0.01mm/12.7mm Dustproof and waterproof |
Features
●For measuring flatness.●For measuring parallelism.
●For measuring eccentricity.
●With dustproof and waterproof performance of IP54, it can be used in environments where it is exposed to iron powder, chips, water droplets, etc.
●A large font with a character height of 14 mm is used to make measurement values easy to read.
●Touch-type operation panel that can be operated with light force.
●It has a hold function that allows you to fix the numerical value.
● Equipped with a zero set function that allows comparative measurements.
●It can be attached to a stand using the back cover with lugs.
specification
● Body size124.00 x 57.00 x 46.00 mm (with back cover with lugs attached)
● Product mass
121.00 g (with lug back cover attached)
● Power supply
CR2032 1 piece
*The included battery is for monitoring purposes and may have a short lifespan.
● Measurement range
12.7mm
(Values greater than 12.7 mm are also shown, but accuracy is guaranteed within the above measurement range.)
● Measuring power
1.6N or less
● Indication error
±0.02mm
● Outer frame diameter
57mm
● Operating temperature
0 to 50°C
● Operating humidity
-20 to 70°C
● Repeatability
0.01mm
● Scale interval
0.01mm
● Auto power off
After about 5 minutes of inactivity
*Even if the contact point is pressed in, if the value remains stable, it will be determined to be in a non-operation state. Also, auto power off is effective when the hold function is in use.
● Dustproof/waterproof
IP54 (with tip cover attached)
* Prevents dust from entering the interior. Even if a small amount of dust gets in, it will not hinder normal operation.
* Not adversely affected by water splashes from any direction.
● Material
Outer frame: ABS resin
Flat back cover: ABS resin
Back cover with lug: Iron
Front cover: Acrylic resin
Probe: Brass
Spindle: Stainless steel
Battery case: Elastomer resin
● Accessories
Flat-back lid
Storage case
Lithium battery CR2032 (for monitor)
Inquiry - Shinwa 73756 / Digital indicator 0.01mm/12.7mm Dustproof and waterproof
