5
Share:
Specifications
SKU: CUSTOM Digital lux meter LX-3000 with LED mode
Product overview
![[Measurement item] Illuminance](https://www.kk-custom.co.jp/function/function_LUX.svg "[Measurement item] Illuminance")
![[Function] Automatic power off](https://www.kk-custom.co.jp/function/function_AutoOff.svg "[Function] Automatic power off")
![[Function] Hold](https://www.kk-custom.co.jp/function/function_Hold.svg "[Function] Hold")
![[Function] MAX MIN](https://www.kk-custom.co.jp/function/function_MaxMin.svg "[Function] MAX MIN")
In addition to white light sources, illuminance measurement settings can be made assuming LEDs and fluorescent lights.
- The sensor unit can be removed from the main unit, making it convenient for measuring in remote locations.
- The sensor can be rotated 180 degrees while attached to the main unit.
- Maximum and minimum illuminance display (MAX/MIN) function
- Measurement value display (HOLD) function
- Backlight function for easy viewing in dark places
Supports display of illuminance for LED and fluorescent lights
In addition to the illuminance of white light bulbs, the illuminance of LEDs and fluorescent lights can also be displayed as reference values.| light source | Assumed light source |
|---|---|
| White light bulb | 2856K, white light bulb |
| LED lighting (daylight white) | 5000K, 1100lm, 11W equivalent LED |
| LED lighting (warm white) | 3000K, 1055lm, 11W equivalent LED |
| Green LED | LED with a color wavelength equivalent to 560nm |
| Red LED | LED with a color wavelength equivalent to 640nm |
| Blue LED | LED with a color wavelength equivalent to 480nm |
| Fluorescent lamp (warm white) | 4000K, 1350lm, 18W equivalent fluorescent lamp |
| Fluorescent lamp (daylight) | 6500K, 1275lm, 18W equivalent fluorescent lamp |
| Optional settings | - |
The sensor angle can be adjusted and removed
Slide the sensor sideways to remove it from the main unit.
Part names
Main unit
- ① Sensor cover
- ② Sensor (light receiving part)
- ③ LCD display section
- ④ Power button/backlight button
- ⑤ HOLD button
- ⑥ MAX/MIN button/▲ button
- ⑦ Range switch button/▼ button
- ⑧ (Not used)
- ⑨ Settings button
- ⑩ Battery cover
display
- ① Battery level display
- ② Illuminance display
- ③ Light source setting display
- ④ Auto power off function display
- ⑤ MIN display
- ⑥ MAX display
- ⑦ HOLD display
- ⑧ SET indicator (lights up when in measurement light source setting mode)
- ⑨ Range display
360° rotating image
Clicking on the image will open a new window.
Sensor Spectrum
specification
Electrical Performance
| range | Measurement range | resolution |
|---|---|---|
| 200 lux | 0.0 to 199.9 lux | 0.1 lux |
| 2000 lux | 200 to 1999 lux | 1 lux |
| 20,000 lux | 2000 to 19990 lux | 10 lux |
| 200,000 lux | 20,000 to 199,900 lux | 100 lux |
| Measurement accuracy | ±3%rdg ±5 digits (with standard light source) |
|---|---|
| Accuracy Error |
|
| Temperature characteristics | ±0.1% / ℃ (based on 25℃) |
General specifications
| Display update | 0.5 seconds / 1 time |
|---|---|
| Auto Power Off | Approximately 30 minutes (can be canceled) |
| Operating temperature and humidity | 0 to +40°C, 80% RH or less (no condensation) |
| Storage temperature and humidity | -10 to +50°C, 70% RH or less (no condensation, excluding batteries) |
| size |
|
| weight | Approximately 230 g (including batteries) |
| power supply | 2 x AA batteries |
| battery life | Approximately 80 hours (when using alkaline batteries) |
| accessories | Instruction manual, storage case |
| proofreading | Yes (standard light source only) |
| JAN | 4983621200218 |
*Continuous operating time may be shortened depending on the frequency and conditions of use.
Precautions when using a light meter
- In addition to white light sources, illuminance measurement settings can be made assuming LEDs and fluorescent lights, but measurements for all LED and fluorescent light sources are not guaranteed.
- Please note that there may be discrepancies between the actual measurements and those displayed on this device due to differences in color temperature, luminous flux, etc.
- Calibration cannot be performed using an LED light source. Calibration must be performed using a conventional standard light source.
- It does not support PWM (pulse width modulation) controlled lighting.
- Illuminance meters are calibrated using a filament-type light bulb known as a standard light bulb as a standard light source. Fluorescent lamps and LED lighting, which are commonly used in general workplaces, have different wavelengths of light compared to standard light bulbs, so measurements may differ.
In such cases, it may be necessary to take measures such as measuring with multiple illuminance meters (different models from different manufacturers) and taking the average value.
Inquiry - CUSTOM Digital lux meter LX-3000 with LED mode
View more
Testing Instruments
