Name: CUSTOM Data Logger UV Intensity Meter UV-37SD
Brand: CUSTOM
Availability: InStock

CUSTOM Data Logger UV Intensity Meter UV-37SD

CUSTOM Data Logger UV Intensity Meter UV-37SD

Brand: CUSTOM

Category: Testing Instruments

CUSTOM UV Meter UV-340C

CUSTOM Digital lux meter LX-1000

Description

Specifications

SKU: CUSTOM Data Logger UV Intensity Meter UV-37SD

Product overview

Sold separately

*1 Sensor sold separately
*2 Approximately 10 minutes (cancellable)
*3 SD card up to 16GB

This UV intensity measurement logger can measure UVA and UVC rays and record data to an SD card.

In addition to UVA and UVC ultraviolet rays, it is also possible to connect a K/J type thermocouple sensor (sold separately) to measure temperature and record data to an SD card.
Recorded data can be used with commercially available spreadsheet software, making it suitable for a variety of applications. Data recording can be selected from automatic recording or manual recording.
The sampling time for the automatic data logger can be set to any of the following: 1, 2, 5, 10, 30, 60, 120, 300, 600, 1800, or 3600 seconds.
Comes with a green backlight function that makes it easy to see even in dark places.
Equipped with a hold function that temporarily freezes the measurement value on the display.
Comes with a MAX (maximum value)/MIN (minimum value) display function for measurement values.
To prevent battery drain, the device is equipped with an auto power off function that automatically turns off the power if the device is not operated for a certain period of time.

Measurement results can be recorded by inserting an SD card.

The data recorded on the SD card can be imported into spreadsheet software such as Excel as a CSV file.
CT-05SD SD card installation example

The image shows a model in the same series with the same functions.
Microsoft Excel is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

Temperature can be measured by connecting a thermocouple sensor (sold separately).

Compatible thermocouples: K/J type
The image shows a series model with the same functions.
The thermocouple sensor is not included.

Part names

① Display section
② POWER button (ESC button/backlight button)
③ FUNC. button (HOLD button/NEXT button)
④ REC button (ENTER button)
⑤ SET button (▼ button/Time check button)
⑥ LOGGER buttons (▲ button/Zero button/Sampling check button)
⑦ UV sensor input socket
⑧ Temperature sensor input socket
⑨ SD card socket
⑩ RS232 output terminal
⑪ Reset button
⑫ DC9VAC adapter input socket
⑬ Battery cover
14. Battery cover screws (2 pcs)
⑮ Stand
⑯ Tripod screw hole
⑰ UVC sensor socket
⑱ UVC sensor
⑲ UVA sensor
⑳ UVA sensor socket
22. UVA sensor cover

▲Back to top of page

specification

UV rays

kinds	range	resolution	Measurement accuracy
UVA/UVC	0 to 1.999 mW/ ^cm²	0.001 mW/ ^cm2	±(4% FS + 2dgt)
UVA/UVC	2.00 to 20.00 mW/ ^cm2	0.01 mW/ ^cm2	±(4% FS + 2dgt)

FS = full scale

Recommended UV wavelengths to be measured

kinds	wavelength
UVA sensor	320-380nm (calibration ultraviolet wavelength: 365nm)
UVC sensor	200-280nm (calibration ultraviolet wavelength: 254nm)

Please use each sensor to measure the UV rays with the wavelengths listed above. When using a UVC sensor, if the light being measured contains UV rays with wavelengths other than 200-280 nm, such as natural light, the measurement may not be accurate.

Equipment that uses wavelengths including the UVA range (examples): tanning beds, reptile breeding lights, plate-making lamps, black lights, etc.
Devices that use wavelengths including the UVC range (examples): sterilizing filters for ornamental fish, ultraviolet treatment devices for athlete's foot, sterilizing lamps, etc.

temperature

kinds	Measurement range	resolution	Measurement accuracy
K-type	-50.0 to +1300.0°C	0.1℃	±(0.2%rdg + 0.5℃)
K-type	-100.0 to -50.1°C	0.1℃	±(0.2%rdg + 1°C)
J-type	-50.0 to +1100.0°C	0.1℃	±(0.2%rdg + 0.5℃)
J-type	-100.0 to -50.1°C	0.1℃	±(0.2%rdg + 1°C)

The above measurement accuracy does not include the accuracy of optional sensors.
We do not carry J-type thermocouple sensors.
Using the sensor for purposes other than its intended use or handling it roughly may result in damage to the sensor or injury, so please select a sensor that is suitable for your purpose.
Depending on the object being measured and how it is used, the sensor may be damaged.
Please use the sensor within a temperature range with sufficient margin.

General specifications

display	4-digit LCD display
sampling	Approximately 1 time/second
Auto Power Off	Approximately 10 minutes (can be canceled)
Operating temperature and humidity	0 to +50°C, 80% RH or less (no condensation)
Storage temperature and humidity	-10 to +60°C, 85% RH or less (no condensation)
size	Body: Approx. W 68 x H 177 x D 45 mm UVA sensor: Probe head Φ45 x 32 mm, handle Φ24 x 125 mm, cord retracted: approx. 350 mm UVC sensor: Φ38 x 27 mm, when cord is extended: approx. 350 mm
weight	Main unit: Approx. 350 g (including batteries) UVA/UVC sensor: approx. 100 g
power supply	6 AA batteries or AC adapter (sold separately)
battery life	Normal measurement: Approx. 280 hours Data logger function operating: Approximately 70 hours (backlight off, alkaline batteries used)
accessories	Instruction manual, UVA sensor, UVC sensor
proofreading	Possible
option	AC adapter: VSM-932EK K-type thermocouple sensor: LK model number product
JAN	4983621230376

About SD cards

Although commercially available SD cards (1-16GB) are compatible, operation has not been certified for all SD card products from all manufacturers. Please note that some SD cards may not be compatible.
The SD card is not included and must be purchased separately.
Other types of memory cards, such as SDXC cards and MMC cards, cannot be used.
SDXC and SDHC are registered trademarks of the SD Association.