Name: CUSTOM Data Logger Anemometer WS-03SD
Brand: CUSTOM
Availability: InStock

CUSTOM Data Logger Anemometer WS-03SD

Brand: CUSTOM

Category: Testing Instruments

CUSTOM Digital Wind Speed/Volume Meter WS-06

CUSTOM Digital Anemometer CW-20

Description

Specifications

SKU: CUSTOM Data Logger Anemometer WS-03SD

Product overview

hot wire type

Built-in

Sold separately

*1 Sensor sold separately
*2 Approximately 10 minutes (cancellable)
*3 SD card up to 16GB

An anemometer that can also record data to an SD card.

It is possible to measure wind speed and ambient temperature using the temperature sensor in the wind speed sensor section. Temperature can also be measured using separately sold K-type and J-type thermocouple sensors.
The anemometer uses a hot wire method, which is convenient for measuring minute wind speeds. The sensor probe is extendable, making it convenient for measuring at high altitudes.
The recorded data can be used with commercially available spreadsheet software, making it suitable for a variety of purposes.
Data recording can be selected from automatic recording or manual recording.
The sampling time for the automatic data logger can be set to any of the following: 1, 2, 5, 10, 30, 60, 120, 300, 600, 1800, or 3600 seconds.
Comes with a green backlight function that makes it easy to see even in dark places.
Equipped with a hold function that temporarily freezes the measurement value on the display.
Comes with a MAX (maximum value)/MIN (minimum value) display function for measurement values.
To prevent battery drain, the device is equipped with an auto power off function that automatically turns off the power if the device is not operated for a certain period of time.

Measurement results can be recorded by inserting an SD card.

The data recorded on the SD card can be imported into spreadsheet software such as Excel as a CSV file.
CT-05SD SD card installation example

The image shows a model from the same series with the same functions.

Temperature can be measured by connecting a thermocouple sensor (sold separately).

Compatible thermocouples: K/J type
The image shows a series model with the same functions.
The thermocouple sensor is not included.

360° rotating image

Clicking on the image will open a new window.

Part names

①Display section
②POWER button (ESC button/backlight button)
③FUNC. button (HOLD button/NEXT button)
④REC button (ENTER button/Unit button)
⑤SET button (▼ button/Time check button)
⑥LOGGER button (▲ button/Sampling check button)
⑦Wind speed sensor input socket
8. Temperature sensor input socket
9. SD card socket
⑪RESET button
⑫DC9V AC adapter input socket
⑬Battery cover
14. Battery cover screws (2 pcs)
⑮Stand
⑯Tripod screw hole
⑰Wind speed sensor plug
⑱Sensor probe
⑲Sensor head

▲Back to top of page

specification

Electrical Performance

wind speed

unit	range	resolution	Measurement accuracy
m/s	0.20 to 5.00 m/s	0.01 m/s	±(5 %rdg + 0.1 m/s) or ±(1 %fs + 0.1 m/s), whichever is greater
m/s	5.1 to 25.0 m/s	0.1 m/s
km/h	0.70 to 18.00 km/h	0.01 km/h	±(5 %rdg + 0.3 km/h) or ±(1 %fs + 0.3 km/h), whichever is greater
km/h	18.0 to 72.0 km/h	0.1 km/h

fs = full scale

temperature

kinds	Measurement range	resolution	Measurement accuracy
Wind speed sensor	0 to +50°C	0.1℃	±0.8℃
K-type	-100.0 to -50.1°C	0.1℃	±(0.4%rdg + 1°C)
K-type	-50.0 to +1300.0°C	0.1℃	±(0.4%rdg + 0.5℃)
J-type	-100.0 to -50.1°C	0.1℃	±(0.4%rdg + 1°C)
J-type	-50.0 to +1100.0°C	0.1℃	±(0.4%rdg + 0.5℃)

The above measurement accuracy does not include the accuracy of optional sensors.
We do not carry J-type thermocouple sensors.
Using the sensor for purposes other than its intended use or handling it roughly may result in damage to the sensor or injury, so please select a sensor that is suitable for your purpose.
Depending on the object being measured and how it is used, the sensor may be damaged.
Please use the sensor within a temperature range with sufficient margin.

General specifications

sensor	Wind speed sensor: Hotwire Temperature sensor: Glass bead type thermistor
Auto Power Off	Approximately 10 minutes (can be canceled)
Operating temperature and humidity	0 to +50°C, 85% RH or less (no condensation)
Storage temperature and humidity	-20 to +60°C, 85% RH or less (no condensation)
size	Body: Approx. W 68 x H 180 x D 45 mm Telescopic wind speed sensor: Approx. Φ12 x 250-950 mm, cable length: Approx. 1.2-1.9 m
weight	Approximately 360 g (including batteries)
power supply	6 AA batteries or AC adapter (sold separately)
battery life	Normal measurement: Approximately 45 hours (wind speed measurement, backlight off, alkaline batteries used) Data logger function: Approx. 31 hours (wind speed measurement, backlight off, alkaline batteries used)
accessories	Instruction manual, wind speed sensor, storage case
proofreading	Possible (air volume not possible)
option	AC adapter: VSM-932EK K-type thermocouple sensor: LK model number product
JAN	4983621270037

The above performance is at 23 ± 5°C

About SD cards

Although commercially available SD cards (1-16GB) are compatible, operation has not been certified for all SD card products from all manufacturers. Please note that some SD cards may not be compatible.
The SD card is not included and must be purchased separately.
Other types of memory cards, such as SDXC cards and MMC cards, cannot be used.
SDXC and SDHC are registered trademarks of the SD Association.

Microsoft Excel is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

Inquiry - CUSTOM Data Logger Anemometer WS-03SD

Name*

Email*

Contact Number*

Message (optional)